How to make catching belts for fruit trees. Do-it-yourself tree catching belt - the best protection against garden pests

Starting from the first warm days, a lot of insects become active in the summer cottage, posing a serious threat to the health of the plantings and the future harvest. Self-made trapping belts on fruit trees will help protect your garden from pests.

What does this design look like and what is its purpose?

There are many design options for catching belts, but most often they look like a strip tightly attached to a tree trunk. The most suitable materials for such protection can be different materials, for example, film tightly fitting to wood, foam rubber, glass wool, non-woven material.

The purpose of using trapping belts on fruit trees

Depending on the design, such protection of fruit trees from pests allows:

• collect living insects moving from the soil to the crown, so that the summer resident can then destroy them;
• Protect caterpillars, ants, beetles or larvae with a sticky substance or insecticide applied to the belt.

Due to the fact that the belt can be on a tree with early spring and up to late autumn, it is effective against not only those insects that move to the crown from the ground surface or descend down for further settlement. It will help to significantly reduce the population of all kinds of larvae that are for the time being hidden under the bark of a cherry, pear, or other tree.

This fully applies to the fight against the flower beetle on pear and apple fruit trees. The larvae laid by small beetles destroy the buds from the inside, as a result of which the number of ovaries decreases significantly.

Another enemy is the bark beetle. Its larvae make strange passages under the bark, weakening the tree and even leading to its death. How to fight bark beetle on fruit trees? In addition to the use of insecticides, which are not always safe, during the period of reproduction and emergence of the pest, you can use adhesive-based trapping belts that stop crawling insects.

Protected with your own hands fruit trees We owe only to hunting belts that during the spring-summer season the number of many crawling insects has significantly decreased. But is it possible to control aphids on fruit trees based on the properties of trapping structures?

Yes, although aphids can fly from plant to plant, they are mostly carried by ants. That is why their accumulations on young succulent shoots, leaf petioles and buds are so widespread. If you control the ants, then the number of aphids will seriously decrease.

How to make a hunting belt for a fruit tree?

Designs that you can make yourself from scrap materials are divided into three classes.

Dry trap belts are essentially traps designed to stop insects on their way to the top and food source. The mechanism for protecting fruit trees from pests here is to create an obstacle, having reached which the pest would not be able to continue its journey.

These can be smooth strips of plastic tightly attached to the trunk and skeletal branches, or all sorts of structures in the form of funnels, cones or skirts. As for garden tree make a catch belt of the latest, most effective variety?

Operating procedure:

1. Suitable for young plants top part plastic bottles of various capacities.
2. First, cracks and damage to the bark are cleaned and treated with clay.
3. Having cut the container lengthwise and removed the bottom, an improvised belt is put on the trunk with a socket towards the soil.
4. They are firmly fixed 70–80 cm from the ground with tape or film so that insects do not have the opportunity to continue their journey upward.
5. As insects are collected under the cone, they need to be removed and destroyed. On average, the frequency of the procedure is 10–14 days.

In a similar way, you can make a catching belt for a fruit tree with your own hands, simultaneously directed both up and down.

Porous and fibrous materials also help retard the movement of insects. For a hunting belt, you can use coarse burlap, foam rubber or mineral wool, which is wrapped around the trunk and tightly secured at a level of 70–100 cm from the ground.

One more useful variety are hunting belts and in the form of a strip fixed to a tree, processed. In this case, the insects do not linger on the tape, but die, falling under the crown. Although such a device does not need to be cleaned, it is still necessary to update the impregnation.

But the most popular are sticky catching belts with an applied adhesive layer. As a basis for such plant protection, you can take film, non-woven material, cardboard or wax paper.

1. The strip is fixed to a pre-treated trunk.
2. After this, a thick layer of a special adhesive is applied to it. If you couldn’t find glue for insects, a composition for rodents will do.
3. The coating is replaced at least once a month.

This type of trapping belt can be useful from early spring until pre-winter, effectively neutralizing a wide variety of pests. If the base is made of waterproof resistant material, then it can be used repeatedly, only by regularly changing the adhesive composition.

