The best plastic windows rating. Plastic windows: customer reviews of companies

While windows with carved wooden profiles have become the destiny and decoration of expensive houses, plastic windows have become widely used for installation in the main “residential mass”. The advantages of this material, and, equally, of the design itself, many include obvious noise and heat insulation, good resistance to various climatic conditions and the durability that goes with it. The main “trick” plastic windows lies in the absence of the need for maintenance when the seasons change, as opposed to the same wooden frames.

The plastic window production industry (especially in recent years) has literally flooded the domestic Russian market with an abundance of profiles and an assortment of diverse models. This situation has created a precedent for the complexity of the choice, which affects not only inexperienced beginners, but also real experts in the field of producing products of this type. Having analyzed the current situation on the market, we have selected for you the 15 best manufacturers of plastic windows, the superiority of which has been repeatedly confirmed by prestigious awards and flattering user reviews. The following parameters were selected as criteria for selecting applicants for the rating:

• the company’s popularity among Russian consumers (mentioned on forums, thematic websites and conversations);
• expert reviews on production technologies and product quality;
• general parameters of reliability and operational durability of the assortment;
• price range of plastic window models (average price).

The most popular manufacturers of plastic windows

5 Trocal

The oldest manufacturer of plastic windows
Country: Germany
Rating (2018): 4.9

If you believe the sources, the activities of the Trocal company began back in 1954 - it was then that production lines (it is unknown on what scale) began to work towards the creation of the first PVC profiles. Honoring their traditions, the Germans to this day produce designs that are successfully used for installation in apartments and private houses.

The problems and main advantages of profiles from Trocal lie in the chosen path of uniqueness. The manufacturer relied on increasing the reliability of the design by increasing rigidity and resistance to various kinds deformations. If in the case of windows this approach was successful good results, then the reinforced profiles turned out to be too heavy for the doors. In matters of design, users were more than satisfied: absolutely the entire line of the company is not devoid of design sophistication, which, in general, is rare even for honored market leaders. In general, the level of the company is very high: it is good both in terms of key product characteristics and in terms of cost. A clear contender for the highest position.

4 Salamander

Manufacturer of the highest quality windows
Country: Germany
Rating (2018): 4.9

One step away from the prestigious top three is another German brand, which produces, perhaps, the best window profiles in the whole world. Salamander's personal “curse” is status. Due to belonging to the truly premium strata of manufacturers, the cost of their products goes far beyond the scope of their competitors, which, of course, has a negative impact on attracting a mass client.

The second negative aspect is... clone companies. Huge prices created a precedent for copies of windows from a well-known German company to begin to be produced in a handicraft way and “leaked” onto the market in pursuit of the same colossal figures. The precedent is unpleasant and does not play into the hands of the brand at all. But, be that as it may, Salamander continues to follow the intended course and offers the segment more and more innovative developments.

3 Rehau

High-tech production. The most advanced brand
A country: Germany/Russia
Rating (2018): 4.9

The third is the permanent competitor of KBE and VEKA, which has won the hearts of consumers (and experts) with its constant search for the ideal profile formula. In the REHAU laboratories, prototypes are being developed and tested day after day, only a small part of which is honored to appear in the store catalogue.

The process of manufacturing plastic windows itself is also harsh. With truly German pedantry and punctuality, each technological operation accompanied by a process of strict control. Thanks to this approach, the Germans managed to significantly reduce the percentage of defects and reduce the costs of reprocessing unusable products. But, like all other companies, REHAU also had a drawback. Despite the fact that the overall number of consumers is large, some are put off by the company's pricing policy. Yes, they manage to reduce internal costs, but they are in no hurry to meet new customers halfway (in terms of the cost of finished products).

2 KBE

Focus on consumer needs. The most affordable prices
A country: Germany/Russia
Rating (2018): 4.9

The second contender for leadership is another representative of Germany in the production of PVC profiles, who has earned such a high place due to his complete focus on the consumer. The company's assortment concentrates huge variety window profiles suitable for both southern and northern regions large country, and their cost is good example for competitors (and, at the same time, the company’s most important advantage, along with the highest quality). By the way, quality concerns not only profiles, but also all the accessories accompanying them.

The disadvantage of KBE is prosaic and requires some drawing of parallels. The fact is that German products (produced directly in Germany) are the standard. But windows produced in Russian factories have a flaw in the form of gradual yellowing of the plastic, which some users did not fail to point out.

