Bench for the dacha made of wood. Bench with back - simple and comfortable garden furniture

Benches for a summer house made of boards

One of the most necessary items At the dacha there is an ordinary bench. It's nice to sit on the bench in the shade on a hot summer day or in the evening at the end of a hard day. Stores offer wide choose park and country benches, however, a number of difficulties arise here. Firstly, the cost of such a product is quite high and the quality may not be satisfactory. And secondly, there is a problem with delivering the product to the summer cottage.

All these problems can be solved if you do DIY garden bench. The main advantages in this case are the availability of materials for manufacturing, as well as the ability to design a bench of a convenient configuration. Based on these tasks, we propose a design for a bench for your dacha, which you can make yourself. For this, 2 x six meters will be enough. By cutting them into pieces 1.5 meters long, they can be transported to their destination quite easily.

Get forty-millimeter boards to ensure sufficient reliability and strength of the bench. Considering the location of the benches on the street, gaps are made in the back and seat to remove rainwater. Therefore, the total seat width of the benches is forty centimeters, which ensures comfortable sitting on it. The 18° backrest angle is chosen for better ergonomics. Tools you will need are a hacksaw, a drill with wood drill bits, electric jigsaw, screwdriver (screwdriver) and available materials (square, pencil, tape measure).

Dimensions for a wooden bench

Making a bench for a summer house

First, let's prepare boards and beams of the required size. You need to have 5 one and a half meter boards, 2 360 mm boards. and two - 52 cm each, which are then sawn into 4 beams, which we will use to fix the legs and seat. The legs and backrest holder will be two 720 mm boards on which the cuts are made. The cut boards are planed to remove burrs. After removing the fissures, you need to make the edges of the boards and beams smooth. Before installation country bench To extend its service life, the wood is treated with an antiseptic. To give the desired shade, you can use a colored antiseptic.

Scheme - drawing: Bench with back

We will begin the installation of a bench made of boards with the legs, which we will connect to each other with crossbars and self-tapping screws. When using boards and timber to construct a bench for the dacha, you must be very careful about the correct formation of the legs. The stability of the structure itself depends on them. By deepening the legs into the ground you can significantly improve the stability of the bench. You can use hemp or log stumps as legs. It is advisable to connect the joints of the bench with wooden dowels (as shown in the video).

Self-tapping screws are used to attach the seat and back boards to the bench legs. If they are not long enough, you need to make a hole in advance that is larger than the diameter of the screw head. The clamps are made with reverse side to make the fastener invisible. Having determined the most convenient angle of the backrest, we secure the stops with self-tapping screws using corners and plates.

Installation of bench backs

On final stage The legs of the garden bench are fastened together by installing a lower cross member. Treating them with mastic will help prevent your feet from absorbing rain moisture. For this, a bucket of protective composition Heats up over a fire until the mastic becomes liquid. Turning the garden bench over, carefully brush the legs over the entire surface with a brush. For complete drying, you need to wait one day and only then further processing is carried out.

The assembled product is coated with yacht varnish or special impregnation. Naturally, the varnish coating looks much better, but at the same time the varnish surface becomes colder. Covering the surface of a garden bench with one layer makes it rough. You can achieve a smooth, shiny surface of the bench using special technology.

At the same time, after waiting for the first layer of varnish to dry, the board is treated with sandpaper and coated with varnish twice more; after drying, you can use the bench.

Note! If you want to save time and purchase a finished product, we advise you to contact the Kupistol company. It is famous for the quality of the furniture it sells, excellent service (fast delivery, same-day assembly, return options) and low prices. There is a huge assortment of furniture for home and garden, so every buyer will be able to choose furniture based on different criteria such as design, material, cost, etc.

Done garden bench with your own hands - this is not just for relaxation, but an object for decorating a personal plot. Thanks to original street benches, you can create entire compositions in landscape design that will delight the eyes of owners, guests and others. This will be the simplest, most affordable and exclusive option for your garden, since making a bench with your own hands is not difficult. It’s enough to choose the right design and materials, choose the right location and apply a little imagination.

Finding a suitable location for the bench

Why choosing a location is so important for placement garden bench? If a personal plot needs a bench, then a lot of time will be spent in this place. Therefore, the view that will open in front of those sitting and the surrounding atmosphere are very important.

Current and appropriate combinations:

Preparatory work: where to start

After selection optimal location To install a bench for the garden, you can start designing the future product. You need to start with preliminary calculations and planning:

1. Determination of size. When creating a bench with your own hands, you can use ready-made calculations of parameters that can be found on the Internet, or you can design an individual model, which will take a little more time.
2. Thinking over the method of attaching the backrest. Making a regular bench without a back is much easier and faster. But with backs, the models not only look more advantageous, they open up a wide range of creativity and are much more convenient to use.
3. Leg design. To determine this parameter, you need to rely on the mobility of the product. For example, permanent structures can be fixed in the ground using cement.

