You don't need to have any special knowledge to understand how the watch mechanism works. Probably in every home there is an old Chinese clock with a still working mechanism. It may be useful to you when creating original wall clocks with your own hands. In the human understanding, watches have a certain mystical power. After all, they have a special function - to be a time manager.
Creation of watches with my own hands Any housewife can do it. She may only need a little imagination and a certain amount of time to create this decorative element. As a result, such a clock will be an attractive place in your interior. We must assume that anything can serve as a dial. The most important thing is that such watches must be original and beautiful.
One of the creation options could be a round board, which previously served as a cable reel. In this case, the designer, not paying attention to the main purpose of the coil, saw the stenciled inscriptions and the hole in the middle as the basis for the dial of a homemade watch. If you are designing a travel agency office or a room with a geographic focus special option To create a clock you will use halves of a globe. Such a clock will take up quite a bit of space on the wall, but in any case it’s worth it. In the kitchen, you can use a version of a clock with buttons to replace the numbers on the dial. Such a watch will create the effect of a grandmother’s chest with old things. A ball clock will be complex, but quite unusual. Here you need to take a bright ball and a curved arrow as a basis. A similar wall clock will look like real car time from science fiction films. To create a clock-painting, you will need to take any painting you like and adapt it so that it shows the time.
The strict style of the living room or office will suit the option of a clock decorated with chessboard. In this case, elegance, rigor and precision in the room are guaranteed to you. Use wood as the base of your homemade clock, and you can use thin branches as hands. The result is a natural and environmentally friendly version of a wall clock. Music lovers and music lovers have a right to life with figures cut out of old, unnecessary gramophone records. It will be very creative design hours. If you do decide to hang a clock, then make sure that it will be visible from anywhere in the room, and you will always know what time it is at the moment.
It's no secret that the easiest way to transform the interior of a room is to add stylish accessory. While puzzling over what it could be, think about the solution of how to make a watch with your own hands.
Why watches?
What to collect from?
Simple DIY watch master classes
DIY old clock new way
DIY New Year's watch
Conclusion
Photo gallery - DIY watches
This piece of furniture will be appropriate in a room for any purpose. Moreover, you don’t need to be a genius to create it. Just the desire to work is quite enough, but interesting master We will try to suggest you classes on assembling watches with your own hands and non-trivial ideas for their design.
Why watches?
Let's start with the fact that making watches with your own hands does not have to be working. They can be given a clean decorative role. But even in this incarnation they will not cease to be a mystical object, carrying the mysterious energy of the invisible all-pervading Time. It can fly or drag, make a person happy or sad, and constantly requires monitoring its progress. Isn’t this the best reason to make a watch with your own hands, not just a chronometer that monotonously counts down minutes, but a real highlight of the interior?
Decorative clocks will become the highlight of any interior
What to collect from?
“You can use a lot of different things and materials to make watches with your own hands”
Look at the photos of watches assembled by craftsmen with their own hands, and you will understand that you can really make an accessory out of anything you can get your hands on! Creative thought, especially when it has already been given a direction, will generate incredibly fruitful projects.
Someone will see the dial of a future masterpiece in a wooden lid cable reel, someone in old record, and someone will even think of allocating a wall surface under it.
Original watch from an old record
You can assemble a magnificent wall clock with your own hands from halves of a globe. Although such a project will require a lot of space, it will look amazing in the interior. Such chronometric compositions are very relevant for design trends with a geographical bias. You can make a geographical clock in decoupage style or use parts of ready-made globes. This accessory carries with it the spirit of wandering, so it can be safely added to the decor of tourist offices or used in the decoration of travelers’ homes.
Globe watches for design destinations with a geographic focus
To decorate the hall and hall, try creating a picture clock with your own hands. The dial subject can be either a portrait or an original printed fabric framed.
Painting clock in the living room interior
Of interest among the photos of watches assembled with your own hands is kitchen model chronometer, the basis of which was tin. Here, such an abstract part of the watch as the mechanism spring is put on display.
It's fashionable to make a watch with your own hands from a tin can
A cardboard clock decorated to look like a chessboard is very suitable for an office and library.
In principle, you can use a lot of different things and materials to make watches with your own hands. You can use:
- paper;
- gramophone records;
- computer disks;
- tree cuts;
- dishes;
- glass, etc.
A clock made from a plate is ideal for kitchen decor
Whatever you decide on, the result will be worthy of attention in any case.
