Make a bench out of wood drawings. Preparation of material for the structure

We will send the material to you by e-mail

To make your own personal plot comfortable to use and beautiful, you need to use such elements landscape design, like flower beds, paths, gazebos, etc. Garden furniture is especially important. This is what guarantees your convenience.In our review we will find out how to construct a garden bench with a backrest with your own hands. Drawings and detailed photos will allow you to make the best design.

Comfortable garden furniture is a wonderful addition to the garden ensemble

Before you make a bench for your dacha with your own hands, let's figure out what types of this design exist. Classification can be made based on factors such as material, functionality and characteristics.

Benches can be just a piece of furniture designed for sitting, or have a multi-functional purpose. For example, used as a rocking chair or table.Original benches – swings – are also popular. Designs with backs that are stationary are in demand. They are made of brick or concrete. There are also folding benches.

The following materials are most often used for the manufacture of products:

• plastic options are lightweight and resistant to all kinds of climatic changes;

• wood great solution for anyone summer cottage. This traditional version, which has many advantages;

• metal can be used in two configurations, from profile lines or as a forged structure;

• to the very durable material applies stone. For a bench, you can take two boulders, and also use purchased material.

You can even make the product from concrete. There are also combined options DIY garden benches with backrest. The drawings will help you build a structure from any material. You can combine a metal frame with wood slats. You can also combine stone and wood.

Benches can have different designs:

• a simple option - a bench without a back;
• you can also build a bench with a backrest with your own hands;
• a bench with a table is suitable as an option for the garden;
• a bench with a canopy is used as a miniature gazebo.

When creating designs in artistic style Special attention is given to appearance. Instead of side parts, all kinds of shapes can be used.

When creating drawings, it is important to consider general form products, as well as all dimensions of the structure. Furniture made of wood, forged steel or stone will fit perfectly into a garden created in a classic style. A plastic products suitable for landscape design in modern style. Where to place the bench matters. You can place it near the porch, or also place it in the back of the garden under a beautiful tree.

For your information! A bench made of wood can be used comfortably at any time of the year, since the level of thermal conductivity is lower than that of stone and metal.

Original benches for a summer house made of metal and wood

You can try making a metal or wooden bench with a backrest with your own hands. Metal products are known for their particular strength. However, they do not require constant attention. They can be coated with a special anti-corrosion compound only once a year.Modern designs using forged elements performed using a welding machine.

Wood is used to make benches with beautiful design. These products are suitable for almost anyone landscape design. To protect similar designs You can use special varnishing compounds.

This will protect the wooden surface from the development of mold, fungi, as well as sun rays. Rarely does anyone use it completely hardware, since they cool down greatly in the cold season and heat up in the heat. Most often from of this material

load-bearing elements and legs are made, and the back and seat are made of wood. From profile pipe Rectangles are made, and then jumpers are welded to the side walls for support. You can build more functional design

with armrests, soft pillows and backrest.Benches made from boards are popular. The design can be made in the form of a sofa, and pillows can be placed on top.

You can also build a simple bench with your own hands from wood. In this case, the legs can be in the shape of the letter X. From the boards you can make a bench in the shape of the letter P. In this case, it is necessary to ensure rigid fixation of the seat and legs.

For your information! The use of special coating compositions will allow for a long time preserve the natural pattern of such materials.

Photos of do-it-yourself stone benches

You can make a garden bench with a backrest from stone with your own hands. This material has high performance properties and significant strength. Stone structures Can be used for any garden style and design. Use of stone elements to complement general design. Such furniture looks good against the background of a building with individual parts made of stone.A stone bench will make a wonderful combination with stone flower beds, steps, ponds and paths. Such benches are often combined with wood.

For your information! Marble is often used to build such benches. Sometimes quartzite and even coarse granite are used.

Photos of garden benches with your own hands: how to make them from scrap materials

Plastic products also have certain advantages. Here they are:

• low weight of the structure, which ensures its lightness;
• affordable price;
• a wide variety of colors;
• practicality.

You can use all kinds combination combinations, which will differ or be combined in texture, color palette and materials. A good solution is the combination of stone and wooden parts.

Try to make original combined designs. This can be a sandbox bench for children, as well as a flowerbed bench.

How to make garden benches with your own hands: popular technologies and ideas

To make a bench with a wooden backrest with your own hands, you first need to understand its design. A simple device involves sitting on some supports. But there are also products that have a non-standard configuration, designs with forged or carved parts, as well as furniture with armrests.