Best for identifying everyone required parameters ready-made drawings and photos of garden benches with your own hands help.

Review of all kinds of materials

Do-it-yourself garden benches can be created from various materials, each of which has its own characteristics. Knowing these nuances will help you take advantage of each material.

Wood is considered a universal material for creating any furniture, including outdoor furniture.

For garden attributes, the type of wood does not matter much, but it is better to choose varieties that are easier to process and are dry. A do-it-yourself bench made of wood will look better if a part of the solid wood without flaws is selected for it.

Plastic allows you to create lightweight products that are easy to move. This material comes in a huge range of different shades. But plastic also has its disadvantages, including:

• cheap appearance of the product;
• low reliability;
• susceptibility to burnout;
• difficulties with the manufacturing process.

If you have soldering skills, the process of creating a product is greatly facilitated; you can also use liquid nails for fastening.

The stone gives the finished benches a very unusual look and special delicacy. Recreational items are ideal for any style of already designed landscape.

But this material is more suitable for established production, since making a bench with your own hands from stone is much more difficult than from other materials. In addition, the stone also has several disadvantages:

• difficulty moving;
• hardness of the surface and lack of comfort while sitting;
• a bare stone surface is harmful to health if you sit on it without additional insulation.

Metal always looks elegant in landscape design. Handmade forging will make a bench ideal place your garden.

Very often, finished products use a combination of metal with other materials, most often with wood; glass also looks great.

The main criteria for the right bench

Any DIY bench should not only become the best decorative decoration for your garden, but also meet a number of requirements:

1. To be safe - during design, errors or inaccurate calculations must not be made. If the design of the product is unreliable, you may experience discomfort and be at increased risk of injury during operation. Therefore, you only need to choose quality materials, fasteners and accessories.
2. Resistance to external factors - to increase durability and preserve the original appearance, you should give preference to solid materials. If you plan to construct a bench from wood, then additional processing of the material is necessary, which will give it reliable protection.
3. Comfort is the main requirement for any place for sitting and relaxing. Therefore, it is worth taking care of this point in advance at the planning stage.

Making a Bench from Pallets

The simplest and affordable option DIY wooden benches are a product made from pallets. If you add a little imagination during the work process, you can get a unique and original item for landscape. 3-4 will be enough wooden pallets, some of them will have to be divided into several more parts.

The simplest option is to fasten two perpendicularly, which results in a seat and a backrest.

Since pallets are quite bulky, so that the resulting structure does not turn out to be rough and large, the pallets must be cut in accordance with the selected dimensions.

All parts of the bench will be connected with self-tapping screws. Using self-tapping screws, the side strips are attached to give the product greater reliability and strength, as well as the legs of the bench.

The pallets themselves are a rough, rough and untreated material, so additional sanding will be required to avoid splinters in the future.

The final stage of creating such a bench is coating with paint or varnish. For comfortable sitting, you can place soft covers or pillows.

Bench made from old unwanted chairs

You can create garden benches with your own hands from any available materials, for example, they can be old unnecessary chairs. For finished product You will need 4 chairs with backs.

The seats are removed from all of them, and parts from the front side of two more are removed.

For others, the front legs under the seat base need to be sawed off.

Workpieces must be cleaned of old paint or varnish using a special solvent. When the coating softens, it is removed with a spatula.

The next step is creating holes for the dowels. They need to be drilled into the posts on the end and front sides.

Dowels, previously coated with glue, are inserted into the prepared holes.

After the glue has dried, you can begin to assemble the base of the bench. To increase the strength of the structure, self-tapping screws are used for fastening. You need to go over the surface of the future product with sandpaper.

To seat the bench, you need to additionally select a board that is appropriate in size and cut off the excess on it. You can use several narrow boards, which are fastened together with wood glue.

The surface itself is also attached to the base using wood glue. For better bonding, heavy objects are placed on top of the board.
After the glue has completely dried, it is necessary to cover the seat masking tape, and cover the rest of the structure with wood paint.
After the paint has dried, the tape can be removed and the boards can be stained.
The final step is to completely coat the entire bench with varnish.

Turning a log into a bench

For such a do-it-yourself wooden bench, drawings will be superfluous. Here you can completely trust your own imagination and creativity. You will need a log of any shape you like, about 1 meter long, and a chainsaw. The thicker the log, the more spacious the bench will be.

You need to apply markings to the log in order to cut it into 2 unequal parts. The smaller one will go on the back, and the larger one will be used as a seat. Using a chainsaw, the log is sawed along the mark and all irregularities are immediately removed.

Then in the resulting parts you need to cut out a triangular part, which will be used as a fastening called a “dovetail”. Such recesses are cut out both in the seat and in the back.