Simple DIY watch master classes
Model "Handicraft"
To create this watch you will need decorative buttons and a regular embroidery hoop. The dial will be fabric, the color and print of which matches room design. In addition, prepare:
- tape;
- a piece of cardboard;
- internal mechanism from old walkers.
Now let's see how to make such a watch with your own hands.
The process is intuitive. We stretch the fabric onto the hoop, cut off the excess and sew buttons to the resulting base so that they imitate the location of the numbers on the dial.
Sew buttons onto fabric
Now we need to prepare the substrate. We will cut it out of cardboard for our clock. The part must have a hoop diameter and be inserted with inside. Its strength is enough to hold the hands and the mechanism itself. For reliability, the insert can be glued to the fabric. All that remains is to attach a loop and hang the accessory on the wall.
Attach the clock mechanism
This technology is often used to assemble themed watches, for example, New Year's ones. To emphasize their connection to the event, it is enough to add adequate decor in the form of: serpentine, golden cones, improvised snowdrifts. It will be easy to change the topic if desired. The ability to change the design of the accessory will allow you to play with the perception of the environment of the entire surrounding space, which will greatly appeal to fans of frequent changes of scenery.
DIY watch made from a hoop
Paper clock
You can assemble wonderful colorful wall clocks with your own hands from magazine and newspaper sheets. Cooking:
- pencil;
- scissors;
- silk thread;
- transparent adhesive tape;
- igloo;
- cardboard;
- 24 magazine sheets of identical format;
- a pair of transparent plastic disks.
The latter can be found in CD packaging.
There are different master classes for making paper watches with your own hands, but in our case we will twist paper blanks. To do this, we wrap a magazine sheet around a pencil and get a tube. To ensure that the workpiece retains its shape, we fix the free edge with adhesive tape.
Roll up paper blanks
When all 24 parts are ready, each of them will need to be bent, thus separating 1/3 of the length.
We will sew the tubes along this fold, collecting them into a ring.
Gather the tubes into a ring
Carefully lay out the sewn paper watch blanks on the table and place a transparent disc on top. This must be done so that the central holes of the elements coincide.
Insert and assemble the clock mechanism
We insert and assemble the clock mechanism. On the back side we will hide it under a second plastic disk and a similar shaped cardboard base. Now screw on the arrows - and you're done!
Finished watches from magazines
Cardboard clock
You can make them simple, in a flat projection, or you can work a little and assemble a real imitation of walkers. This DIY watch craft is quickly assembled from boxes. The case will need a rectangular packaging box, perhaps even a shoe box. Everything here will depend on what size you plan to make the product.
Example of a clock from a cardboard box
The first thing we will do is attach two ribbons to the bottom of the box. Then we will hang cones on them. Assembling the clock from cardboard will continue to work on the dial. We cut it out using a stencil and attach it to the front side of the craft.
Now let's take care of the roof. We assemble its design from two thin boxes and two triangular pieces of cardboard.
Decoration ideas will be suggested by photos of hand-made watches, which you can unlimited quantity find it on the Internet.
Bicycle wheel
A clock made of cardboard, a clock made of paper... What do you think of the idea of a clock made from a bicycle wheel? Since the base is quite large, you will need to find an appropriately sized clock mechanism that can rotate large hands. Working on wall clock with our own hands, we will take ordinary school rulers. Let's give them the required length. We attach triangles to the ends, symbolizing an arrow. Moving elements should be clearly visible against the background of the disk, so if the design of the product allows, the arrows can be painted in a suitable color.
Attach the tin lid
There is one trick to creating such watches with your own hands. To balance the movement of the hands, a counterweight will need to be attached to the larger one. Its role is usually played by washers. This makes it easier to select an adequate mass.
DIY watch made from a bicycle wheel
Clock in decoupage style
Decoupage technique is more popular today than ever. It is used in the decoration of a wide variety of things. It allows you to create a real exclusive. In this way, you can restore an old watch in a new way or refinish one that is just about to be born.
Clock decor using decoupage technique
The technique of decoupaging a wall clock with your own hands is not too complicated. She is rather demanding in detail, so new handmade can be considered a completely acceptable hobby for beginning designers. In a similar way, you can decorate clocks made of cardboard, gramophone records, and wood. For pasting the base, you should choose a pattern that you personally like and does not dislike the interior style.
Clocks made using decoupage technique should be in harmony with the style of the interior
Do-it-yourself old watches in a new way
If we discard the decoupage technique, then we can restore watches that have lost their attractiveness or do not fit into the interior in a completely ordinary way, accessible to every needlewoman. Try dressing them up in fun knitted clothes.