A simple solution is to use two boxes and a couple of boards. In this case, the boxes will be installed as supporting elements. They can be filled with soil and made into them beautiful flower bed. A seat is assembled from boards, which is installed between the drawers. Be sure to sand the surface using sandpaper. For a more practical design, you can replace the boxes with stone or concrete pedestals. Seats can be made from halves of logs or from treated boards. The seat must be secured using metal corners. Dowels are used to attach them to concrete bases. And fixation to wood can be done using self-tapping screws and through bolts.

Image	Stages of work
	Will need detailed drawing with all sizes
	The workpieces must be polished. The rear legs also provide support for the back. All blanks are pre-marked.
	At a height of 40 cm, mark a place to fix the seat. Then the board is cut at an angle of 20 degrees. The front and rear legs are attached using timber.
	The side parts are attached using seat boards. They are screwed in with self-tapping screws. To secure the structure, you need to tie it using a beam. Two boards are attached for the back.
	Finally, a special coating is applied to protect against precipitation.

Helpful information! Flowerpots with decorative bushes and dwarf trees can be used as supports.

Bench with storage box

You can build a convenient design with storage boxes. In this case it is worth using old furniture. Before work you need to select correct screws. Their thickness should correspond to the thickness of the wooden elements.

A bench with a drawer is a wonderful solution for a loggia and balcony. In this case, you can use the old balcony. The design with a drawer consists of two walls, a seat and sides. It is also recommended to make the bottom of the box. Metal corners should be used as fasteners.The structure can be varnished. And in order to make it comfortable to sit, additionally position soft pillows.

Features of a DIY wooden garden bench

It's easy to make a bench out of wood with armrests. To do this, you will need special beams for supports, boards for the back and seat, glue, saw, dowels, and a milling machine.First, a drawing of a wooden bench with a back is made. Then the templates are cut out according to the diagrams. Contours are placed on all workpieces, and why are the parts cut out with a saw? The cuts must be polished. Holes are made in the slats for the backrest. First, they need to be filled with glue, and then the dowels must be inserted into the supporting beam. The planks are fixed with dowels. Then the bench is covered with a special varnish composition.

Secrets of constructing a country bench with your own hands from a log

A practical solution is a garden bench made of logs. To make a seat, the tree trunk is sawn into two parts. The back can be constructed from a trunk that is thinner than the seating element. Legs can be made from leftover logs. Connections are made using metal pins. Here's how it's done:

• holes are made in the parts for pins;
• the pin is driven into the middle of the length;
• The second part is placed on top of the free edge and is also hammered in.

The fastener is installed using a hammer. The pins provide a strong connection to enhance fixation. The surface of the structure must be sanded.

How to make garden benches with a backrest in ethno style with your own hands

A bench in a rustic and ethno style will fit perfectly into the decor of the yard. With its help you can create a magnificent natural corner. To build such structures, wood with or without bark is used. When making benches, you can use a variety of curved shapes. Before construction, all parts must be sanded and processed.An unedged board is used to create the seat. All design details have rounded shapes.

Ethnic style benches go perfectly with wicker fences. In this case, you can build the back in the form of weaving. The branches should be placed tightly. But you need to leave gaps between them. To create furniture in an ethno style, materials such as stone, wood, bamboo or even rattan are suitable.

Here are some popular options design:

• For Moroccan style you can use threaded parts;

• for landscape design in chinese style bamboo benches are suitable;

• small furniture is used in Japanese style;

• furniture in British style involves the use of solid wood species, as well as intricate patterns.

DIY drawings of benches for a summer residence: photos and diagrams

When performing a bench, individual needs are taken into account, as well as certain parameters. To create a high-quality design, you will need a drawing with all dimensions.An important point is the calculation of the amount of materials, which will depend on the final design parameters.

Profiled timber is particularly convenient. To round the edges, you can use a special cutter.

Benches can have different capacities. Most often they are designed for 2-4 people. For a double structure you will need bars and boards. It will take no more than one day to build such a product. Before cutting, you need to select the correct drawings.

Do-it-yourself bench for a summer cottage made of wood: how to make it step by step

First of all, boards for sitting are prepared. In this case, the material is cut and processed. A grinding machine or router will help in this matter. You can also use sandpaper, but it will take much more time. Using bars you can build strong legs. The areas where fasteners will be placed must be marked.

