Sintepon or holofiber - which is better? Positive properties of padding polyester. Natural fur or synthetic

Sintepon or holofiber? Which filling will warm you up better? cold winter? Which one will serve the owner for more than one season and will survive several washes, and which one will only bring disappointment and become a waste? To understand this issue, consider the types synthetic fillers, their main characteristics and advantages.

The material is synthetic non-woven batting. Fibers from polyester raw materials are twisted into spirals and connected to each other in various ways.

Fabric made using polyvinyl acetate(popularly known as PVA glue) for gluing particles together, looks lush and warm. But it is less durable and environmentally friendly. The adhesive composition is gradually washed off from the filler during washing, and the panel itself loses its shape, tears and rolls off.

Fabrics fastened with needles or heat treatment are more environmentally friendly and durable. This material holds its shape better, does not pill after washing, and is safer for consumer health.

Conscientious manufacturers make fabric only from primary raw materials. This filler is not harmful to the human body, and has higher performance properties. Products made from recycled materials are of poorer quality and may release toxic substances. It is quite simple to distinguish high-quality synthetic batting: it is elastic in structure, dull and dense, and white in color.

Recycled material has a brown or greenish tint, a loose structure, and may have bad smell. This type of batting should not be used for sewing outerwear, toys or bedding, as it is hazardous to health.

At its core, this insulation is a type of padding polyester. During production, polyester fibers are processed at high temperatures. The particles melt and stick together, forming an airy elastic mass.

The more air in the filler, the warmer it is, which is why this synthetic fabric is different high level thermal insulation. The strong weave prevents convection, so the heated air is retained as an air gap. The polyester fibers in holofiber have a hollow structure, so the air gap reaches up to 90% of the volume. Not every expensive material can compete with it in its ability to retain heat.

The fabric does not absorb moisture and does not absorb odors and does not cause allergies. Mites, bacteria and fungus also avoid it, because the synthetic base of the material is not food for them.

Filler is different high quality and durability. Withstands many washes, does not wrinkle or pill. With a low weight, products with holofiber are able to keep you warm even in severe frosts - to minus 30-40 °C.

What do these materials have in common?

Holofiber is one of the varieties of padding polyester. Both materials are non-woven, composed of polyester, and have a spiral shape of fibers. Weightless and fluffy, they perfectly retain their shape and warmth.

Used as fillers for outerwear, bedding, and toys. They also found their niche in construction - as an insulating material for walls.

Synthetic batting fabrics, regardless of the production method, have low hygroscopicity, due to which they increase the heat-protective properties of clothing. They are also not afraid of fungi and bacteria, do not absorb odors, and hold dust particles on the surface without allowing it to enter their structure.

At relatively budget cost, synthetic fillers are not much inferior in their characteristics to natural ones.

Differences between padding polyester and holofiber

Despite their strong external similarity, synthetic batting fabrics of these types also have significant differences:

1. Manufacturing technology– in the production of holofiber, adhesive bases are not used; the technology of high-temperature adhesion of fabric fibers is used.
2. Safety– some types of padding polyester can release toxic substances, unlike their competitor.
3. Qualitative indicators– significantly lower for synthetic winterizer. It wrinkles and rolls up faster after washing, and becomes deformed when using the product.
4. Allergenicity– the glue in padding polyester made by gluing can cause allergies. Allergenic chemicals are not used in the production of holofiber.
5. Breathability– holofiber contains much more air cavities in its structure, due to which it provides a large layer of warm air inside itself.
6. Thermal insulation- twice as low as padding polyester. It can withstand temperatures down to -15°C, while its competitor is down to -30°C.
7. Price– both materials are considered budget option, however, the cost of holofiber is about one and a half times higher than its progenitor.

What is better and in what cases

• Models with such insulation are quite suitable for outerwear for the spring-autumn season, as its temperature range reaches -15°C. It would also be advisable to purchase such a jacket if the color or purpose of the clothing does not require frequent washing, which will save money cash. It is more suitable for regions with mild winters than for harsh climates.
• It is used to insulate walls and roofs, since its thermal conductivity is approximately at the level of ecowool, and is also used as a soundproofing building material. Its price allows you to save money, which is important in conditions of expensive construction.