Video about catching belts for garden trees

Having familiarized yourself with numerous recommendations for amateur gardeners, you can find out that in summer and autumn periods It is necessary to carry out thorough pest control. The most dangerous of them is the codling moth, since the harm it causes is difficult to underestimate. For these purposes, various agrotechnical measures are carried out. A special place among them is the cleaning of bark from trees, but the effectiveness of this method is not sufficient to use it in independent version when fighting the codling moth.

Catching belts are the most effective method

In this regard, gardeners came to the conclusion that the most effective method cleaning fruit trees from codling moth and pincers is the use of catch belts.

The principle of operation of catch belts

Hunting belts in independent form do not guarantee pest control unless you use self-adhesive belts or pesticide-impregnated belts. The use of trapping belts involves concentrating caterpillars or other pests in a certain place, and there are cases when the number of insects caught reached more than 600 individuals. So if you are planning to get high yield, then it’s time to think about buying hunting belts or making them yourself.

Overlay Rules

Considering the above, the use of tree catching belts must be carried out in accordance with certain rules.

apply after flowering

Firstly, the application of belts on fruit trees is carried out at the end of 2-3 weeks after flowering, when there is still some time before the start of the mass season of codling moths.

the role of clearing trees of bark

Secondly, it is necessary to mention again the proven method of gardeners, which consists in clearing trees of dead bark. This procedure is carried out on the bottom of the trunk 25 cm above the soil level.

fixation rules

Thirdly, the rule for applying catcher belts states that the upper part of the belt is tightly fixed to the bark, and the lower part is left free, which increases the likelihood of caterpillars getting under it; in this case, interception of the bark must be excluded, for which it is necessary to loosen the ties every month.

inspection and destruction of pests

And finally, to improve efficiency this method Inspection of hunting belts is carried out at least once every 10 days, especially during the development of codling moth caterpillars, followed by the destruction of detected pests and disinfection of the belt.

Materials required for manufacturing

Making a hunting belt with your own hands is within the power of each of us. The main material is corrugated paper or burlap. The main disadvantage of the belt is corrugated paper is its one-time use, since the selection of pests from it is associated with certain difficulties. For repeated use, belts made from old blankets or any other fleecy fabric folded in two layers are ideal.

Manufacturing technique

The technique of making a hunting belt is not difficult.

To do this, it is enough to cut a strip, the width of which is no more than 10-20 cm, and the length is twice the girth of the tree trunk. Also optimal material Can be newspaper or any other thick paper. Having folded it in four or five layers and made a tourniquet, it must be placed around the trunk, covered with a strip of thick paper and secured, like any other hunting belts on fruit trees. Experienced gardeners advise choosing a belt design that suits you one hundred percent. For example, for amateur gardeners fishing such a belt will be the one from which it will be most convenient to select caterpillars, which will become excellent bait.

In some areas, codling moth development occurs in two generations. Gardeners whose summer cottages located in these areas should apply the belts in mid-June and check them every week until the belt is removed, which should ideally occur in mid-August.

If you follow the advice of experienced professionals, then having a double set of trapping belts greatly increases the effectiveness of this method, since in this case, when you remove one set of belts, you immediately apply a second one, having previously destroyed the pests remaining at the place where the belt is attached. If the belt is made of fabric, then processing it is not difficult: just soak it in hot water with powder, and after a few hours, use a brush to remove dirt and cocoons. After drying for fresh air The belt is clean and ready for use again.

Mid-August is not a reason to take off your belts. At this time, gardeners advise leaving them on trees until late autumn, until they become full of mites. But there is a certain nuance here: the most convenient for collecting ticks will be belts made of corrugated paper, which are applied not only to the trunk, but also to all skeletal branches. At the end of the season, such belts are removed and buried in a compost pit.

Ecotrap fishing belt is a very effective tool

Ecotrap trapping belts are an effective means of fighting insects. They are a toxic-free adhesive that is applied in the form of trapping belts to tree trunks. The glue is applied in the spring months, shortly before insects migrate from the soil to the tree crowns. During mass migration, insect pests stick to the belt, which ensures the protection of your future harvest.