Metal pins are used as fastening elements. For greater strength, you can use special glue. Pins are also used to securely fasten the backrest. After marking, you need to measure the distances from the edge.

The assembly goes like this:

• the bars are placed on top of each other;
• all parts are secured with clamps;
• holes are made in the center and along the edges;
• Through the holes made, the parts are fixed with pins.

How to make a simple design, look at the video:

The seat boards are then secured to the legs using nails. After this, the nail heads can be masked with a mixture of mastic and sawdust. Be sure to cover the surface with paint or varnish.

Do-it-yourself garden bench from scrap materials: from pallets

You can make a bench from pallets with your own hands. You can see photos of interesting options on our website. Such furniture can be placed not only in the garden, but also in country house or on the veranda. For installation work you will need three pallets.

This is how the assembly works:

• the pallet is divided into two halves. These halves will be used for the back;
• two pallets are joined together using nails;
• then the back is attached to them;
• A mattress of suitable dimensions is placed on top.

For your information! Soft objects can be secured using straps.

Video: how to make a simple bench from pallets

DIY drawings of a garden bench with a wooden back: transformable option

The transforming structure is independently constructed. For this you will need boards and bars.

Technology for making a transforming bench with your own hands

You can build the structure by performing the following steps:

• 3 boards are attached to the supporting part, from which the seat will be made. You need to insert 4 screws into each board;
• when assembling units, it is necessary to apply wood glue to these areas;
• the legs to support the backrest must be sawed off from the end side. Then the legs need to be connected in pairs;
• then you need to make a backrest, which, when transformed, will turn into a tabletop.
• the boards are fastened so that there is a gap;
• 3 holes with a diameter of 0.8 cm must be made in the support board.

Here is a convenient transformer design:

To create the axis of rotation, you need to make two holes on the back leg. The backrest is secured to the base using bolts.

Article

Benches and benches in the country house and in the garden are primarily a place of relaxation. But just putting up a bench is not interesting. After all, you can create a beautiful corner. To not just relax, but to enjoy nature and the fruits of your labor. There are many interesting ideas. Moreover, they often play out the simplest designs, such that these benches can be made with their own hands by any person whose arms grow from their shoulders.

Photos of original benches (ideas for cottages and gardens)

Everyone knows what ordinary benches look like—they’ve seen them more than once. But I don’t want the usual one - the simplest one. Especially if you have already started the process of decorating the site or are just planning it. Why not start from the bench? And then other decorations will follow. You just have to start.

In the garden or near the house I want to have more greenery: beautiful and different flowers. - that's good, but why not combine them with a bench.

What could be simpler? Two wooden boxes in which flowers are planted and between them a couple of planed and sanded boards. This bench can be placed near the wall, and a couple of long boards can be placed on the wall to create a backrest.

Not everyone likes flower beds made of wood: wood requires care, and without it it quickly loses appearance. It is especially difficult to care for a tree that is in contact with the soil. Instead of wooden boxes there may be, for example, stone or concrete pedestals.

It’s very easy to make such a bench at the dacha with your own hands. You can find ready-made concrete flower beds or do something similar. You can buy a processed board, or you can do it yourself. Instead of a board, there can be half a log - depending on the style of the site. It is easier to secure the seat using metal corner. It is attached to concrete using dowels, to wood - with self-tapping screws from below or through bolts.

If anyone has large plants in durable flowerpots, you can implement the following idea. In this option, the bench covers the plants. To avoid surprises, flowerpots must be very durable...

Eat similar option benches made of boards and without plants: may need to be placed on or in. The supports are made of boards of the same size, and the seat is made of timber.

Bench made of boards - a non-standard option

And more variations on the same theme: hollow ones are used as support building blocks. Treated bars are inserted into the holes. This is the seat of the bench. Just round the edges of the beam, or it will be uncomfortable to sit.

For this garden bench, it is advisable to find large blocks with thick walls. If not, you need to securely fasten the blocks to one another. The whole task is to first secure the blocks (for example, with pins), and then attach the bars to them (with bolts or dowels).

Log benches

If your site is decorated in a rustic or ethno style, the standard approach will not suit you. It is best to use logs in this case - with or without bark - it’s your choice.

The seat for the bench is made of logs - a trunk of large or medium diameter sawn lengthwise. The back is either a smaller diameter trunk, or simply a cut closer to the edge. The legs can also be made from narrow pieces of logs (look at the photo below).