• If the outerwear is used in harsh and cold winter, preferably models insulated with such batting. At very lightweight such a product will provide excellent protection from frost and humidity.
• When buying outerwear for babies, this filling is definitely better, because it is hypoallergenic, lightweight, and perfectly protects from the cold. It also works well as a stuffing for children's toys, as it does not release toxins and does not cause allergies.
• This insulation is chosen for sports outerwear, since the weight of such clothing is much less, with high thermal insulation rates.
• For bedding, its use is more appropriate, since the filler does not accumulate static electricity and will not cause health problems.

Although natural fillers are in constant demand, not every person is ready to completely switch to using them only. This applies to fur coats leather jackets, down jackets. Some people simply can’t afford it, others don’t like the fact that animals were killed to create clothes. At the same time, the question “what to wear in winter?” needs to be decided every year. For these purposes, the chemical industry produces a large number of different synthetic insulation materials, which are designed to protect people from the cold, although there are other areas of application. One of these new materials is holofiber, which already has a good reputation among buyers.

It must be said right away that this material is often called holofiber, but this word is correctly spelled “holofiber”.

The best heat insulator is air. Both builders and clothing companies remember this rule. Therefore, when creating insulation materials, it is important to create a material whose fibers will retain air. Hollofaber is just such a filler. It is a hollow fiber twisted into a spiral. The great advantage of this material is that during production the fibers are not glued together, but soldered. As a result, the use of substances harmful to human health is reduced to a minimum.

In addition, holofiber thanks to its structure, very durable. It doesn't get spoiled because of things like that physical activity, such as squeezing, washing and the like.

Holofiber comes in three types:

1. Balloons;
2. Layers;
3. Rolls.

Externally, this filler resembles synthetic fluff. But its structure is not uniform, but consists of small lumps. This is very good insulation, clothes from which can easily withstand 25-degree frosts. In some ways it is similar to widespread artificial fillers, which is why it is often called siliconized padding polyester. A variation of this material is isosoft; it is more expensive and more difficult to produce.

If during production the material was processed in a heat chamber, then a new, more advanced type of filler is obtained - thermofiber. It not only keeps you warm, but also does not deform at all after washing. Another improved option source material- hollophane (or holophan), which represents the lung non-woven fabric, suitable for tailoring.

In addition, there are several categories of holofiber, which differ from each other in density:

1. Software Available in rolls and used for sewing outerwear.
2. Volumetric. Volume filler. More suitable for stuffing children's toys.
3. Medium and Hard, which are intended for production upholstered furniture.
4. Build, Agro and so on. Some types of material are used in the space and aviation industries, as well as in arranging ventilation.

Holofiber density ranges from 60 to 4000 grams per square meter canvas. The insulation used to sew jackets weighs about 300 grams per unit area.

Application area

Holofiber has a wide range of applications. This is due to the fact that the material is completely non-toxic and hypoallergenic. , while it provides excellent thermal insulation. Products containing this filler can be used by both adults and children.

There are several areas of use of this filler:

Advantages and disadvantages

Holofiber has its advantages and disadvantages. Among its poles are:

In many respects, holofiber can be compared with cotton. However, this synthetic material, compared to natural material, is resistant to deformation, does not clump, and does not wear out.

The material has practically no disadvantages, although there are some restrictions on care. So, if you wash an item filled with holofiber often and in too much hot water, the fiber structure may collapse.

Material care

When purchasing a product in the production of which holofiber was used, you should carefully read the care recommendations that the manufacturer usually leaves. This applies to both clothing and bedding.

Products with holofiber are usually have a shell, be it a blanket or toys, so both the filling and the fabric that covers it are washed away.

The item can be washed in a machine, but there are some restrictions. The water temperature should not exceed 40 degrees. It is better to use the delicate wash mode. The product will not deteriorate, the filler will remain intact, which, in fact, attracts many. Automatic drying can also be used. When ironing, be careful; the iron should not be too hot.

Because the washing powder may remain in the fibers, it is better to use liquid products. If they are not there, then you can use regular shampoo for washing. It is better to dry things vertically. Ideal place For this purpose, a balcony or street. Then they will dry quickly and the smell of chemicals will disappear from them.

If, after all, such products as bed dress, elements of upholstered furniture or toys turned out to be dented, then it is quite possible to restore the integrity and softness of holofiber . To do this, you need to rip the fabric along the seam., take out the filler and fluff it well with a brush.