The resulting triangular layer must be cut into pieces and inserted into the holes of the future seat, and secured at the top into the backrest.
The DIY bench is almost ready, all that remains is to decorate it.

You can use small logs as legs, tightly securing the bench to them, or experiment with other options.

Metal bench

You can independently make not only wooden benches, but also metal benches. Most often, a metal frame is used; making it will not be difficult even for those who do not have experience in forging. To create the frame, the cold forging method is used, in which you can add any details and decorations to the product.

Making a metal bench with wooden base and the back goes through the following main stages:

1. Sizing – you can independently calculate all the main parameters for a future project or use standard measurements. In them, the seat length will be 1.5 m, width 0.5 m, and backrest size 90 cm.
2. Creating a frame. The first step is to make the seat. You will need 2 pieces of pipe, 150 cm and 40 cm long. To increase the strength of the product, additional transverse and longitudinal stiffening ribs are welded to the pipes.
3. Making legs. By standard scheme The length of the legs is 46 cm. It is to this length that the pipes are cut. To increase the degree of stability of the interior item, it is necessary to first connect all four legs to each other.
4. The design of the back consists of welding pipes measuring 150 cm and 44 cm to each other. When this stage is completed, the back is attached to the finished part of the product. The optimal backrest tilt is up to 20°. It allows you to provide maximum comfort during operation.
5. Carrying out polishing - cleaning all existing joints, polishing the metal and coating with primer.
6. Preparation wooden parts. These elements are attached on top metal frame. They give the bench a finished look. They can be made from timber or boards; the dimensions can be selected to match the dimensions of the finished frame. The wooden parts must already be fully prepared, have a smooth processed surface without roughness or damage.
7. Fastening parts. An electric jigsaw is used to attach the wooden parts to the forging, it is also necessary to drill several holes in the base and wooden elements to fasten them. The fastening parts are bolts with rounded heads and nuts.
8. The final stage is covering the wooden areas with stain and then varnish. These actions will help the material last longer and protect it from negative impact external factors.

Drawings of simple garden benches made of wood:

The finished bench will have a lot of positive aspects. For example, ease of transportation - due to the combination of materials, the product will be lightweight and resistant to temperature changes, which allows you to effectively use the bench outdoors for several years in a row without compromising its appearance.

Ideas for outdoor benches

beautiful and a comfortable bench to decorate the garden, you can make it from absolutely any available materials that can support the weight of a person. You can implement one of the proposed ideas:

When creating garden benches with your own hands, it will be useful to use basic recommendations that will make your work easier and help you avoid some difficulties:

• when purchasing material, it is necessary to take into account the share of losses of about 10%;
• to save material and avoid waste, you need to start cutting from the longest boards;
• when deviating from standard sizes and creating a seat of greater width, the likelihood of wood sagging in the absence of a reliable frame should be taken into account;
• to increase the safety of the product, it is necessary to eliminate all sharp and angular edges in advance;
• at self-creation In all drawings and calculations of wood structures, one must remember the susceptibility of the material to drying out.

DIY bench with backrest - video

There is, perhaps, no such yard, no matter where there is a bench - an invariable attribute of relaxation and communication. This item is convenient and useful, found everywhere both outdoors and indoors. There are countless forms of bench designs, however, they are all united by two basic principles of construction: stability and comfort. You should build on them when making a bench with a backrest with your own hands.

Types and features of bench designs

The classic design of a bench is a seat, back and supports. It can be complemented by armrests, a built-in table, a canopy from rain and sun, and much more. The form can be simple, minimalistic or of unprecedented beauty and complexity, the main thing is that it harmoniously complements the surrounding space and is comfortable for relaxation.

The idea of ​​what the shop will be like depends on the following points:

• Accommodation area:
• in the garden, near the house (they decorate the area, have a mostly stationary, convenient form);
• terrace (lightweight, convenient for tea drinking and socializing);
• barbecue or relaxation area (the form must be designed for a certain number of people);
• near water (corrosion- and rot-resistant material of the bench);
• The installation location is permanent or the bench needs to be moved, brought in/out;
• Shape: straight, round, semicircle, angular, curved;
• Materials of manufacture: wood, metal, stone/concrete, combination of materials.

At home, in the country, the material for constructing a bench is often improvised materials, used things, such as a bed, a door, a closet, pallets (pallets), chairs, logs, driftwood, cinder blocks and much more. The result is original, interesting items in a vintage or rustic style. Pallets and furniture made from them have become an “untilled field” for ideas, a fairly common creative material.

In the design of the bench you can include useful elements, for example, make the seat folding, and use the sewn-in space under it as a storage capacity. A folding table would be useful as part of the design of a bench or shoe rack under the seat of a bench in the hallway.

Designing a comfortable bench with a back

Let's start looking at the design with the support posts. They often have P or X-shape, their stability has been tested by experience. The form can also be solid (wooden beams, stone slabs), cast (formed from cast iron or concrete, the back goes into supports), in the form of legs, curved metal or forged elements.