Log bench - quick and easy

The legs and seats are connected to each other with metal pins: a hole of slightly smaller diameter is drilled in both parts for the pin. The pin is driven into one of them, the second part is pushed in and is also driven in, but this time they hit the wood rather than the pin. To avoid leaving traces, lay a piece of unnecessary board and hit it with a hammer (or sledgehammer). Such a connection should be quite reliable, but to be sure, you can install two or three pins, or you can cut a little log, making a flat area of ​​the same size on both parts being connected. By increasing the support area, you will increase the reliability of the seat fastening: after all, the log weighs a lot.

Bench option without backrest

Another interesting option in the “ethno” style is shown in the photo above. It is made in stone, but this bench can also be made from logs. The seat is a very thick board, the legs are most of the deck large diameter. A groove is cut in the deck for laying the seat. If you have a tool (you can make a cut with an axe, grinder or chainsaw), it’s easy to do.

Often in the countryside a work desk is needed. From a log you can make not only a bench, but also a table. A version of such an ensemble is shown in the photo. Only the tabletop is made of boards, all other parts are logs different diameters or from half.

A greater degree of processing is inherent in the next bench in the same style. The back, legs, armrests are made of thick and not very thick branches, the seat is made of sanded and treated (barked and sanded) non edged boards.

The other bench was made almost the same way. Only the boards and branches are located in a different direction and the result is a different look. A DIY bench of this type does not require much skill. IN in this case The more careless the work, the more decorative the result.

Wicker back - not often seen

You can make a rest area and a bench around the tree. The designs are simple, making the flooring is generally easy.

You can also supplement your recreation group. And above the bench you can put it - this is the “progenitor” of the usual arch - one of the types of light gazebo. And to make the relaxation completely complete, you can do, or.

Made of metal and wood

Few people will install a complete metal benches. They, of course, can be very beautiful, but in the summer they heat up to incredible temperatures, and when it gets a little colder, you can’t sit on them because they are too cold. Benches made of metal and wood do not have these disadvantages. Legs and load-bearing structure made of metal, and the seat and back (if any) are made of wood. Moreover, there are also interesting shops in modern design.

Rectangles are welded from the profile, jumpers are welded to the side walls, on which the seat boards rest. Simple, stylish, reliable, functional.

In a more advanced form - with armrests, a backrest, soft cushions on the seat, such a design may look like in the photo. The wide seat turns the bench into a sofa, and pillows add comfort - covered with fabric furniture foam rubber. The tables are made in the same style - a frame made of corrugated pipe and a tabletop made of boards.

One important point: if you make a seat or tabletop from several adjacent elements, they do not need to be butted end to end. There should be a gap of 3-4 mm between adjacent boards/bars. The wood swells and shrinks. In order for the surface to remain relatively flat during these processes, a gap is required.

If smoother lines are needed - for families with children - you can bend the pipes and make garden benches and a table with rounded edges. This garden furniture is completely safe. An ordinary round or corrugated pipe is bent, leaving the sides in the shape of the letter “P” with a wide back. The length of this backrest is the length of the bench. For the table, the dimensions are made a little larger: the legs and back are longer.

Make two identical blanks for the table and bench. Next, cut the boards to equal lengths. For the seat, about 40 cm, for the tabletop, at least 55 cm. They are fastened to the pipes with furniture bolts with a flat head. To prevent the caps from sticking out, drill a hole of a slightly larger diameter under them.

Benches made of boards

The largest group is benches and benches made of boards. There are designs that are more reminiscent of sofas, especially if you put soft pillows on them - and you can lie down.

Garden furniture in a modern style is easy to assemble: rectangles with partitions made of thinner boards, connected to each other.

Even conventional design a country bench can become exclusive if you approach it with imagination: instead of legs and armrests, wooden wheels. The result is a designer item.

A bench made of boards with a back and wheels instead of sides - looks interesting

And the simplest possible is a board with legs in the shape of the letter “X”. Such shops were built centuries ago, and you can still see them today.

From the boards you can make a bench in a modern style: in the shape of the letter “P”. With this design the main task- ensure rigid fixation of the legs and seat: the pushing forces are not compensated for by anything. In this case, it is important to take a thick board or timber so that it does not sag. You can place the board “on edge”: this way the rigidity will be greater. To increase reliability, you can install corners from below.