Until relatively recently, a plastic window in a house was akin to “know-how” that came far from abroad. Today this thing has become so commonplace that it is already wooden frames They look like a rare curiosity, irrevocably giving way to “eternal” plastic. But what is better: a product of carpentry or conveyor technology? What are their advantages and disadvantages? We find out from the detailed comparison table:

1 VEKA

The best range of products in terms of price and quality
A country: Germany/Russia
Rating (2018): 5.0

A German brand that actively and successfully retains the largest segment of the domestic consumer audience for its products. The VEKA company entered the Russian market in 1999 and in such a short period of time managed to win a number of significant victories. The opened branch of VEKA Rus became the first in Russia to receive a certificate of compliance with European RAL quality standards - a mark that none of the company’s closest competitors has.

In addition, thanks to the full technical equipment of the production lines of the factories, the company abandoned the production of low-grade products, turning all attention to the production of class “A” profiles. This means that all models of window profiles (of which there are six in VEKA) have a high degree of protection from external environmental factors and are suitable for use in any climatic conditions.

The best manufacturers of middle and premium class plastic windows

10 Kaleva

The only Russian full-cycle company
Country Russia
Rating (2018): 4.5

Kaleva is a Russian company with a by no means Russian name, operating according to a full cycle scheme. This approach involves taking a product from its design to installation at the customer's request. A rare case, especially in the environment domestic producers. However, even in this field of activity, serious questions arose for the company.

Basically, the company is let down by dealer centers, of which there are at least eight dozen. According to customers, the organization of the installation process in some cities is extremely poor and requires subsequent dismantling with repeated replacement. Despite all the quality of PVC profiles, in such a situation they will be haunted by an inevitable loss of performance properties. By the way, the head office does not bother, but delegates solving problems with dealers to the clients themselves. Not the best professional approach, but there is hope that measures will be taken in the future.

9 Deceuninck

One of the world leaders in the production of plastic windows
Country: Belgium/Russia
Rating (2018): 4.6

A Belgian concern whose world fame greatly outstrips its fame among Russian consumers. According to authoritative sources, The Deceuninck Group consistently ranks among the world's leading manufacturers of PVC windows.

As for the Russian branch, the most significant contribution to the company’s common cause was receiving a prestigious award for creating the “Favorite Space” profile system. From obvious advantages It should be highlighted that all window options have a certificate of compliance with international standards. But this plus had a negative impact on the price level, “thanks to” which a relatively small audience resorts to installing Deceuninck windows. If we talk about cheap models, they are frankly worse than similar products from opponents, both in terms of quality and overall appearance. Thus, a world-famous company can be content with only getting into the TOP 15 best, and not a hint of leadership.

8 Krauss

The best range of lightweight profiles
Country Russia
Rating (2018): 4.6

Since the company’s production lines are located in Krasnodar, Krauss plastic windows, quite logically, are designed only for warm climates. That is, the “one-sided” specialization of products instantly cut off the entire Siberian region (and others like it) from the consumer part.

However, you should not blame the company for the chosen path, since the quality of PVC windows is at the proper level. The variety of profiles leaves much to be desired, but the available assortment shows itself exclusively on the good side. There is only one nuance that is alarming, which, even with proper installation, nullifies all the pleasant impressions of the product. The fact is that, according to the enterprise standard, some series of windows are equipped with a thin layer of sealing (less than three millimeters). This causes drafts and dust accumulation (according to users), which is “treated” by installing other rubber bands.

7 Panorama

The company from St. Petersburg is not very popular, although it has existed on the domestic market for more than 20 years. It would seem that there are not many prerequisites for this. According to consumers, the company’s PVC profiles are of good quality and, in general, deserve to be, if not in the TOP-3, then certainly in the top five. They have an optimal balance of rigidity, provide good insulation (especially the five- and six-chamber Enwin Waiz 70 and Deceuninck Favorit Space profiles), and also have a pleasant appearance. In addition, the cost of all models (at least standard ones) is within the market average.

The reason for Panorama's low popularity is its approach to customer service. As experts note, the company’s service is not distinguished by efficiency and intrusiveness... to such an extent that information about all options has to be pulled out, as they say, “by thread.”

6 WDS (Window Door Systems)

Best performance ability
Country Ukraine
Rating (2018): 4.7

The young Ukrainian company, which began its activities in 2006, has shown a very serious attitude towards “capturing” a decent segment of the market. The work of WDS is based on the principle of “production for our own” - it was under this motto that the first years of the company’s activity were spent. Due to the fact that when developing the profiles, all aspects of the climate of Ukraine, Belarus and Russia were taken into account, the windows received an simply insane level of “survivability” even under poor operating conditions.