Comparison with padding polyester and other fillers

Holofiber is only one type large family synthetic fillers. There are many other materials that may differ from it in some characteristics. However, what they all have in common is that the basis for their production is thermohollow polyester fibers. Because of this, some consider them to be the same type of synthetic.

Among the insulation materials we can mention:

1. Thinsulate;
2. Comfortel;
3. Holophile and the like.

Thinsulate has the best thermal insulation properties. Clothing with them is thinner, but it absorbs moisture well. However, it is more expensive. In addition, when buying children's clothing, parents sometimes focus on the thickness of the product and how it looks, so they may not choose Thinsulate.

Comforel is cheaper, however, it has a shorter service life. Available in balls. Used to fill pillows, blankets, toys, furniture.

Sintepuh has properties similar to holofiber. It is made from polyester. Consists of fibers coated with silicone and glued together. Synthetic fluff is not as durable and dense as the described filling, but it is well suited for sewing clothes or making furniture.

Worth paying Special attention for the most common insulation winter clothes in our country - synthetic winterizer. It has been used for decades to sew coats, jackets, hats, and trousers. Despite critical reviews, this filler does not lose its position due to its low price and ease of use. People are so used to it that they cannot immediately understand what is warmer: padding polyester or holofiber, what is the difference between them, how to tell the difference.

An important difference between padding polyester and holofiber is that its production uses glue and recycled materials, so such insulation can pose a health hazard. Synthetic winterizer protects much worse from the cold, it is airtight, its service life is short. This filler is not elastic and resilient enough. Small manipulations with clothing are enough to leave a tear in the fabric. And this will immediately reduce the degree of thermal insulation. Therefore, the answer to the question “Which is better: padding polyester or holofiber?” - very simple. Holofiber is better than padding polyester in everything, but the latter is cheaper, so it will be in demand on the market for a long time.

When buying outerwear or bedding, you may encounter the fact that manufacturers use for the filling not the usual synthetic padding polyester, but some other newfangled material, say, high-tech holofiber. What should you give preference to and what is the difference between padding polyester and holofiber? Let's try to figure it out.

Definition

Holofiber– non-woven material made of pure polyester, produced by thermal bonding.

Sintepon– a non-woven material used as filler and insulation in the production of many products.

Comparison

Both holofiber and synthetic winterizer are synthetic materials. But holofiber appeared later than padding polyester, and the technology for its production is different. To produce padding polyester, ordinary polyester fiber is used, but holofiber consists of hollow (hollow) fibers that are twisted like small springs. Synthetic winterizer is made by adhesive (an outdated, but still used method) and thermal method.

Sintepon is often made from recycled waste, which does not have the best effect on its environmental characteristics. In the production of padding polyester, glue (PVA emulsion) is often used to hold fibers together, which is why the material can quickly collapse (especially when wet). Often the synthetic winterizer does not withstand even several washes. When compressed, such a material is greatly deformed and “caked.” Due to unreliable fastening, the fibers of the material can “migrate” (move) in the product during its operation.

Holofiber is distinguished by the fact that it always returns to its original shape, very quickly recovering from crushing and compression. The material withstands numerous washes well without changing its properties. When producing holofiber, only high temperatures, no chemical or adhesive emulsions are used. Therefore, it is safe and recommended as a filler for children's things (cot bumpers, blankets, outerwear). The glue in padding polyester can cause allergies, holofiber is an anti-allergenic, hygienic material. Holofiber fibers are not subject to “migration”.

Synthetic winterizer has average thermal insulation properties. Outerwear with padding polyester is only suitable for very mild winters. For harsh climates, synthetic winterizer is unacceptable. But holofiber has excellent thermal insulation (close to natural down) and is well suited for cold weather. Reliably retaining heat, it allows the skin to breathe. Sintepon is less breathable.

Conclusions website

1. Sintepon appeared on the market before holofiber.
2. The service life of padding polyester is shorter than that of holofiber.
3. Holofiber is somewhat more expensive than padding polyester.
4. Holofiber, unlike padding polyester, quickly restores its original shape.
5. The structure of synthetic fibers is disrupted over time, which contributes to the loss of quality and “caking” of the material. Holofiber is wear-resistant and not subject to deformation.
6. Holofiber is more environmentally friendly than synthetic padding (no glue is used in production).
7. Holofiber has better thermal insulation and breathability than synthetic padding.