If you want to collect good harvest fruits and maintain the health of trees in the garden, it is necessary to protect them from small insects and rodents. Control measures are extremely simple - you need to “put” special protection on the tree - a hunting belt. This is a very effective and affordable method of insect control.

Perhaps, many novice summer residents have more than once observed such a funny picture of insects climbing or descending together along a tree trunk. There is nothing good in this, because from the invasion uninvited guests the tree suffers and the yield decreases. Trunk fruit tree is a transit route between two important objects for insects: buds and tree bark. It is in the folds of the bark that pests can spend the night and feed on leaves, fruits and tree crowns. That is why it is necessary to install special protection for trees, which will at the same time act as a kind of trap for pests.

Depending on the season, installing special protective belts on trees allows you to completely limit the access of insects to the top or back.

From early spring to late autumn, a tree catching belt will only bring benefits. Naturally, you cannot count on 100% success and protection of the plant from pests, since trees can be attacked not only by creeping insects, but also by flying ones. This needs to be understood, but you can still count on 40% success from insects, and this means the safety of the same 40% of the harvest! And if you remember how much you had to fight the codling moth, then this problem will be solved, and even more initial stage when the caterpillars attack the lower trunks of trees. By the way, the catching belt “collects” a large number of“live harvest” - caterpillars that cause severe damage to apple trees and other fruit trees.

Types of hunting belts

Let's look at the types of protection:

1. Dry belt. It is made from coarse fabric(mostly burlap), rubber or corrugated paper. The width of the material is 20 cm. Before you protect the wood, you need to cover up all the cracks. This preparation will not allow pests to crawl through cracks under the paper or thick fabric. The material is tied with a rope; the long ends cannot be cut - they must remain free (similar to a funnel). This is necessary so that the caterpillars from the lower part cannot get up and are thrown to the ground, and if they crawl higher, they will remain in the funnel pocket. They are easy to collect and destroy. By the way, such a dry belt can be secured with either rope or wire. Then there is no need to remove protection in the cold.
2. Self-killing belt - the manufacturing principle is similar to the previous type of hunting belt. The only difference is that the base of the protective belt is impregnated with insecticides. In order not to harm the tree, you must use only approved products. To make the catching belt work more efficiently, it is additionally wrapped with film in the upper part.
3. The adhesive belt consists of paper and glue welded from certain components. The belt is made and wrapped around the tree in the fall so that insects and pests descending down to the trunk are delayed.

How to make a catch belt

The ideal option is to buy a ready-made hunting belt, but when there are a lot of trees, it would be more advisable to make the protection yourself. Making a catch belt with your own hands is quite simple. In just a few hours you can “dress” 3-5 trees with protection.

Dry belt

To work, you need to prepare a strip (fabric, corrugated paper or rubber) 20 cm wide. The length of the material will depend on the thickness of the wood. Before you begin tying the trees, all existing cracks must be covered.

What to consider when constructing a dry fishing belt:

1. It is more convenient to use stretch film for wrapping, especially when there is wind outside. Compared to tape, it does not stick to the surface.
2. Corrugated cardboard is best used in autumn time- in this way you can protect fruit trees from pests that are looking for a secluded place to lay their offspring there or settle down for the winter.
3. During the warm season, especially in summer period, it is better not to use cardboard.

What you need to prepare for work:

• foam;
• stretch film;
• scissors;

How to properly wrap a tree:

1. First prepare the foam. It is necessary to measure the material with a margin so that the edges are connected on the tree not joint to joint, but with a small margin.
2. Using stretch film, wrap the foam several times. 2-3 turns will be enough.

It should look like this:

1. Now take a roll of film and, not too tightly, just to remove the gap at the junction of the edge, wrap the foam rubber with stretch film. Make 3-4 turns. Cut the ribbon and carefully press it to the waistband.

1. Use a sharp knife to remove extra tape above the belt at the top and bottom. This way our tree will be neater, and the bark will be freed from excess insulation.

This is what you should get:

This method of wrapping trapping belts on fruit trees will save time.