From the point of view of assortment, WDS is also doing well. Today the company has six lines, each of which has a unique design and simplicity. The company's disadvantage lies in the limited distribution network: the company's activities in Russia do not extend beyond the regions adjacent to Moscow (Lipetsk, Bryansk, Oryol, etc.). This fact largely determines such a low place in the final ranking, but just appearing in it can already be considered a good result.

5 JUICE

The best material base
Country Russia
Rating (2018): 4.7

“Samara Window Constructions” owes its origins largely to the German concern Profine, under whose leadership they have been working since 1999. The paradox of the company is that, without having any production base, COK “lives” on the developments of the above-mentioned concern, namely the KBE brand. It would seem that drawing such a parallel with a world-famous company should have led to a massive increase in demand for the product...

...but this, unfortunately, did not happen. Despite their excellent level of reliability and durability, plastic window panels were endowed with one very insidious flaw, which appeared only after several years of safe use. After a certain time, the plastic begins to turn yellow intensely, which indicates a possible violation technological process produced at a Russian plant.

4 LG Chem

The best eastern supplier of plastic windows
Country: South Korea
Rating (2018): 4.7

The only representative of the eastern trend in the production of plastic windows, relying on the distribution of goods in the eastern part of Russia. Needless to say: due to the close location, the main consumers of PVC profiles are residents of the Far East (and only a small part of the windows reaches the rest of the large state). This fact largely predetermined the fact that the main characteristics of the product have not yet received more in-depth analysis and study.

Based on user reviews, we can conclude that LG Chem windows (in all their variety) have good insulating characteristics and are made of high-quality glossy plastic. True, the latter often acts as the initiator of problems - if the gloss is damaged, it is not so easy to restore its former appearance. As for the price, it is low in comparison with competitors and, in general, looks good against the backdrop of high quality.

3 Plafen

One of the best manufacturers premium windows
Country: Austria/Russia
Rating (2018): 4.8

Extra-level PVC profiles, the installation of which will satisfy even the most picky buyer. The Plafen assortment includes five model series, designated by the letters S, T, E, L, C. The main feature is the stylization of the wood profiles different varieties, which gives a more expensive look and is suitable for any interior. According to the company's official website, minimum term The window service life is more than 60 years without any serious breakdowns or defects. In general, the comments of the owners fully confirm such a serious statement from the manufacturers: when good installation There are no drafts or freezing observed.

Of course, there were some drawbacks. High-quality windows simply could not help but acquire a hefty price tag, which only a small part of consumers could afford. And the company itself positions itself as a reliable supplier of windows for business, which also scares off ordinary potential buyers.

2 Proplex

Good quality at a low price
Country: Austria/Russia
Rating (2018): 4.8

One of the few brands of Austrian/Russian origin, characterized by affordable prices and full adaptation to the climatic conditions of the country. Proplex's assets include the excellent quality of PVC, which is not prone to yellowing and has a high level of strength. This fact is often enough for consumers - people are happy to purchase windows for installation in both private houses and apartments. The only problem is that the brand’s assortment contains models whose appearance smacks of hackneyedness and obsolescence. These cost much less than new developments, but show no less convincing results in all operational parameters.

The second problem of Proplex (much more global) is related to the scale of the network - the lack of a certificate of compliance with international standards greatly prevents the company from expanding beyond the Russian market.

1 Montblanc

Optimal balance of performance characteristics
Country Russia
Rating (2018): 4.9

Montblanc is a subsidiary of the STL-Extrusion concern, which has grown significantly over more than ten years of work on the market. Its main asset was the development of an extensive network of dealers, thanks to which the brand acquired a solid customer base. Not the same as German brands, but still quite decent.

From the point of view of advantages/disadvantages, the company has a strikingly one-sided positive balance sheet - the only liability that can be written down is the lack of an ISO certificate of conformity at factories located in Russia. Otherwise, there is a complete idyll: both in terms of the quality of the windows, and in terms of fittings (provided by partner factories), and in terms of durability. Montblanc's range (currently) includes seven types of profiles, each of which has a unique set of chambers and widths for different climatic conditions. A good and inexpensive option for glazing a house or apartment.

How to choose the best plastic windows?

The main obstacle to choosing the right plastic window for your home or apartment is the fact that there are so many different profiles available. But the difficulties of buyers are connected not only with them - any window has many nuances that can dramatically affect performance characteristics. Therefore, in the selection process, “Mark of Quality” recommends paying attention to the following aspects:

Profile type. According to known standards, window profiles are divided into three groups: blind, turning and tilt-and-turn. The former will be suitable for installation in large areas that do not require ventilation. The remaining options, on the contrary, are best purchased for small, ventilated rooms.