Among the many modern materials There are real universals that can be used in almost all areas of our lives. One of these unique products is holofiber, a development by Russian scientists that is increasingly squeezing out analogues from the market. What it is ?

Holofiber is a type of synthetic nonwoven materials and a registered trademark. In composition, it is a fabric made of hollow, spiral-shaped fibers that form a large number of air cavities (pores).

Description

The fibers in the canvas are arranged vertically or randomly. The material is porous, homogeneous over the entire surface, its density and thickness varies over a wide range (60 – 4000 g/m²).

Holofiber is produced from a chemical polyester compound using the thermal bonding method. Pre-processed raw materials are passed through wind tunnel, resulting in the formation of a layerless canvas. Under the influence of high temperatures, the fibers are soldered together, which is more reliable than gluing; holofiber is strong, elastic and has impressive properties.

• Lasting– welded fibers are very difficult to break, they are structurally connected and do not have weak point.
• Eco-friendly– the glueless production method allows minimizing the content of aggressive chemical compounds in the material; it does not emit harmful substances, does not cause irritation.
• Biostable– does not rot, does not decompose, is not affected by fungus, mold and other microorganisms.
• Warm- thanks to a large number air contained between the fibers, holofiber has low thermal conductivity, it retains heat well.
• Breathable– conducts air perfectly without creating greenhouse effect.
• Elastic– holds any given shape well, does not roll, does not get knocked down.
• Soundproofing– the air between the fibers absorbs sound waves.
• Wear-resistant- not afraid active use, repeated washing, thermal exposure.
• Incombustible– when ignited, it melts without increasing the area of ​​the fire.
• Unpretentious– easy to wash, dries quickly.
• Accessible– cheap raw materials and production method make it possible to obtain a material that is significantly inferior in cost to analogues.

The smooth surface of the fibers does not allow dust particles to accumulate, due to which holofiber is considered hypoallergenic - even people prone to allergy attacks will not worsen their condition from contact with the material.

Holofiber is 100% synthetic - polyester or polyester, which is the same. The fibers obtained from it are used in many fabrics, and the unique properties of holofiber are explained technological process. The absence of formaldehyde and other common reagents makes non-woven polyester fabric as close as possible to natural materials on environmental friendliness and safety. At the same time, all positive specifications synthetics - strength, durability, versatility.

The video describes the unique properties and range of holofiber:

Nonwoven materials under the Holofiber brand are produced by the only domestic plant in Moscow, Termopol. Although the canvas has analogues both here and abroad, they are significantly inferior to it in terms of basic parameters. Having a lot of advantages, holofiber has found very wide application:

• In construction– as a heat-insulating and sound-proofing material, as a filler in various filters.
• In the clothing industry– as insulation in outerwear for adults and children.
• At home– as a filler for pillows, blankets, mattresses, furniture, toys, covers, etc. Read about which pillow filler is the best.

In addition, the canvas is used in space development, aviation, mechanical engineering and many other industries.

On the video - myths about holofiber:

Care instructions: wash correctly

How to wash pillows, blankets and other products? Holofiber is a durable and wear-resistant material that is not afraid of mechanical stress and high temperatures. Thermal bonding of fibers allows the fabric to hold its shape and maintain volume. They will withstand even an intensive washing cycle, if this is acceptable for fabrics combined with insulation.

You should not abuse the possibilities when the top is not very dirty, it is better to wash it on a delicate cycle, but a very dirty item can be spun in hot water at good speed. Even bleach is not prohibited when the case allows it.

Kinds

One of the main advantages of holofiber is its versatility. They release it from various materials, differing in parameters and purpose.

Advantages of holofiber over other materials

This material became widespread in 2005 and since then has successfully competed with similar insulation and fillers. To understand the reasons for the popularity of holofiber, it is worth comparing it with other non-woven materials and trying to understand which is better.