The photo shows an option with a 45° cut. Having a miter box or circular saw precise cutting easy to achieve. By accurately joining the workpieces and fastening them, we obtain an angle of 90°. If the seat does not sag, it will last a long time...

Interesting and reliable option The benches are shown in the photo below. The legs are assembled from boards different lengths: every second is shorter by the width of the seat board. Interesting idea. It is easy to make such a bench: it is important to maintain the dimensions, and everything is connected very simply: with nails into the face of the seat.

Original benches

It seems like there’s more that can be thought of... but it turns out there’s a lot. For example, attach the seat to a large stone.

Make a structure from bamboo trunks.

Or a stone.

Sitting in winter will be unpleasant, but beautiful...

How to make a bench: photo reports

We won’t make benches out of stone—not everyone has the equipment, but we can make them out of different pieces of wood. Let's talk about making simple but unusual designs. So that a handmade bench can be a source of pride.

Bench without back

The design is simple, but looks interesting due to the specific material. For the legs, timber with rounded edges was used. If you have logs small size, you can trim them on the sides. You'll get almost the same effect. THIS material is not so rare; the legs are assembled from it in an unusual way: the bars are laid flat on top of each other. This adds zest and appeal.

This bench without a back has a length of about 120 cm, a width of about 45 cm, and a height of 38 cm. You can round the edges of the beam using a cutter, or you can find a similar profiled one. It costs more, but it will be easier to work with: it is already well processed and is easy to connect.

Depending on the found cross-section of the timber, calculate the length you will need. Determine how many bars will have to be stacked on top of each other to achieve the required height. In this case, 5 bars were used for one leg. Total 45 cm * 5 pieces - 2.25 m. Two legs required 4.5 m of timber. A board 40 mm thick and 90 mm wide was used on the seat. For the seat you need 5 boards 1.5 meters long. It turned out 1.2 m * 5 pieces = 6 m.

First we cut and process the boards for the seat. Their edges must be rounded. If not grinder or a router, you will have to work sandpaper, but you can find such a board or arrange at a sawmill to have it processed for you and also sanded: much less work will. So, we cut the boards to the same length, sand them and varnish them (with or without tinting - your choice).

Place the bars for the legs one next to the other, aligning their edges. Using a square and a pencil, draw lines where the fasteners will be placed. The distance between the lines is 7-10 cm.

You can take metal pins, or you can make pins - carved from wood. Holes slightly smaller in diameter are drilled for them; the depth of the hole is half the length of the pin. Then they are hammered into one part, and a second part is inserted into the same hole on top. The connection is reliable, but to be sure, you can add glue, although then the structure will turn out to be one-piece.

With a pin connection, the main task is to make the holes strictly one above the other so that the parts mounted on the pin give a smooth edge. We've done part of the work - we've drawn lines where we'll drill, now we need to measure the same distance from the edge. For this we will create a template. We take a piece of plank about 1.5 cm wide. We will drill holes at this distance from the edge of the bars. Having placed it exactly along the edge, we mark the places of intersection with the drawn perpendicular lines.

We will install the pins in a checkerboard pattern, so we will drill holes through one intersection. Also holes on one bar with different sides We do it in a checkerboard pattern. In a similar way, using pins, the legs are connected to the seat: two pins for each plank.

Technologically, this type of connection is correct, but it is complex and requires a certain skill. It could be easier. Place all the bars one on top of the other, secure with clamps, drill through in two or three sets - in the center and along the edges, connect with a long pin, with washers placed under the head and nut. You can nail the seat strip legs to the legs assembled in this way with nails from above or try to make a pin connection.

The bench was made by hand. Finishing work remains

If you nailed the seat, take some wood mastic suitable color, add some very fine sawdust and stir. Apply this mixture to the joints. When dry, smooth it with sandpaper. Sand all parts smooth and coat with varnish or wood paints for exterior use (preferably not covering ones, but those that leave the wood texture visible).

Read how and with what you can paint wood. It talks about lining, but the painting techniques remain the same, and the compositions must be taken for external use.

DIY bench made from broken chairs

In any household you can find two old chairs. They should be the same and still strong enough. We disassemble the chairs, leaving the part with the back and legs. We connect the two backs using bars of a suitable cross-section.

For greater rigidity at the bottom, at a distance of about 20 cm from the floor, where previously the chairs also had jumpers, we make another frame with transverse crossbars. It can be used as a footstool or to store some things.