The seat is a part of the bench that should be comfortable and resistant to stress. It is made continuous or with intervals (wooden blocks, metal pipes, rods). The solid seat is comfortable, however, it is necessary to ensure that water does not stagnate on it after precipitation. The edges of the seat should be rounded to avoid injuring your legs. The optimal length is 1500 mm, width 400–450 mm, length of one seat 480 mm (of course, all sizes are selected individually). There are designs where the seat and backrest are made in one line (the backrest smoothly transitions into the seat by means of a bend), such benches are comfortable, often found in city parks, their supports are cast from cast iron or concrete, this shape can be repeated in wood or bent from profile pipe.

A significant part in the convenience of the bench is given to the distance from the seat to the ground (floor) level; it should be 400–450 mm. It is necessary that the feet touch the base.

The backrest turns the bench into an object for long-term rest; it allows you to relax not only the leg muscles, but also the back muscles. An important role here is played by the angle of inclination relative to the seat and the height of the backrest. Based on human physiology, 10–20 degrees is considered the most comfortable. angle of deviation of the back from the perpendicular, height from 360 mm (since the human spine has an S-shaped bend, the height of the back is divided into two parts: 180–240 mm to the fulcrum - the place where the back does not fit and + another 180–240 mm - segment of contact with the back). The back should not be massive and outweigh the bottom of the structure.

Advice! The gap (clearance) between the back and the seat should not be made large if the person will sit on the bench Small child he will not have the opportunity to lean his back.

Choosing material for making a bench with a back

The most convenient and budget material for production is wood. Wooden bench combines a balance of beauty and comfort, looks great in any space. Wood is a pliable material for the manufacture of various shapes and decorative elements, has a pleasant tactile sensation, does not overheat in the sun and does not overcool in the cold.

A simple wooden bench can be made quite quickly with your own hands; a minimal set of tools is needed. You can use inexpensive types of wood. Moisture resistance ultraviolet radiation, fungal and insect damage are provided by modern protective equipment for impregnation and coating of wood surfaces. The weight of the product is optimal for moving.

The disadvantage of wooden benches is their fragility; wood tends to dry out over time and the joints become loose. The structure can be strengthened by various assembly elements and fastenings made of metal (corners, threaded ties, self-tapping screws instead of nails) and strengthening joints with glue. If supports need to be dug into the ground, they should be protected from rotting by soaking them in oil/resin-containing products.

Advice! Wood is a flammable material, so a bench located near a fire (fire, barbecue, stove) must be treated with a fire-resistant solution (fire retardant), which will help resist fire for some time.

Metal is a reliable and durable material with proper care and operating conditions. It produces sophisticated, “airy”, “lace” designs. The main disadvantage is corrosion, which is eliminated by protective coating of surfaces with primer, paint, enamel, repeated periodically as necessary. Flexible metal can be shaped into different shapes. The design of the bench from square profile pipes will be stable, solid and light. The square section is the most convenient to install. The most beautiful benches are made from forged elements.

The assembly of the metal product is very strong, carried out using welding seams and threaded fasteners. The need to have a welding machine and the ability to use it makes installation at home somewhat difficult.

The seat and back of a metal bench are almost always covered with pillows, covers, or a blanket, since tactile sensations are not always pleasant. The thermal conductivity of metal is higher than that of wood, so achieving a comfortable temperature balance between the body and metal surface It’s difficult, and it’s pointless to heat the bench with yourself.

The concrete bench is practically a sculpture. In this case, any shape can be achieved with a lot of effort and effort. A frame assembled from metal is placed in formwork and filled with concrete (the concrete hardening period is 1–2 months). Basically they make some parts of the structure and combine them with other materials. It is heavy and not intended to be moved. There is no doubt about immobility. Resistant to any weather conditions, durable.

Concrete complexes of benches and containers for planting plants with the installation of lighting elements look great. Practical for placement near the water.

Advice! For heavy benches, you should prepare a flat platform from layers of sand, gravel, and crushed stone so that it does not sink into the ground.

The most common type of bench is a design with a combination of materials. It is preferred in most cases, since it can be combined reliable frame(metal), comfortable seat with back (wood), while achieving beauty, durability, convenience and lightness of form.

When buying material, make sure of its quality; you need to choose a dry tree so that it does not leak; remember the size of the parts. If there is a drawing with the specified dimensions, the material can be cut at the place of purchase, which will facilitate its transportation.

Drawing, material calculation, preparation for construction

A do-it-yourself bench begins with an idea, which is first embodied in a drawing. The drawing must be accurate and detailed and will need to be referred to throughout the work. You can make two drawings: a bench frame and a seat with a back, if the materials are different. The option when the supports are dug in (concreted) must provide for an additional length of the supports.