• Sintepon– synthetic polyester, produced by felting, gluing, thermal bonding or needlepunching. It is mainly used as insulation for clothing and filler for household items (pillows, blankets, toys). Unlike holofiber, it is not intended for industrial use, not suitable for construction industry. Synthetic winterizer is heavier, not as dense and durable, it quickly loses its shape and gets confused, even if it is carefully quilted. The structure of padding polyester is thinner, it has high thermal conductivity, and is cooler. Holofiber beats its predecessor in all respects; it is truly better.
• Sintepooh– a polyester derivative, spiral-shaped fibers are treated with silicone and joined together. The result is voluminous, elastic and soft material, whose characteristics resemble holofiber. It is used as insulation for clothing and filler for furniture and household items. Despite the similarity, it is inferior to holofiber in strength and density, which is why it is not used as a construction insulator and in industry. It is difficult to unambiguously determine the best among these two materials; they have almost equal capabilities, but due to its versatility, holofiber is still preferable.
• Pooh- this is not even a material, but a natural insulation, which is a type of feather cover. Down has practically no core; it consists of tiny soft fibers that retain air well and repel water. Down is an excellent insulation material, but it tends to fall off when washed, which worsens its properties. In addition, it accumulates dust and can cause allergies, and also creates a favorable environment for microorganisms. Used to insulate clothes and stuff pillows, blankets and feather beds. Being warmer than holofiber, down is inferior in performance characteristics, requires special care and will last less. In the case of down, naturalness is rather harmful; holofiber definitely wins over this traditional insulation.
• Comfortel– synthetic polyester fibers produced in the form of tiny granules. Used as a filler for pillows, blankets, toys and upholstered furniture. The characteristics duplicate one of the varieties of holofiber - balls. Not inferior in characteristics, but inferior in scope of application.
• Bamboo – natural fiber, obtained from plant materials, a type of cellulose. Depending on the production cycle, a thread-like fiber is obtained for making fabric or a non-woven material used as filler or insulation. It is inferior to holofiber in terms of strength and other data and is most often used as an additive, successfully complementing synthetics. You can read reviews about bamboo fiber.
• - the thinnest and lightest of synthetic insulation, consisting of the smallest fibers. With minimal density and thickness, it is much warmer than other materials. This is a universal insulation material that is superior to holofiber in all characteristics. However, due to its high cost, it is not used as a filler, and it is not common in construction, so which material is better depends on the specific application.

Among the many materials presented today there are universal ones, i.e. those that have found wide application in various areas of human activity. One of them is the development of Russian scientists - holofiber. It became widespread in 2005, and since then has been successfully pushing its analogues out of the market. The popularity of the material is due to its availability, durability and impressive range of properties.

What is holofiber

This synthetic material belongs to the category of non-woven fabrics. The structure consists of spiral-shaped hollow fibers that form many air pores (cavities). Due to this porosity, holofiber (translated from English as “hollow fiber”) is widely used as a heat and sound insulating material in various industries. Holofiber looks like fluff or cotton, but it performs better.

Compared to its natural competitors, holofiber does not bunch up, and during use it does not form textile lumps. The fibers in the canvas are arranged either vertically or randomly. The material is homogeneous over the entire surface. Thickness and density vary from 60 to 4000 g/m2. The material is produced from a polyester compound through thermal bonding.

Distinctive features

One of the main distinctive features The material is a porous, multilayer structure that is capable of trapping dust. Presence of pores different sizes fills the fiber with air, due to which it is used to organize a protective sound and heat insulation layer. The fibers have a spring structure, due to which the products easily restore their shape.

Holofiber is 100% synthetic: polyester or polyester, which is generally the same. Unique properties The fibers obtained from it are explained by the technological production process. The composition does not contain formaldehyde and other common reagents, thanks to which the polyester fabric is as close as possible to natural materials in terms of safety and environmental friendliness. All positive technical properties(versatility, durability, strength) of synthetics is preserved.

What is the difference between padding polyester and holofiber

Manufacturers and consumers often have the question, which is better, padding polyester or holofiber? Compared to padding polyester, raw materials pre-processed for the production of holofiber are passed through a wind tunnel, resulting in the formation of a layerless canvas. Next, under the influence of temperature, the fibers are soldered - this option is more reliable than gluing. Thanks to this, the final product is strong, elastic and has a whole range of important properties.

As for synthetic padding, it is also synthetic polyester, but it is made by gluing, felting, thermal bonding or needlepunching. It is used as insulation for clothing and filler for household items, for example, blankets, pillows, toys (including those with magnets). Holofiber, in comparison, is intended for industrial use and is ideal for the construction industry, which cannot be said about padding polyester.

In addition, synthetic winterizer is heavier, but less dense and durable. It quickly loses its shape and begins to bunch up, even if it is carefully quilted. The structure of padding polyester is thinner, so it has high thermal conductivity - this option is not optimal for thermal insulation. When the name of the filler, such as silicone, is indicated in the characteristics of outerwear, keep in mind that it means siliconized padding polyester. It is superior in quality to conventional padding polyester insulation, because... Due to silicone treatment, it holds its shape better. True, it can get into clumps.