After sanding, we paint the resulting structure. This time the paint should be ordinary: different types of wood can only be painted over with covering paints. Apply with a brush or from a spray can.

All that's left to do is cut the seat to size from thick plywood (8-10 mm thick) and cover it with foam rubber and fabric.

Garden chair/bench made from pallets

Everything is useful on the farm. Even cargo pallets can be used to make garden furniture. Moreover, there is no need to disassemble them: we use one for a seat, and from the second we will make a backrest. You will only need well-processed planks for the armrests and bars for the legs.

In one of the pallets we strengthen the fastening points by inserting pieces of bars. Having inserted it, we fasten it with self-tapping screws on one side and the other.

From a timber with a cross-section of at least 100*100 mm, we cut four identical sections 80 cm long. We screw them in those places that we have just reinforced. We leave 20-25 cm on the legs. We fasten with four long screws - 150 mm and no shorter.

It is important to maintain verticality and leave the same distance on the legs. Then the seat will be level. If there are errors in height, you can try to saw it, but then you will have to cut it from above too - so that the armrests are even. So try to screw it straight. Deviations from the vertical can only be dealt with by screwing the leg back on.

We attach a second pallet to the rear posts, and boards for armrests on the sides.

All that remains is to cut from furniture foam rubber piece and cover it with fabric. You can also make pillows for the back. If you are not going to process everything thoroughly, but make a loft-style chair, use sandpaper or a sander, sanding all surfaces until smooth. You can coat it with paint, giving the wood a dark color.

Drawings of wooden benches

Video lessons

Several videos on how to make benches with your own hands.

With the onset of summer, it becomes impossible to sit in the house - you want to spend as much time as possible outside. Today we will show you three ways to make benches with your own hands.

DIY benches in half an hour

Here is an example of the simplest bench you can think of. If you have all the materials, this bench can be assembled in a matter of minutes!

All you need are eight cinder blocks with through holes, four wooden bars and construction adhesive. It is better to select the beams according to the width of the holes in the blocks, but if they are a little narrower, then this is not a problem.

Don't forget to process wooden surfaces sandpaper to avoid splinters.

The blocks and beams can be painted if desired to give the bench a more pleasing appearance.

It remains to install the blocks vertically, having previously lubricated the contacting side surfaces glue and insert the bars into the holes. Once the glue dries, the bench is ready! If you wish, you can equip it with pillows: it will be more beautiful and comfortable.

How to make your own wooden bench with a metal frame

If you have at least minimal welding skills, then here is a project that will suit you. The bench stands on two metal supports and is simple but reliable. You will need a profile pipe or a thick plate for supports and, of course, wide board for sitting.

If you are far from welding work, then you can assemble a metal frame at the corners and fasten it with metal screws.

After the bench is assembled, the metal legs should be treated with a metal primer, which will protect them from corrosion, and then the legs should be painted with metal paint for outdoor use.

The wooden seat of the bench must be painted with varnish or paint for outdoor use. This simple DIY bench option will serve you for many years.

You can experiment and create your own own design benches. For example, such a laconic designer bench is quite suitable for you because... it is done exactly according to the same principle.

How to make your own bench with a backrest

It is easy to attach a backrest to a bench standing on metal supports.

To do this, you need to take metal plates and bend them under the right angle. This is easy to do even with your hands, or you can fix the edge of the plate and bend it with a hammer. The plates will act as a support for the back. We fix the plates from below under the seat at one end, and screw the backrest to the other end.

It is better to recess the bolts on the back (and on the seat too) into the wood so that they do not create discomfort.

If you don’t want to mess around like that, you can use bolts with a round head.

A more advanced solution for the backrest is to attach it to the frame rather than to the seat. This design is certainly more reliable.

To do this, you will have to weld some parts at an angle, because it is more comfortable to sit on a bench with an inclined back. And this requires great care.

Exist special devices, allowing you to fix the parts to be welded under right angle, - they're called magnetic holders or positioners.

But there is also a “folk” method. Make a wooden block and attach the parts to it while welding. So you can cook required amount supports, precisely maintaining the same angle.

All that remains is to attach the backrest to the frame, and the bench is ready!

DIY benches from old furniture

Old unnecessary furniture can still serve us in the country. You can practically make benches from it yourself.