Update your watch with knitted decor
An unusual solution will help you create a New Year's watch with your own hands. If in the ordinary everyday version the products are simply tied around the perimeter, then in honor of the celebration they are put on hats and scarves in the spirit of Santa Claus.
DIY New Year's watch
Preparing for this holiday is a separate topic. This is a whole section of master classes on creating watches with your own hands. And why all? Yes, because at this time a watch can be not only a home decoration, but also a wonderful gift for loved ones. Cheap? Yes! But exclusive and memorable!
Clock from disk
A stunning looking watch model will be made from the disc. Everything is standard here with regard to the mechanism fastening part. It is placed in the center, but the peripheral design can be the most enchanting. There you can glue snowflakes, make a snow frame, etc.
Don’t be lazy to make a clock for the Christmas tree with your own hands. Here you can do without any special frills and simply paint the disc with a marker.
DIY CD clock
If you want to try out your imagination, try imagining a clock made from disks in more complex design. Glue them together or otherwise combine them into intricate compositions.
Styrofoam clock
Working with pliable material will be difficult even in the hands of beginners. Find clock crafts in the photo and try to assemble them with your own hands. Cut out the blank into the shape you like and cover it with fabric or paint it with paints. All that remains is to give the product a festive mood. Decorate it with shiny tinsel and other New Year's paraphernalia.
Even beginners can make a clock out of foam plastic.
Dough clock
Also not too the hard way do New Year's clock with your own hands. As you work you will need to knead salty dough and bake figures in the shape of Christmas trees, stars, and snowflakes from it. The main emphasis when conducting master classes on baking watches with your own hands is on kneading the dough, since the success of the enterprise as a whole depends on its quality.
Required ingredients for salt dough
After kneading 250 ml of water, 250 g of salt and 0.5 kg of flour, immediately begin to form a shaped base. For beginners, it is better to cut out clock crafts with your own hands from rolled out dough. Those who already have some experience can try assembling a watch case from small parts. Next, the workpiece is sent to dry in the oven. The work will be completed by painting and decorating the result.
DIY bright clock made from salt dough
Advice. Do not add to the dough vegetable oil even in small quantities. Its elasticity may improve, but its quality will sharply decrease. Crafts made from it will crumble.
Food grade plastic watch
Wonderful DIY watch on New Year can be assembled from a plastic box that served as packaging for a cake or other goodies. Place colored rain inside the box, maybe mixed with small toys. Cut out the numbers and hands for the dial from bright paper and stick them on the front side of the product. Mold out of plasticine or cut out blanks for cones from foam plastic and wrap them in shiny foil. Hang the decor to the finished craft and additionally wrap its body with fluffy rain. DIY decorative New Year's wall clock is ready!
New Year's watch made of food plastic
How to decorate a New Year's watch?
“When making a New Year’s clock with your own hands, it would be nonsense to forget about coniferous branches”
In addition to all kinds of tinsel and toys, it is recommended to attach real cones, scatterings or bunches of berries, and bows to crafts. Imitations of snow are welcome. It can be drawn, sprayed with a toothbrush and paint, or applied with applique. Naturally, when making a New Year's clock with your own hands, it would be nonsense to forget about coniferous branches. However, live options are not always suitable. For example, they simply cannot stay on a paper watch due to their weight, so in such a situation you will have to use their artificial counterparts.
DIY New Year's watch
Conclusion
We can talk about how to make a watch with our own hands all day long. This is a direction so rich in ideas that it seems simply unrealistic to exhaust this well. Try to immerse yourself at least once in the mysteries of creating a masterpiece, and maybe exciting activity will become your hobby.
Photo gallery - DIY watches
Stylish wall clocks can improve the design of any room. They can be made or decorated with your own hands. This type of work can be done by anyone and takes minimal time. You can assemble an original chronometer from scratch using vinyl records, plywood sheets and even bicycle wheels. The background of the base can be knitted from threads, woven from newspapers or magazines, or assembled from cutlery. A simple printout of cool prints will help make your work much easier. Paper bases can be made from flat strips or from three-dimensional figures. The new product is suitable for hanging in the living room, bedroom, office. Each of non-standard options Chronometers need to be supplemented with high-quality mechanisms. So, ready product will serve its owners for a long time and will always show the time accurately.