The drawing of the bench will show the number of parts, and the dimensions will help determine the amount of material consumed.

Tools: saw, plane, drill, tape measure, angle meter, wrench.

Materials: pine board 25x75 mm, 40x80 mm, 40x120 mm, bolts with nuts 9 mm - 8 pcs., self-tapping screws, sandpaper.

File parts into the right amount to size, sand. Proceed with assembly.

How to make it yourself: the order of connecting parts

1. Assembling the bench supports: mark and drill holes for the bolted connection, before fixing the parts with clamps. Tighten the connections of both sidewalls;
2. Connecting supports with jumpers: attach power jumpers to the structures of the side supports using self-tapping screws according to the drawing;
3. Assembling the backrest and seat: screw the strips to the side supports with self-tapping screws, maintaining an even gap between them. Recess the heads of the screws into the strips;
4. Grinding joints and sharp corners;
5. Application of decorative and protective coatings.

If there is a desire to emphasize the texture of the wood, then the surface is treated with a non-water-based stain (untreated wood swells with water) of the selected color, then the surface is varnished in several layers according to the instructions on the packaging (the varnish should be for external purposes with good wear resistance, for example, yachts). varnish). Between applying layers, the varnish must dry (dust stage - when dust does not stick to the surface and can be wiped off). Before applying the next layer, the previous one needs to be lightly sanded; this will not affect the transparency of the varnish.

If you decide to paint a bench, then before painting you need to apply a base (a product for protecting and reducing wood porosity) to the surface; it will give a good adhesive effect and the paint will last longer. Then apply paint for exterior purposes in several layers.

All painting work should be carried out outdoors; a respirator must be used indoors.

To make it more decorative, you can brush the surface; the structure of the wood will become more expressive. The naturalness of wood is emphasized by the application of impregnating oil-wax products with a water-repellent and protective effect.

Today, the choice of means to protect wood, as well as all kinds of paint coatings represented very widely. It will not be difficult to find a product that will combine the necessary qualities.

Whatever material and design is chosen, the bench will be unique because it was made by hand. Remember about safety measures; all work must be accompanied by the use of protective equipment.

We will send the material to you by e-mail

To make your garden plot comfortable to use and beautiful, you need to use such elements landscape design, like flower beds, paths, gazebos, etc. Garden furniture is especially important. This is what guarantees your convenience.In our review we will find out how to construct a garden bench with a backrest with your own hands. Drawings and detailed photos will allow you to make the best design.

Comfortable garden furniture is a wonderful addition to the garden ensemble

Before you make a bench for your dacha with your own hands, let's figure out what types of this design exist. Classification can be made based on factors such as material, functionality and characteristics.

Benches can be just a piece of furniture designed for sitting, or have a multi-functional purpose. For example, used as a rocking chair or table.Original benches – swings – are also popular. Designs with backs that are stationary are in demand. They are made of brick or concrete. There are also folding benches.

The following materials are most often used for the manufacture of products:

• plastic options are lightweight and resistant to all kinds of climatic changes;

• wood great solution for anyone summer cottage. This traditional version, which has many advantages;

• metal can be used in two configurations, from profile lines or as a forged structure;

• to the very durable material applies stone. For a bench, you can take two boulders, and also use purchased material.

You can even make the product from concrete. There are also combined options DIY garden benches with backrest. The drawings will help you build a structure from any material. You can combine a metal frame with wood slats. You can also combine stone and wood.

Benches can have different designs:

• a simple option - a bench without a back;
• you can also build a bench with a backrest with your own hands;
• a bench with a table is suitable as an option for the garden;
• a bench with a canopy is used as a miniature gazebo.

When creating designs in artistic style Special attention is given to appearance. Instead of side parts, all kinds of shapes can be used.

When creating drawings, it is important to consider general form products, as well as all dimensions of the structure. Furniture made of wood, forged steel or stone will fit perfectly into a garden created in classic style. A plastic products suitable for landscape design in a modern style.Where to place the bench matters. You can place it near the porch, or also place it in the back of the garden under a beautiful tree.

For your information! A bench made of wood can be used comfortably at any time of the year, since the level of thermal conductivity is lower than that of stone and metal.

Original benches for a summer house made of metal and wood

You can try making a metal or wooden bench with a backrest with your own hands. Metal products are known for their particular strength. However, they do not require constant attention. They can be coated with a special anti-corrosion compound only once a year.Modern designs using forged elements are made using a welding machine.

Wood is used to make benches with beautiful design. These products are suitable for almost anyone landscape design. To protect similar designs You can use special varnishing compounds.

This will protect wooden surface from the development of mold, fungi, as well as sun rays. Rarely does anyone use it completely hardware, since they cool down greatly in the cold season and heat up in the heat. Most often from of this material

load-bearing elements and legs are made, and the back and seat are made of wood. Rectangles are made from a profile pipe, and then jumpers are welded to the side walls for support. You can build more functional design

with armrests, soft pillows and backrest.To create smoother lines, you can bend the pipes. This will result in furniture with rounded edges.