You need to check the belt on each tree once a week. It is worth considering that the trap will catch not only insects that harm the tree, but also beneficial ones. Therefore, in order not to disturb the natural balance, you need to carefully remove the belt and chicken out beneficial insects onto the newspaper. Now we just have to wait for them to crawl away on their own. If there are pests left on the paper, they will certainly be burned.

The second option for making a dry hunting belt is in the form of a funnel. The material can be rubber. You need to take a sheet of rubber 5 mm thick. The size of the trap will depend on the thickness of the tree. The rubber is wrapped around the tree, the edges need to be glued. You will get a kind of small funnel; it needs to be filled with natural glue. It is prepared from water, fruit tree leaves and vegetable oil.

The third option for a catching belt is a collar. It is as easy to make as the previous protective belt designs. This design is distinguished by the fact that it remains almost unnoticeable.

How to make a dry hunting belt:

1. Determine the parameters of the tree - we need to find out the circumference and measure 50 cm from the ground.
2. Now we prepare a template - cut out a sheet of dense material (rubber, PVC film, etc.). The thickness of the material should not exceed 5 mm.
3. We wrap the strip around the trunk to form a collar. It is advisable to bend the edges.
4. You can pour a little vegetable oil into this “container”. Some summer residents brew a special aromatic decoction for pests from small amount water, leaves of this tree and sunflower oil. The fragrant liquid attracts insects.

Self-killing trap belt

Such protection for wood is made from any suitable material: corrugated paper, matting or burlap impregnated with toxic chemicals. This is the main difference between this type of protection. Many gardeners try to avoid “poisonous” belts because they believe that the fruits can accumulate toxins. This is a misconception, since the device is aimed at controlling pests and is located at the foot of the tree. Chemical components will not be able to reach the top of the plant.

The main advantage of the self-killing belt is its high efficiency.

Try making your own protection:

1. You will need paper, burlap or thick cardboard. Strip width – 20-25 cm.
2. Soak the belt with an approved pesticide.
3. Wait until the product is absorbed. Wear gloves.
4. Attach the belt to the trunk so that you get something like a funnel or skirt. That is, you need to secure the material in the upper part of the belt, and the lower part should remain free - this way pests will fall into the trap.
5. To prevent the poison from evaporating, wrap the cloth or paper with polyethylene on top.
6. Caterpillars and other pests getting into the belt will be poisoned and die.

This version of the catching belt is suitable for apple trees, since the main pests of the juicy harvest - caterpillars - will not be able to get to the delicacy.

Adhesive Belt

Adhesive or sticky belts are most often used in integrated pest management. They help get rid of ants, small bugs and caterpillars. It is this category of pests that can “bypass” other types of traps.

The principle of an adhesive hunting belt is that a special glue is applied to the base (cardboard or wrapping paper).

How to make a sticky hunting belt with your own hands:

1. Prepare paper or cardboard the right size(around the circumference of the trunk). The width of the workpiece is no more than 25 cm.
2. Apply glue to one side of the belt. It can be purchased at a specialty store for gardening work or cook it yourself. Tar or resin can be used as a sticky trap.
3. Secure the belt to the barrel with wire - the sticky side should be located at the top.
4. All holes, cracks and passages must be sealed. For these purposes, it is allowed to use clay.

Making glue

Popular recipes for glue for hunting belts are made from tar or resin. In the first case, tar (2 parts) is mixed with 1 part burdock oil. The tar is brought to a boil and the oil is carefully added with gentle stirring. The glue is cooked over low heat for 5 hours.

Resin based adhesive:

1. Take 10 parts of pine resin (resin).
2. Add Vaseline - 1.5 parts and the same amount of rosin.
3. The components are thoroughly mixed. The glue is simmered over low heat until it thickens.

The mixture for fighting caterpillars is made as follows: take 200 g of vegetable oil, add 100 g of resin (can be replaced with wax) and grease. Mix the ingredients well and heat over low heat. When the mixture begins to thicken, the glue is ready.