Differences from fluff and synthetic fluff

Down is not a material, but a natural insulation material, which is considered a type of feather cover. It does not have a rod, it consists of soft fibers that can repel moisture and retain air. Down is an excellent insulation material, but it can fall off when washed. In addition, it tends to accumulate dust, cause allergies and create a favorable environment for microorganisms. Used for stuffing pillows, blankets, feather beds and insulating clothes. Down is warmer than polyester fiber, but inferior to it in terms of performance.

As for synthetic fluff, it is a derivative of polyester, the spiral-shaped fibers of which are treated with silicone and connected to each other. It turns out elastic, soft and bulk material, which is similar in characteristics to holofiber. It is used as insulation for outerwear and filler for upholstered furniture and household items. It is inferior in strength and density to non-woven polyester fabric, therefore it is not used in industry. Unambiguously determine best option difficult, but holofiber wins due to its versatility.

Types of holofiber

This material is not afraid of mechanical stress. Thanks to the thermal connection of the fibers, the fabric holds its shape and retains its original volume. It can withstand intensive washing, if this is acceptable for fabrics combined with insulation - you should not abuse the capabilities. Having decided to purchase it, to solve certain problems, decide on a specific type:

• Granule ball. This type of filler is produced in the form of spherical granules - the most popular type, which is widely used as a filler for blankets, pillows, products for pets, and decorative elements of upholstered furniture.
• Construction (sheet). This variety is used as insulation and sound insulator. Produced in the form of layers. It is used at the stage of construction, reconstruction, in order to improve the performance characteristics of a single room.
• Holofiber insulation. It is produced in rolls (webs), the thickness and dimensions of which depend on the manufacturer. Used as insulation for clothing.
• Formative. This variety is presented in the form of a voluminous canvas, which is designed to give shape to a variety of decorative items.
• Furniture. Canvas and filler for mattresses, upholstered furniture. It is a thick, dense and elastic material that can retain its shape well.

Qualitative characteristics of holofiber

One of the main advantages of the material is its versatility, due to which it has become so widespread. The smooth surface of the fabric fibers prevents dust particles from accumulating, making the material hypoallergenic. Even those with allergies will not worsen their condition from contact with fabric made from polyester raw materials. More details about features and benefits:

• Strength. This property is ensured due to the fact that the fibers welded together are difficult to break; they do not have a weak point, because connected in a structural way.
• Environmentally friendly. This is achieved through the use of a glue-free production method, which minimizes the content of aggressive chemical compounds in the fiber. Finished products does not emit harmful substances and does not cause irritation.
• Low thermal conductivity. This was made possible due to the large amount of air contained between the fibers. Due to this, polyester fiber retains heat well.
• Breathability. The canvas perfectly conducts air without creating a greenhouse effect.
• Biological stability. The material does not rot or decompose. It is not susceptible to mold, fungi and other microorganisms.
• Wear resistance. Polyester fiber is not afraid of thermal effects, repeated washing, active use.
• Non-flammability. When ignited, the material only melts without increasing the area of ​​fire, so it is classified as non-flammable.
• Elasticity. It holds any given shape well due to its structure, does not get knocked down or roll down.
• Availability. Raw materials are relatively cheap, manufacturing process does not require large expenses, and in terms of cost, holofiber is significantly inferior to many analogues.
• Unpretentiousness. The fabric is easy to wash and dries quickly.

Material properties

Holofiber is ideal because it does not require any special care. It does not absorb foreign odors and has a high tensile strength coefficient. In the light, the structure of the material is not destroyed. Due to high wear resistance and elasticity, it is becoming increasingly popular. Due to low hygroscopicity, the material retains its plasticity even at low temperatures. Performance characteristics and properties:

Where is holofiber material used?

Possessing many advantages, this polyester fabric has found wide application, for example, in the production of workwear. The material is also optimal for making outerwear, including children's clothing. Hypoallergenic, sensitive to individual microclimate - it is very comfortable in winter time. Non-woven polyester fabric is also suitable for organizing landscape design as a hardening base.

Other applications:

• light industry;
• construction area;
• furniture manufacturing;
• mechanical engineering;
• aviation, space development, etc.