We don’t throw away an unnecessary crib, but make a bench out of it with our own hands. One of the headboards of the bed will be the back of the bench. The second backrest is divided into two parts: the lower part is the lower front part of the bench; top part— is divided into two parts and serves as bench handrails. The bench provides convenient drawer for storing pillows.

A wooden bench repurposed from a regular size bed. Provide in the seat small box for storing pillows, then you won’t have to carry pillows from home all the time and come up with places to store these pillows.

Running out of beds? You can make a bench with your own hands from old shelf— painted and made a pillow, that’s all the work. But this one simple bench can turn into almost a throne if you have an old unnecessary door in stock. You can use it to make a beautiful high back for a bench. By the way, old wooden windows can be adapted for the same purposes.

Even if you don’t have a single board, you can still make a bench for your favorite dacha!

That's all! Simple benches You can do it yourself in just a few hours, without spending much on materials. And it will definitely become a favorite vacation spot for the whole family. After all, it’s so nice to read on a bench, drink tea, chat with friends, or even work while taking your laptop with you!

Garden benches are the most popular small architectural forms. They can be made in any size and design, but in addition to their direct purpose, benches also perform a decorative function. You can make a garden bench for yourself using our drawings and photographs.

How to make a bench from waste materials

The easiest way is to make a bench out of wood. This traditional material For garden furniture, affordable and easy to process. But even in this case, you can save money by choosing as the main material the one that literally lies under your feet.

The first option is trees, poles and stumps from your own site or a nearby forest plantation, in which sanitary felling is carried out.

Having carefully cut off a couple of medium-sized stumps, they can be placed on the base of the bench. Use poles to make a bottom crossbar for structural rigidity. And for sitting, loosen part of the trunk on the circular. If there is no equipment for longitudinal sawing, then you can take an unedged board 75 mm thick.

In this example, the bench is already more comfortable - in addition to the seat, it also has a backrest. The model is a little more complicated, since you will have to find a higher part of the trunk and process it in two steps - first make a profile cut with a “ledge”, and then split the workpiece into two halves.

And to assemble the next bench, you will need:

• two short logs of the same diameter for the base;
• two medium-thick poles for back support;
• one long log, sawn into two halves (for the seat and back).

In short logs, you need to choose a groove so that the long log fits into it. Then the seat is secured in the grooves, and each pole is fixed at two points - to the base and to the seat. For fastening, it is better to choose powerful self-tapping wood bolts.

Another budget material for a country bench - pallets ( wooden pallets). But not just any pallet is suitable for making garden furniture. Ideally, you need a good edged board, a so-called Euro pallet, which can be identified by the EUR marking.

In principle, the standard width of a Euro pallet is somewhat large for a seat - 80 cm. You can shorten it to 67 cm by cutting it along the contour of the central bar. But you don’t have to do this. Here are some examples simple designs With different options bases and seats:

1. A bench made of four pallets, uncut to width. Three serve as the base, and the fourth serves as the back. You will have to remove some of the support bars from the pallet for the backrest, and ensure the rigidity of the bench using wooden slats.

2. In this case, four pallets are also used, but already trimmed. Three ropes woven with a braid are used to secure the backrest, and wallpaper nails are used for decoration.

3. This bench is made from just two pallets. One is whole, and the second is cut and, as it were, bent at an angle - it serves as both a seat and a backrest. The design is good for its mobility - there are small wheels as legs.

Perhaps the only inconvenience of using Euro pallets as source material- these are standard sizes of 80x120 cm. They to some extent limit the possibilities for creativity. The use of ordinary lumber (boards, beams and beams) allows you to make a garden bench to suit every taste.

Board and block

It’s worth saying right away that any bench drawing can be adjusted for specific conditions. The only limitation is that the thickness of the board and the cross-section of the beam are sufficient to provide load-bearing properties.

Below is a drawing of a bench, which is made of only three “paired” elements:

• seat and back;
• a short support (back leg) made of a trapezoid-shaped board;
• long support (front leg).

1- front leg; 2 - rear leg; 3 - seat; 4 - back; 5 - front view; 6 - side view

The result is a stable structure with a triangle at the base and two transverse stiffeners.

This is what this bench looks like in real life.

This drawing shows the bench in a more complex design. To make it, you need a 40x140 mm board (supports, back and seat), a 40x70 mm block (short bundles of supports) and a 20 mm board (long bundle between the sidewalls).

And this is the same design, but using a board and a block 75 mm thick. Small differences in the base and attachment of the ligaments are not fundamental.