Made of wood
Unusual and stylish models are made from natural wood. The mechanisms are installed on a cut log, pre-treated with stain or varnish. Boards are also used as a base: they are connected close to each other, then sawn in the form of a circle, square or oval. Modern craftsmen make products from plywood, cutting it in the form geometric shapes. This material is also used for assembling multi-level models: steam locomotives, cars, airplanes. Individual Roman or Arabic numerals. No less interesting are models that have a piece of wood at their base. Installed on top of it metal carcass in the form of a circle or a hollow square. In such products, the mechanism is installed in the center of the wood. You can also assemble a timepiece in the shape of a cuckoo house for your home using wooden sticks and twigs.
From vinyl records
Regular vinyl record can be decorated in an unusual way using beautiful pictures. Decoupage of the surface should be carried out after thoroughly treating the base with the finest sandpaper. This will allow you to remove remaining stickers and level the surface of the record. Using a drill or jigsaw, the plates can be cut out according to prepared silhouettes (teapots, cups, hearts, superhero icons, animal outlines). And having taken advantage with the following instructions, you will be able to make “flowing” clock mechanisms from the paintings of Salvador Dali:
- Place the plate in the oven for 2 minutes (temperature about 180 degrees).
- Place the heated plate on the board. Start stretching and bending the vinyl (leave the central part flat).
- Install the chronometer mechanism.
Decor with plastic spoons
A round or oval mechanism can be decorated in the shape of a flower using plastic spoons. To do this, you just need to make a stylish frame. It comes together very quickly and allows you to update it in an original way. old model. The following master class will tell you how to do this step-by-step:
- Cut a circle from plywood sheet with a side thickness of 5-8 cm. Its central part should fit the size of the mechanism being updated.
- Cut off the handles of plastic spoons (you will need at least 250 spoons).
- Cover the plywood circle with spoons, placing them with their cut tails towards the middle. It is better to glue products using a silicone glue gun.
- Prepare a central part from foam plastic on which the mechanism will be located. Glue the foam to the circle with the petals, prepare a recess for installing the finished mechanism.
- Paint the prepared base (or leave it unchanged). Install the mechanism.
Important to remember! Color plastic spoons need to special paint. It should lie evenly even on a smooth surface.
For kitchen
To make your kitchen look unusual and cool, you can remodel the chronometer using various improvised means. Housewives can make an elegant frame from coffee beans. They should be glued with a silicone gun or thick transparent glue. Cool and funny models are obtained by pasting them with cutlery. But for rooms decorated in blue or blue-white tones, it is recommended to make nautical decor any watch with your own hands. To create it you will need different pebbles and shells. They should be glued to the bottom of the base or a new indexing should be made from them. It is better to make the edging of the mechanism from a thick cord. If desired, the rope can be laid out in waves or supplemented with neat knots. Such original watch You can style any dining room.
From cutlery
You can decorate mechanisms in an unusual way not only using improvised means, but also kitchen appliances. Forks and spoons are suitable for the job. They will be glued to the base from the back. The density of the devices is selected individually. But to make the model more original, it is better to glue them as close to each other as possible. And you can arrange them as an unusual indexing. For maximum styling of the new product, it is recommended to attach shallow soup bowls or spatulas as the main indexing elements. The color of the selected cutlery should match the background of the base. If necessary, the devices used and the base are painted in the same tone. For this paint will do for metal in a can.
Saucers and cups
You can brightly and elegantly decorate your chronometer using a set of cups and saucers. They don't have to have the same design. The most eye-catching items will be those created using cups and plates of different types and colors. Making the model is quite easy. The work will take no more than 1 hour and is carried out according to the following instructions:
- A large circle base is cut out of a plywood sheet. A hole is cut out in its center to install a mechanism with arrows.
- The plywood circle is coated with paint.
- When the paint is dry, indexing marks are placed.
- The saucers are glued to the marks with silicone glue.
- After 20 minutes, the cups are glued to the saucers.
Textile
The use of textiles to cover the base of the chronometer is justified by the variety of fabrics with colorful patterns and amazing structure. You can use cotton, linen, satin, burlap, jacquard, organza. Volumetric elements are easily glued to such fabrics. For example, polymer figurines or clay figurines, pieces of wood.
The fabric used can be pre-embroidered with acrylic threads, satin ribbons or beads. Sewing on multi-colored sequins or large beads will help highlight the indexing. Such bases also go well with self-adhesive rhinestones. You can frame fabrics with trim, jute thread, bright soutache or thick cords. The frame should be selected based on the structure of the fabric, its color, and style.