Benches made from boards are popular. The design can be made in the form of a sofa, and pillows can be placed on top.

For your information! You can also build a simple bench with your own hands from wood. In this case, the legs can be in the shape of the letter X. From the boards you can make a bench in the shape of the letter P. In this case, it is necessary to ensure rigid fixation of the seat and legs. The use of special coating compositions will allow for a long time

preserve the natural pattern of such materials.

Photos of do-it-yourself stone benches You can make a garden bench with a backrest from stone with your own hands. This material has high performance properties and significant strength. Stone structures can be used for any garden style and design. Use of stone elements to complement general design. Such furniture looks good against the backdrop of a building that has individual stone details.

For your information! A stone bench will make a wonderful combination with stone flower beds, steps, ponds and paths. Such benches are often combined with wood.

Marble is often used to build such benches. Sometimes quartzite and even coarse granite are used.

Photos of garden benches with your own hands: how to make them from scrap materials

• Plastic products also have certain advantages. Here they are:
• low weight of the structure, which ensures its lightness;
• affordable price;
• a wide variety of colors;

practicality. You can use all kinds combination combinations , which will differ or be combined in texture, color palette

and materials. A good solution is the combination of stone and wooden parts.

Try to make original combined designs. This can be a sandbox bench for children, as well as a flowerbed bench.

To make a bench with a wooden backrest with your own hands, you first need to understand its design. A simple device involves sitting on some supports. But there are also products that have a non-standard configuration, designs with forged or carved parts, as well as furniture with armrests.

A simple solution is to use two boxes and a couple of boards. In this case, the boxes will be installed as supporting elements. They can be filled with soil and made into them beautiful flower bed. A seat is assembled from boards, which is installed between the drawers. Be sure to sand the surface using sandpaper. For a more practical design, you can replace the boxes with stone or concrete pedestals. Seats can be made from halves of logs or from treated boards. The seat must be secured using metal corners. Dowels are used to attach them to concrete bases. And fixation to wood can be done using self-tapping screws and through bolts.

Image	Stages of work
	Will need detailed drawing with all sizes
	The workpieces must be polished. The rear legs also provide support for the back. All blanks are pre-marked.
	At a height of 40 cm, mark a place to fix the seat. Then the board is cut at an angle of 20 degrees. The front and rear legs are attached using timber.
	The side parts are attached using seat boards. They are screwed in with self-tapping screws. To secure the structure, you need to tie it using a beam. Two boards are attached for the back.
	Finally, a special coating is applied to protect against precipitation.

Helpful information! Flowerpots with decorative bushes and dwarf trees can be used as supports.

Bench with storage box

You can build a convenient design with storage boxes. It is worth using old furniture. Before work you need to select correct screws. Their thickness should correspond to the thickness of the wooden elements.

A bench with a drawer is a wonderful solution for a loggia and balcony. In this case, you can use the old balcony. The design with a drawer consists of two walls, a seat and sides. It is also recommended to make the bottom of the box. Metal corners should be used as fasteners.The structure can be varnished. And in order to make it comfortable to sit, additionally place soft pillows.

Features of a DIY wooden garden bench

It's easy to make a bench out of wood with armrests. To do this, you will need special beams for supports, boards for the back and seat, glue, saw, dowels, and a milling machine.First, a drawing of a wooden bench with a back is made. Then the templates are cut out according to the diagrams. Contours are placed on all workpieces, and why are the parts cut out with a saw? The cuts must be polished. Holes are made in the slats for the backrest. First, they need to be filled with glue, and then the dowels must be inserted into the supporting beam. The planks are fixed with dowels. Then the bench is covered with a special varnish composition.

Secrets of constructing a country bench with your own hands from a log

A practical solution is a garden bench made of logs. To make a seat, the tree trunk is sawn into two parts. The back can be constructed from a trunk that is thinner than the seating element. Legs can be made from leftover logs. Connections are made using metal pins. Here's how it's done:

• holes are made in the parts for pins;
• the pin is driven into the middle of the length;
• The second part is placed on top of the free edge and is also hammered in.

The fastener is installed using a hammer. The pins provide a strong connection to enhance fixation. The surface of the structure must be sanded.

How to make garden benches with a backrest in ethno style with your own hands

A bench in a rustic and ethno style will fit perfectly into the decor of the yard. With its help you can create a magnificent natural corner. To build such structures, wood with or without bark is used. When making benches, you can use a variety of curved shapes. Before construction, all parts must be sanded and processed.To create a seat is used unedged board. All design details have rounded shapes.

Ethnic style benches go perfectly with wicker fences. In this case, you can build the back in the form of weaving. The branches should be placed tightly. But you need to leave gaps between them. To create furniture in an ethno style, materials such as stone, wood, bamboo or even rattan are suitable.