In principle, there is only one condition - the boards in the seat are fastened with a small gap, sufficient to compensate for the expansion of the wood under high humidity.

Large forms

Wooden benches in a “large format” look original.

For example, here is a “thick” unedged board across the entire width of the log. Covered with clear varnish, it conveys natural beauty wood with all color transitions.

From rounded logs you can build not only a cottage or a bathhouse, but also a garden bench like this.

And from timber you can assemble an original chair that can serve not only under a canopy, but also on outdoors— removable pillows are easy to bring into the house in bad weather.

Stone and wood

Stone, like wood, also fits organically into the landscape suburban area. Of course, a smooth slab is practically never found in nature, but you can use sawn stone.

The next option is easier to implement - the bench is made of small blocks of wild stone. And since such a surface is not only cold, but also uneven, you can’t do without pillows.

Pillows add comfort, but you have to constantly bring them in and out. That is why for seats in garden benches, regardless of the base material, wood is used. Like this one original bench, at the base of which a gabion is used (a mesh cage filled with stone, crushed stone or pebbles).

Concrete is no less popular for making the base of a bench. But it’s difficult to make a form with a complex contour for pouring at once, but small formwork is simple. And even " cold seam"When poured in two steps, the strength of the structure (such as in this photo) will not be affected.

Another option artificial stone– hollow construction concrete blocks. It is enough to fasten them together with good masonry glue, and lay a beam in the cavity, and the bench is ready.

Metal and wood

The simplest benches in design metal frame use a square profile.

You can weld two sidewalls in the shape of the letter “H” from a profile pipe, and a solid wooden seat will also serve as a “stiffener.”

IN following example solid wood is also used as a stiffening element, but the supports are made in the form of a square with a crossbar for fastening the seat.

And this is the simplest self-supporting structure made of a square profile, the strength and rigidity of the welded base is sufficient for the seat to be made from a wooden block.

The following photo shows a factory-made bench.

But if you have a pipe bender in your home workshop (and it’s easy to make one with your own hands), then bend two types of arches and a “wave” from round pipe Just. Then the metal blanks must be welded, plastic plugs must be placed on the legs (sold for any profile and pipe size) and the bars must be secured to the “wave”.

To apply for a loan online, just fill out an application form on the MFO website containing your passport details, the desired loan amount and some other information. Also, if you plan to receive money on the card, you will need to have a registered Visa or MasterCard with CVV2 to receive funds.

A decision on an application is made from a few minutes to half an hour. If the loan amount exceeds 30-50 thousand rubles, the application is reviewed manually, which affects the processing time. The speed of receipt of money depends on the chosen method of receipt - to an account, to a card, to an electronic wallet or in cash and on the loan amount. Money is transferred at any time of the day, as well as on holidays and weekends.

You can increase the loan term for a period of 1-30 days. In some cases, if there are compelling reasons, the loan is extended without overpayments. In other cases, an additional commission fee is paid for loan extension. The number of possible extensions must be clarified with the microfinance organization.

For the first time, you can borrow an amount from 1 thousand rubles to 30 thousand rubles, depending on different conditions. The size of the first loan is affected by the borrower’s income, loan term, good credit history, and conditions for certain programs.

The MFO checks the validity of the passport through the FMS database, registration address, contact information of the borrower, assesses his solvency, and looks at open records in the FSSP database. Online client profiles are checked by an automated scoring system. Data from the BKI and bank card information are also checked.

Bad credit history still no reason to expect rejection. If the CI is damaged due to the fault of the creditor bank, you can contact the BCI with a statement. In other cases, you can try to correct it with a chain of small microloans taken sequentially and repaid in a timely manner.

If the loan is not given, you should find out the reason. For example, get your CI and study it to see if there are any delays caused by the banks. Maybe you have accumulated debt on utility bills - it needs to be paid off. After some time, you can re-apply to the microfinance organization to receive a smaller loan amount. Several consecutive small loans taken and repaid in a timely manner will improve your position in MFOs.

If the money is not returned to the MFO in due time, you will be charged penalties for certain period provided for by the contract. If you do not contact and repay the loan during this time, your case will be referred to a collection agency, which will work with you to resolve how to return the money. If you avoid communicating with debt collectors, the case will be transferred to bailiffs who:

1. funds on the salary card will be seized;
2. travel abroad will be limited;
3. will seize your personal property.