Number of cameras. Here you should be guided by the following principle: the more cameras a window has, the warmer the room will be. Choose the number of double-glazed windows according to climatic conditions: from three for severe winters, and less if you live in warm areas countries.

Glass. Recently, manufacturers have moved away from using ordinary glass, replacing it with low-emissivity samples enriched with silver atoms (even safer, even newer). This is very easy to check: a lit match in the case of “emissive” glass will produce not a red, but a violet glow.

Accessories. An element on which we recommend not to skimp. Whatever the frame (aka profile), the main consumables of plastic windows are the fittings (handles, locks and combined awnings).

Manufacturer. Advice, last in order, but most important in terms of significance. Pre-selecting a manufacturer will give you the opportunity to look at something in the range, as well as find out the approximate cost of the order. We strongly recommend that you take a closer look at the TOP 15 nominees.

People of the older generation remember how many unpleasant moments they caused wooden windows, which constantly warped and demanded ongoing care. With the advent of plastic analogues, the situation has changed radically, especially since today plastic windows, unlike the first samples, have a very affordable price, especially since they can be easily supplied even on credit. Meanwhile, difficulties arose related to the selection of quality products and enterprises capable of supplying and installing finished goods in the shortest possible time, and this is especially difficult to do in Moscow. Naturally, they must be of high quality and look perfect. The rating of companies installing plastic windows in Moscow 2018 can help in this difficult issue.

What was taken into account when compiling the rating

Not so long ago, manufacturers of profiles used for the manufacture of double-glazed windows could literally be counted on one hand; today many companies are engaged in this. This also applies to enterprises involved in the sale, delivery and installation of window products. Among them there are a large number of real professionals, for whom the most important thing is not quick profit, but a good name and authority; there are, of course, outright scammers who do not comply with contract terms and clearly inflate prices.

At the same time, the external “picture” always looks perfect, which means that it was extremely difficult to compile a rating of window companies in Moscow 2018. By the way, such ratings are periodically compiled by various companies, and each follows its own path. For us reviews are more important grateful customers, and to understand which company is better, we had to compare the number of completed orders with the number of negative and positive reviews. Understand public opinion A social survey also helped, although our opinion, of course, cannot claim exclusivity.

TOP 5 best

Choosing the right profile is already half the battle, since it is its quality that determines how comfortable you will feel and how much you will have to pay for coolants. It's no secret that windows account for a fifth of all losses, especially when it comes to poor-quality installation. Before paying money, you should study the rating of companies installing plastic windows in Moscow 2018, read information on special forums, and carefully read the proposed conditions. Preference should be given to professionals involved in production, sales, delivery and installation, that is, they provide a range of turnkey services.

• 5th place. “Window Factory” - according to some ratings, this is the best company for installing plastic windows in Moscow, but according to our research, this is an honorary “bronze”. The company’s specialists work with expensive Deceuninck and Rehau profiles, as well as with the KBE class “A” profile. There are 15 order acceptance points open in different parts of the capital.

• 4th place. “Paradise Windows” is an enterprise operating in the capital’s market for several years. Over the years of operation, window products produced by the company have received recognition among clients and have been appreciated by experts. Specialists have mastered the profiles “Rehau”, “Veka”, “KBE” and “Richmond”.

• 3rd place. OkonProf - over five years of work in the market of Moscow and the Moscow region, about 5 thousand orders were completed. Due to the correct approach to working with suppliers, the cost of windows was significantly reduced, which was highly appreciated by customers.

• 2nd place. Moscow windows - no time best company for the installation of plastic windows in Moscow, today occupies an honorable second place. In addition to plastic windows and balcony blocks, he also installs roller blinds.

• 1 place. PanOkna is a company engaged in the manufacture and installation of plastic, aluminum and wooden structures. Currently this is the best window installation company in Moscow. Several profiles are used for production, but KBE and Rehau double-glazed windows are special products. We offer services for finishing the floor, insulating balconies and loggias, installing a parapet and installing a balcony roof. Ready-made panels for finishing are available for sale.

Perhaps the opinion of experts and consumers voiced by us does not agree with your opinion, and this is not surprising, since this segment of the market represents a huge number of enterprises. It is also possible that one of the race leaders missed deadlines and other violations. No one is immune from this, but in general these are real professionals who know their job.