Here are some popular options design:

• for the Moroccan style, you can use carved parts;

• for landscape design in chinese style bamboo benches are suitable;

• small furniture is used in Japanese style;

• furniture in British style involves the use of solid wood species, as well as intricate patterns.

DIY drawings of benches for a summer residence: photos and diagrams

When performing a bench, individual needs are taken into account, as well as certain parameters. To create a high-quality design, you will need a drawing with all dimensions.An important point is the calculation of the amount of materials, which will depend on the final design parameters.

Profiled timber is particularly convenient. To round the edges, you can use a special cutter.

DIY garden bench with backrest drawings: double designs

Benches can have different capacities. Most often they are designed for 2-4 people. For a double structure you will need bars and boards. It will take no more than one day to build such a product. Before cutting, you need to select the correct drawings.

Do-it-yourself bench for a summer cottage made of wood: how to make it step by step

First of all, boards for sitting are prepared. In this case, the material is cut and processed. A grinding machine or router will help in this matter. You can also use sandpaper, but it will take much more time. Using bars you can build strong legs. The areas where fasteners will be placed must be marked.

Metal pins are used as fastening elements. For greater strength, you can use special glue. Pins are also used to securely fasten the backrest. After marking, you need to measure the distances from the edge.

• The assembly goes like this:
• the bars are placed on top of each other;
• all parts are secured with clamps;
• holes are made in the center and along the edges;

Through the holes made, the parts are fixed with pins. How to do simple design

look at the video:

The seat boards are then secured to the legs using nails. After this, the nail heads can be masked with a mixture of mastic and sawdust. Be sure to cover the surface with paint or varnish.

Do-it-yourself garden bench from scrap materials: from pallets You can make a bench from pallets with your own hands. Photo interesting options you can look on our website. Such furniture can be placed not only in the garden, but also in country house

or on the veranda. For installation work you will need three pallets.

• This is how the assembly works:
• the pallet is divided into two halves. These halves will be used for the back;
• two pallets are connected together using nails;
• then the back is attached to them;

For your information! A mattress of suitable dimensions is placed on top.

Soft objects can be secured using straps.

DIY drawings of a garden bench with a wooden back: transformable option

The transforming structure is independently constructed. For this you will need boards and bars.

Technology for making a transforming bench with your own hands

You can build the structure by performing the following steps:

• 3 boards are attached to the supporting part, from which the seat will be made. You need to insert 4 screws into each board;
• when assembling units, it is necessary to apply wood glue to these areas;
• the legs to support the backrest must be sawed off from the end side. Then the legs need to be connected in pairs;
• then you need to make a backrest, which, when transformed, will turn into a tabletop.
• the boards are fastened so that there is a gap;
• 3 holes with a diameter of 0.8 cm must be made in the support board.

Here is a convenient transformer design:

To create the axis of rotation, you need to make two holes on the back leg. The backrest is secured to the base using bolts.

Article

One of the attributes of a garden or recreation area on suburban area– a bench, sitting on which you can read a book alone or, conversely, spend a few fun hours with friends. How to make an ordinary bench comfortable and at the same time turn into an element garden decor? The solution is simple - a DIY bench for your dacha. Only your own exclusive creation will fully satisfy your personal aesthetic needs.

Before you start sketching or drawing a product, you need to think about where it will be installed. The material of manufacture also depends on this. For example, it looks good in an old garden with large branchy trees. wooden bench in a forged frame (as an option - a product made of logs on a stone base), and in a young garden - a light, even openwork bench in a romantic style.

Small bench white stands out in contrast against the dark green hedge

If placed in a quiet, secluded corner, near or surrounded blooming flower beds, it will become a wonderful place of solitude and relaxation, where you can spend a few pleasant minutes alone with yourself after a hard “warm-up” in the garden beds.

Old Brick wall, a bench made of grayed wood and flowers look mysterious and romantic

Often benches are an integral part of verandas, gazebos, and summer picnic areas. In this case, there should be several products designed in the same style. One example is a garden table with two benches on the sides, where on a summer evening you can have a family tea party or play board games.

Deliberately rough and comfortable wooden structure- a table, two benches and an armchair

It is better to install the bench in such a way that it offers a view not of the neighbor’s fence or garage, but of a pond, flower garden, or. The surrounding picture should please the eye, and not remind you that you need to refuel your car or renew the paint on the gazebo. It is also appropriate to place benches on the playground, by the pool, near the front entrance to the house.

A bench by the pond surrounded by flowers and greenery is a great place for relaxation and reflection.

One of good places- in the garden, near the beds. It is better if the bench stands in the shade, for example, under the spreading crown of a tree or under a canopy, since it is intended for resting from physical labor– digging, weeding, watering or harvesting.