When it is not possible to assemble all the components, you can purchase ready-made glue at a specialty store. It is non-toxic, odorless and colorless. Designed specifically to protect trees, so it can be applied directly to tree bark. The main advantage of this glue is that it can be applied to both dry and wet surfaces.

What you need to know

When dealing with insects, the following must be taken into account:

1. In the place where you plan to install the trapping belt, the inanimate bark must be removed.
2. Cracks formed in the living bark are covered with clay. If this moment is missed, then at the end of summer the pests can settle down for the night or lay offspring.
3. The belt is applied before the kidneys begin to swell. This will help save future harvest from apple blossom beetle.
4. When the flower beetle’s “strike” has begun, it is important to check the belts frequently. Pests caught in the trap are caught on a film, which is first laid on the ground under the tree.
5. Before the start of winter, the belts must be removed from the trees and burned.

Don’t be lazy to install trapping belts on fruit trees and then you will have excellent harvest fruit.

Spring has finally come and the gardens have awakened hibernation, making us happy delicate flowers and young foliage. Looking at blooming trees, we involuntarily begin to imagine what kind of harvest the garden can produce. But a whole army of various pests can interfere with our plans. The question arises: how to protect our harvest from them?

There are several ways to fight. Each of them has its pros and cons. The simplest, at first glance, is to treat the garden with pesticides. We are offered a myriad of these products from different manufacturers.

The accompanying instructions promise guaranteed total destruction of all flying and crawling creatures that dare to visit your garden. It is worth considering that not all insects living on your site are pests. Entomophagous insects (predators that destroy pests) will also come under attack - in fact, we will exterminate our allies.

I suggest considering one of alternative methods protection - traps. Pests can be divided into two groups: those that fly into our garden by air, and those that crawl onto trees along trunks. Their main goal is to provide themselves with food. And they feed on leaves and fruits.

Our task is to prevent them from reaching their goal. Each group has its own way of fighting, or rather, its own type of trap. It is also worth deciding when and how to use these traps.

Just 20-30 years ago, seasonal temperature changes were more predictable. But the rapid development of industry, drainage of swamps, deforestation and creation artificial reservoirs large area did not pass without consequences. The seasons have lost their stability, as can be seen from temperature fluctuations.

Over the past decade, a “shortened” spring has already happened several times - in the third ten days of April, the thermometer rose to 30 degrees. Such distortions affect both the time and duration of tree flowering and the timing of insect emergence. This means that an accurate preliminary forecast becomes unlikely.

Therefore, it is better to hang moth baits a week earlier than two days later.

Moreover, males fly out earlier than females: they begin to look for a mate, and it’s time to take advantage of this. Traps filled with odorous solutions confuse the males, and they drown in them. Females that emerge a few days later are left without partners and will not be able to produce offspring.

Of course, 100% destruction of the pest population is not guaranteed, but none of the known species fight them.

Let's look at the capture method in more detail. First of all, you need to make traps.

Do-it-yourself pest trap made from a plastic bottle

For this we need an ordinary plastic bottle capacity 1.5-2 liters.

In the upper third we cut out three or four windows (the lintels should be wide enough to maintain strength). The better the container is ventilated, the more intense the smell of the bait will spread, attracting pests. Fill the bottle about one third and hang it in the crown of a tree.

What to put in the trap? Almost all moths willingly fly to the smell of various fermenting mixtures. This could be a solution using sugar-containing products (lost jam, sour compote, etc.) or the cheapest beer - they also really like alcohol.

One problem worth mentioning is related to the daily activity schedule of flying pests. Most of them are most active in the evening and at night, and during the day they sit out in secluded places. If you constantly live on a garden plot, this problem can be easily solved. And in the case when the garden is visited only on weekends, it is unlikely to be possible to remove the traps in the morning and hang them out every evening.

If the trap is constantly (24/7) in the crown, there is a risk of destroying some beneficial insects. But taking into account the fact that there are pests that fly during the day (including wasps), let better trap works around the clock rather than not working at all. It should be remembered that not all pests fly out at the same time, and several generations emerge during the summer - the traps will be relevant until the fall.