Hoop and fabric
Fabric decorated with embroidery will perfectly highlight the originality of the created dial. Simple cotton fabrics or canvas are used for work. The preparation of the base is carried out according to the following instructions:
- embroidery of fabric (left in the center free place for threading the pin under the arrows);
- fixing the fabric on the hoop, trimming protruding edges;
- cutting a hole for the arrow pin in the center, treating the edges with glue;
- installation of the mechanism, arrows;
- Attaching plexiglass to the hoop with digital indexing.
The presence of plexiglass protection is mandatory. Its absence will lead to the accumulation of dust in the fabric structure. Because of this, the embroidery will soon darken and to wash it you will have to completely disassemble the mechanism.
Jute thread, etc.
Stylish watch designs can be made using thick threads. Imitation twigs can be easily made from jute. To do this, the threads are immersed in PVA and then ornate patterns with weaves are laid out from them. It is recommended to supplement the frozen “branches” with beads and rhinestones. At home, you can make a braided voluminous cord from leather, which will act as an extraordinary frame for the chronometer.
A piece of burlap will help completely change the look of the product. It is simply tucked under the mechanism, and on top is supplemented with voluminous plastic figures, wooden beads. You can also make a fashionable backdrop yourself from a canvas belt. Its pieces are glued under the arrows in stripes and diamond shapes. Other weaves of thin straps are also allowed.
Wicker and knitted dial
An interesting option for decorating the mechanism would be knitting the warp. The work can be carried out by analogy with the manufacture of potholders and napkins. The finished fabric can be dense or openwork. The color scheme and patterns on the knitted fabric are selected individually. They must match the color of the hands and the chronometer itself. It is recommended to starch or coat openwork fabrics with glue to maintain their shape. The product should be dried on a flat surface. It is not necessary to use a web press. It is better to fix it after applying glue or starch with pins: this way you can stretch it evenly knitted fabric. Stylization of canvases is usually carried out by using threads of different colors. They are suitable for weaving macrame with patterns and simple images.
From old newspapers and magazines
Simple and original crafts for chronometers. If you roll individual sheets into a thin tube and fix the end with glue, they will turn into an artificial vine. It can be woven into an original frame in the form of a circle or square. Decorating chronometers from magazines is done by creating separate circles, glued together into patterns. This work at home is carried out as follows:
- Sheets of magazines are cut into strips 1-2 cm thick.
- Each strip is rolled into a tube in a spiral, then pressed along its entire length to secure the folds.
- Circles are rolled from prepared flat “tubes” different diameters. The ends are fixed with glue.
- Bright circles from magazine sheets are glued together, forming a catchy figure or an abstraction base.
Quilling
The use of ready-made paper strips greatly simplifies the creation of non-standard backgrounds. They turn out to be voluminous, which must be taken into account when fixing them under the arrows. You can arrange patterns collected from quilling instead of the usual indexing. But small paper figures (flowers, leaves, animals) can be placed outside the base. So they are going to original frames. But most interesting option when using paper strips is the creation of full-fledged paintings. For example, silhouettes of people, animals, images are made from them musical instruments. It is allowed to produce landscapes and city views. Such paper pictures need to be glued to a plywood base, leaving a place in the center for installing the chronometer mechanism.
Beautiful wall clocks are always a source of information about time, but they also decorate the apartment interior and give it a special charm.
Moreover, if you think that it is very difficult to make a wall clock with your own hands, then you are deeply mistaken. This is a very real task that almost everyone can do. After all, for such a watch you do not need to assemble the mechanism itself.
It is taken from old watches or taken out of cheap Chinese alarm clocks. And on this basis, you decorate them to your taste, taking into account the design of your apartment.What are wall clocks made of?
If you decide to make wall hangings yourself or make Grandfather Clock with your own hands, you need to know that this can be done from almost any material. Of course, the most popular is wood. Due to its properties, wooden watches are made by ourselves. different shapes and last quite a long time.
Usually, not only wall clocks, but also grandfather clocks are made from this material. By the way, drawings for the manufacture of wall clocks are usually not required, but they may sometimes be needed for floor structures that have a more complex assembly.
Record clock
Plastic and other materials
Plastic watches are also popular. They are even more durable, but their production is more complex. An original watch can be made from cardboard, and the simplicity with which this can be done is surprising. As a material for a wall clock, you can use paper or, for example, gramophone records.
Note!
It’s quite possible to make a clock for the kitchen from a tin can.
There is a great variety of additional material, used mainly for making arrows. These could be tree branches, buttons, pencils or wire.