Relaxing in the shade flowering bush- real pleasure

You can think about a decorative frame: a garden bench made by yourself looks good surrounded by low flowering bushes, specially arranged flower beds, on a small hill or on a platform made of natural stone or .

Preparatory work is half the battle

First you need to take a piece of paper and make a sketch or drawing of the proposed product. Even at this stage, questions may arise: what is the optimal height or how many legs should the bench have? Exist general standards which should be followed when drawing up the diagram:

• 400 mm - 500 mm - seat height;
• 500 mm – 550 mm – seat width;
• 350 mm – 500 mm – back height.

If you plan to create a product with a backrest, you should determine for yourself how the backrest will be attached to the seat. Depending on whether the bench is portable or not, the legs are planned: for a non-portable product, they are firmly fixed in the ground.

It’s easy to fix the legs of the bench: you need to dig holes the right size and fill them out cement mortar, lowering wooden parts there

From the drawing you can estimate how much material is needed for the job. Usually, a product of this kind requires a minimum of financial investments: at the dacha there is always a lot of wooden blanks left over from the construction of a house or bathhouse, fasteners (screws, nails, bolts, staples), paint and varnish compositions for wood processing.

If you collect the remains of wooden products and blanks from around the dacha, you can come up with an unusual model

Found in the back room and necessary tool. If the main material for production is wood, you should prepare: a plane, a saw, a jigsaw, a hammer, sandpaper, tape measure and pencil.

Making Benches: Six Easy Projects

You can never go wrong by choosing wood for work - a material that is soft, pliable in processing and at the same time durable, capable of serving for decades. You can create elements from wood various shapes and size, figured inserts, voluminous and miniature details.

Project No. 1 – a simple bench with a backrest

If you have difficulty drawing up a sketch, you can use a ready-made drawing of a garden bench.

All parts are cut according to the dimensions in the drawing

This bench is traditional for city parks; similar examples can be found at river stations, near theaters or shopping centers - in those places where you have to spend some time waiting. The advantage of this option is the ease of preparation of parts and speed of assembly. To work, you will need thick beams for support (3 large and 3 smaller), bars or boards for the seat and back.

The color of the parts can be changed using impregnation or varnish of a darker shade

This model is portable - it can always be rearranged to another, more comfortable spot. To ensure that it always stands level and does not wobble, when installing supports it is necessary to ensure the exact location of the parts - even a slight discrepancy will cause the product to skew.

At the end of the work - and this applies to any wood product located outdoors - all wooden parts must be treated with a special anti-mold impregnation or coated with varnish, which also contains protective components. Treated wood is resistant to moisture, lasts longer and looks like new for a long time.

Project No. 2 – classic style bench

This option is more thorough than the previous one. A bench with a rectangular seat and the same back looks great against the background of a house built from any material - wood, brick, stone.

Assembly diagram of the armrests and backrest of a bench in a classic style

For variety, you can change the color, choose a shade closer country houses. The back of such a bench is a real find for those who like to imagine and translate their ideas into wood. Straight vertical bars can be replaced with slats arranged crosswise.

Several people can easily fit on this bench

The upper horizontal crossbar would look good if covered with elegant carvings or colored designs. Armrests and legs can also be figured - but it all depends on the desire and skill of the master. It only takes a few evenings to make such a bench for your dacha, but you can enjoy relaxing on it for more than one year.

Project No. 3 – table with benches

A garden set for relaxing with the whole family consists of a comfortable table and two fixed benches.

A convenient and practical table with a couple of benches will be useful in any country house

All large parts (table, benches) are assembled separately, and then assembled into a single whole using 4 lower bars - 2 on each side.

Assembly diagram of the entire kit

The table is a tabletop with legs mounted crosswise.

Table assembly diagram

The benches are assembled easily, from bars or boards of various lengths.

Bench assembly diagram

On last stage First, the benches are fixed - to give the structure stability, then - the table, exactly in the middle. here.

Project No. 5 - video master class

Variety of materials, shapes and styles

Wood is a traditional, “warm” material for making benches, which is why products made from it are so different. Instead of machine-processed bars, you can take natural material with natural shapes - and before us is not just a bench, but a real masterpiece.

The original bench is made from large pieces of sawn and processed logs

It turns out that there are also stone benches, but they are valued not for functionality, but for aesthetics. You only want to sit on a stone piece in the warm season, but you can admire it all the time.

A small stone bench fits harmoniously into the floral landscape

They look refined and elegant, but only a professional blacksmith can create a garden bench with his own hands from metal.

A wrought-iron bench among the riotous colors looks more than appropriate

Combined benches and benches, built of stone and wood or decorated with textile items - capes, pillows, look interesting.

Small pillows in pink and white, neatly laid out on a bench, make the garden corner cozy and homey.

That's all for today. We hope you found something useful. If you have questions or suggestions, you are welcome to comment.