One cannot help but recall another group of “interested” insects from which all gardens suffer without exception. These are the most numerous insects on the planet - ants. The ants themselves do not eat apples, plums and apricots; the main damage is caused by their “cash cows” – aphids.

The ants only spread it among the trees. There are several ways to prevent this. On sale you can find several types of special garden adhesives and ready-made fishing belts. We will look at a simple way to make hunting belts yourself. For this we need cling film, some knitted fabric (for example, an old T-shirt) and any scraps lubricants– solid oil, nigrol or automotive waste.

Do-it-yourself hunting belt – photo

Now the procedure for making hunting belts with your own hands.

1. At a height of about 20-40 cm, wrap the trunk in several layers of film. It is cling film that is offered, and not any other material. Firstly, it is very plastic, stretches well and will not pinch the bark - this is important for young trees that grow quite intensively.

Secondly, the smooth surface of the film makes it difficult for ants to transport aphids.

2. Cut strips of fabric 2-3 cm wide and long enough to make two or three turns around the trunk. We moisten the strip generously with grease and tie it over the film approximately in the middle.

It is better to hang moth baits a week earlier than two days later. If the tree has smooth bark, then this is enough.

In the case when the hunting belt is placed on a tree with a very rough bark, another operation should be performed. Before wrapping the trunk with film, it is necessary to fill up the unevenness of the bark with ordinary clay, otherwise ants will pass along the cracks, like tunnels, along the trunk under the film. Periodically check the condition of the impregnation and renew it as it dries.

Sometimes ants build “bridges” of their bodies to overcome obstacles, so from time to time you should carefully examine the areas of the trapping belts. Often a tree or bush in contact with the crown is used to bypass the obstacle. Even high grass can serve as a back door to your tree. Having found ants on branches, carefully trace the entire route of their movement and take necessary measures suppression.

A good effect will be achieved by simultaneously attracting entomophagous insects to your garden. But this is a topic for a separate article. Happy hunting!

Pests that fall into homemade traps:

Sweet trap in a bottle

1. Cherry fly

3. Ants

4. Codling moth

5. Cabbage scoop

7. Fruit leaf roller

8. Alenka furry

9. Hawthorn butterfly

10. Ringed silkworm

Homemade hunting belt

1. Apple blossom beetle

2. Goose

3. Weevil

4. Codling moth caterpillars

5. Ants

6. Apple aphid

7. Plum aphid

8. Fruit aphid

9. Ringed silkworm caterpillars (if they fall to the ground)

Do-it-yourself hunting belts against moths

1. Measure the circumference of the trunk and take a belt of the required length with an allowance of 3-4 cm.
2. The belt is folded in half with the adhesive layer inside - straighten the two halves.
3. Wrap the belt around the barrel with the adhesive layer facing outwards, connecting the ends overlapping.
4. Attach the belt along the top and bottom edges with wire or rope. Ready

Insect traps - expert opinion

Many flower growers who have garden plots, use colored glue traps against pests, in particular, the greenhouse whitecap. Such devices can also be used in the home among indoor plants, including those made independently.

The principle of operation of traps is simple: these are sheets of cardboard or plastic of a bright (mostly yellow) color, coated with an adhesive substance; insects fly to the color that attracts them and get stuck. In addition to whiteflies, the traps “collect” fungus gnats, winged aphids and thrips. By the way, most thrips are better caught with blue flower traps.

THE BENEFITS ARE OBVIOUS

Despite their low efficiency - only a certain number of adult insects are destroyed without affecting the larvae - traps are useful for tracking the appearance of the pest and its number during planning protective treatments. Flower traps also catch “random” insects, which in the warm season can fly in from the street and begin to reproduce.

Spring chores in the garden are varied and numerous. There is soil preparation, fiddling with seedlings, replanting, pruning - you never know what to do! However Special attention experienced gardeners pay attention to protecting their perennial plantings (in particular trees) from the invasion of all kinds of pests. And here, hunting belts on trees provide invaluable help.