Cardboard clock
As we have already said, making cardboard clocks is quite simple, so we will now tell you how to make a clock from cardboard yourself. In order to implement this idea we will need following materials and tools:
- Clockwork. It can be pulled out of an old unnecessary watch.
- A piece of corrugated cardboard. Its dimensions depend on the dimensions of your future product.
- Wooden disk.
- , PVA glue, kraft paper (special high-strength wrapping paper).
- (fine-grained and possibly coarse-grained), hook, decorative elements.
Paper clock
Main stages of execution
First you need to take a disk made of wood (the same goes for wooden clock), and use a hammer drill to make a hole for the clock mechanism. After this, we cut out two circles from cardboard and glue them on both sides and in one of them we also make a hole for the clock mechanism.
Having made the base for the clock, you need to cover the ends of the disk with cardboard, cutting out a piece with a width equal to the thickness of the disk and a length equal to its circumference. We fix it with PVA glue. Then you need to cover the clock with kraft paper and, on the reverse side, fix the hook with which we will hang our product on a nail. By the way, a master class on watch making can be viewed below.
Final work
Now we need to paint our disk black. It will be enough to do this from the front side. After the surface has dried, we make a hole for the arrows using an awl. Now we need silver paint, which contrasts as best as possible with the black color of the disk, and use it to apply the divisions and numbers on the dial. We paint the arrows with the same color. We finish our work by installing the clock mechanism and decorative decoration ends and edges of the disk.
Note!
This can be done, for example, using rhinestones.
As you can see from the instructions presented, almost anyone can make a watch from cardboard.
Wood clock
Let's look at how quickly you can make a wooden clock. To make them you will need the following materials and tools:
- Wooden disk with a diameter of 330 mm.
- Wooden sticks and balls of small diameter in the amount of 12 pieces.
- Clockwork.
- Sandpaper, glue, .
- Wire cutters and hammer drill.
- Black cardboard and paint in two colors.
- Pencil, scissors, ruler.
Step-by-step instruction
- Sand the disc and balls until they have a smooth surface and wipe them free of dust.
- We cut the wooden sticks to the same length. We choose the length ourselves.
- Using a punch, we will make a hole in the center of the disk intended for the arrows.
- Drill 12 holes at the end of the wooden disk. They will serve as grooves for sticks with balls. The distance between the disks must be the same. To do this, you need to use a protractor and make marks every thirty degrees.
- Pour glue into the holes and fix wooden sticks in them.
- At this stage of making a wooden watch, you need to treat the surface with a primer and, after drying, apply several layers of paint. The paint color, in our case, should be white.
- Now we need to paint the balls red (it is most suitable for a white disk). To make this convenient, we will need a piece of foam plastic and the remains of our wooden sticks. We string balls onto them and paint them, after which we insert them into a piece of foam plastic and wait for them to dry. For painting we use a spray, since it is unlikely that it will be possible to paint evenly with a brush.
- After drying, insert the balls into sticks and “sit” them on the glue.
- The final step will be to install the clock mechanism on the back of the disc and fix the hands to it. We will make the arrows from thick cardboard, painted black.
This is interesting! do it yourself - master class
Paper clock
In order to make a clock out of paper we will need the following materials:
- Clock mechanism and hands.
- The dial is made of wood or other dense material.
- Paper for decoration and buttons.
- Decoupage glue (acts as glue, varnish and sealant), regular glue, paints.
- Small paper plate.
- Ruler, scissors, pencil, pen.
- Brush and foam brush.
Plastic watch
Manufacturing stages
Let's look at how to make a watch with your own hands step by step.
- First, we cut the paper (choose the color that suits you), in the shape of an elongated trapezoid, along the length of the dial. In this case, all pieces must be the same in size and shape. total area The paper should be larger than the dial so that you can bend the ends later. Then we fix the paper to the dial with decoupage glue and wait for it to dry. After this we bend and glue the hanging ends to back side dial.
- Apply decoupage glue to the surface of the dial in several layers. Each subsequent layer is applied to the previous one, but after complete drying. At correct application, the surface of the dial will become glossy.
- We mark the dial. This is conveniently done using a paper plate. That is, first we mark all the dots on the plate, then we apply it to the dial and put the dots on it. After that, in place of the numbers, we glue, for example, buttons or something else that your imagination is designed for.
- The final stage will be coloring the arrows in desired color, most suitable to the design of the watch made, and connecting them to the clock mechanism. At this point the work will be completed and you will receive the watch original design own production.
DIY wall clock video:
In contact with
See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?
Would you like to suggest photos on the topic for publication?
Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!