In the production of upholstered furniture, the fillers used differ in density. Some have the ability to form, while others do not:

• hard (hard) – used as a structural and flooring material for individual parts upholstered furniture;
• medium (middle) – forms upper layer;
• soft (soft) – intended for quilted elements.

In construction

Professional builders have appreciated holofiber, which is why it is actively used to fill the space between walls during the construction of various objects. In this case, it acts as a heat and sound insulating layer. Not only inter-wall fiber insulation is widely used, but also under-roof, inter-crown and acoustic options. They are produced in the form of light elastic sheets and universal sheets, which are cut extremely simply, even by hand. In addition, this non-woven material is used as a filler in filters.

In the textile industry

Non-woven fabric is widely used for the manufacture of outerwear for adults and children. In addition, the material is good as a filler for pillows, blankets, mattresses, covers, etc. It is also used to make upholstery for furniture, lining for jackets, and coats. It holds its shape perfectly, withstanding washing without loss of volume, after which you don’t need to think about restoring its shape, which cannot be said about down and feathers. An interesting alternative is thread-like fibers made from bamboo cellulose, but they are inferior to holofiber in strength.

Holofiber filling in jackets

In jackets, this non-woven material is used as a filler due to the fact that it retains heat well, is very light, and easy to care for. Compared to natural analogues, it is cheaper, but keep in mind that with frequent washing and wrong choice mode in the washing machine, the fibers will lose their original shape over time. Winter jackets with such a filler they have unique characteristics: high strength, low thermal conductivity, environmental friendliness.

At home

Canvas made of hollow spiral fibers are used for filling furniture, blankets, mattresses, toys, covers, etc. The fabrics have excellent breathability, which is one of the main requirements for flooring materials and padding in frameless furniture. The fibers are characterized by high tensile strength and resistance to repeated bending, and this affects the durability of the final product.

Holofiber care

The material is not scary mechanical impact and high temperatures (boiling, dry steam treatment), it can withstand intensive washing, but it is important to know the rules for proper care of it. Do not abuse the capabilities of the fabric: when the top is not very dirty, it is better to wash on a delicate cycle. You can use regular washing powder, and in some cases even bleach will do. General rules:

• Regardless of what item holofiber is used in (be it clothing or bedding), it can be washed either by hand or in a washing machine.
• If the product is not very dirty, it can be cleaned without a general wash. With frequent washing, non-woven fiber will begin to lose its shape and quality.
• It is better to soak heavily soiled items in a soapy solution for a while - this will make the dirt come off easier. After this procedure, rub heavy pollution sponge or soft brush, and then rinse the items, wring them out and put them in the machine for washing.
• Before washing, be sure to read the label on the item, because each product filled with holofiber has a top material, which can be natural or synthetic. It has great importance When processing a product, for example, raincoat fabric must be washed at a temperature no higher than 45 degrees, and spinning will need to be done at a minimum number of revolutions.

How to properly wash a jacket or coat

Dirty jackets made of polyester fabric, it is better to soak it in advance soapy water and, if necessary, rub the most contaminated areas. During washing, it is undesirable for holofiber to increase the water temperature to 70 degrees. This indicator should not exceed 40°C if the top of the jacket is made of membrane fabric, and you need to select a delicate washing mode. In this case, the powder cannot be used; as a last resort, use liquid dishwashing detergent or regular shampoo.

If the top of the jacket is made of bologna, then it is better to wash this product by hand. It is not recommended to strongly wrinkle the jacket or twist it after washing, because... Bologna wrinkles easily, and creases remain on its surface. Straighten the washed item without twisting it with your hands and hang it on hangers so that all the water drains from it on its own. If properly dried, a jacket or down jacket often does not require ironing, because holofiber is not prone to deformation.

Caring for pillows and duvets

When you decide to buy bedding for yourself and your child, made from a material such as hypoallergenic holofiber, read the rules for caring for them. Washing blankets with pillows is not much different from washing jackets or coats: it all depends on the degree of soiling, the type of top fabric, and the volume of the items. For example, a large blanket will have to be washed by hand, because... washing machine small for her - will need to be prepared in the bathroom soap solution.

How much does holofiber cost?

Holofiber-SOFT is widely used in sewing warm clothes, blankets, and products for children. This environmentally friendly product is non-toxic to the body and free of harmful impurities, cost:

Video