What are they needed for

You can, of course, poison unwanted visitors with pesticides. However, we note that they are not useful not only for the trees, but also for the owners of the garden. In addition, this treatment will have to be repeated several times, and at the moment of flowering (and especially fruiting), this process is generally strictly prohibited. Considering that trees bloom and bear fruit in different terms, the permitted time range is reduced to a very short time. So they stay mechanical methods, and among them the most effective are hunting belts (for apple trees, pears, plums...). They are absolutely harmless to plants, do not contaminate the soil and air with unnecessary substances, and reliably prevent pests that travel on foot from reaching trees.

Funnel and its varieties

Frankly, catching belts for apple trees and other trees are effective in only three varieties: funnel-shaped, in the form of a double-bell funnel, and adhesive. The first type of trap is the easiest to implement. To arrange them, just take cardboard or thick paper and roll the material around the trunk in the form of a funnel, securing it with soft wire or rope in the middle. The bottom should be a bell, and the top should be wrapped in several turns, very tightly. It would be nice to cover up the gaps on top with something - clay or. Such trapping belts for apple trees have proven to be most effective, because these trees often suffer greatly from And this pest is stopped almost completely in such “traps”.

To increase the degree of impact, the paper material is pre-impregnated with insecticides, and the catching belts are also regularly checked (they are intended for apple trees or for other bugs and caterpillars, they are shaken out into the fire.

Double-sided funnel

It is used in cases where it is too uneven, for example, at the place of tying there is a “stump” from a branch that was once removed. In this case, there is no guarantee that the insulating material fits tightly enough to the barrel along its entire diameter. The principle by which such trapping belts for apple trees are arranged remains the same, only the bandaging is done twice, and between them there remains a gap in which the pests that managed to overcome the first obstacle die. An analogue of such a trap can be considered old ones tied to the trunk several times at a short distance from each other. Quite a successful engineering move: the stockings stretch well, so they fit closely to the bark, but at the same time they do not put pressure on the trunk. Removing them is also not a problem - I cut them and they fell to the ground. And for such belts to be effective, the harness must again be impregnated. The method of wrapping the trunks with glass wool is also not bad: it is irresistible to caterpillars with their vulnerable bodies. If you need trapping belts against ants, then such traps are not justified, because these insects will be able to overcome them.

Glue to the rescue

In some ways, the method is similar to stocking “barriers”. True, the fabric must be chosen with a more porous surface that could hold drops of glue that does not dry out for a long time. A strip of such material is wrapped around the barrel, and a sticky composition is applied to it. Most gardeners use glue designed to fight rats and mice. The plus is that such hunting belts against ants help just wonderfully, but at the same time they also fall into their “greedy hands”. beneficial insects- the same bees, ladybugs, bumblebees and wasps. And the owner of the land may accidentally stick to his trap.

How to make a universal “trap”

It is worth paying close and constant attention to this method of combating garden “predators”, since making a hunting belt is very easy and does not require any expense. There is an option that has long been recognized by gardeners - to make a trap from a sheet of rubber with a kind of reservoir. The leaf is taken not very thick, but soft, folded into a funnel (double-sided) around the trunk and firmly glued together. The resulting upper funnel is filled with regular vegetable oil, mixed with a decoction made from the leaves of the tree on which the trap is attached. If the pests manage to overcome the lower barrier, they end up in the upper one, from where they can no longer get out. An additional bonus is that there is no need to change such a belt as the tree grows - the rubber gently and gradually stretches to required diameter. But the oil will have to be changed.

How to be more efficient

First of all, don’t forget: even glue that doesn’t dry for a long time will do it at some point. So either its layer will have to be updated, or go to additional tricks. In order not to destroy beneficial flying insects on your site, it is worth strengthening a “visor” over the hunting belt, for example, from a plastic bottle. Then only pests will fall into the trap. And don't trust advertising! Specialized stores often sell ready-made glues - hunting belts, on which it is written that the composition is applied directly to the bark. Never! The trunk will get burned, and you will at least spend a long time treating the tree. First, wrap the barrel with cooking paper, and then spread trapping glue on it.

Victory over pests!