Aluminum entrance gates ads400 Alutech. Sliding gates Alutech ADS400 - review

In the ADS400 series format, Alutech offers high-quality sliding gates that can emphasize the presentability of any country house. After all, the ADS400 gate emphasizes the good taste of the home owners, while simultaneously ensuring a streamlined entry and exit procedure. In short, any gate from the ADS400 series is a real calling card of a presentable home for a modern person.

Moreover, the assortment of the Alutech ADS400 series amazes with its breadth of assortment and rich selection of sash finishes. Moreover, Alutech guarantees that its products will last at least 15 years. And the high quality of components is the best guarantee of maintainability, both of the entire product and of individual gate elements (automation, lining, etc.).

Therefore, the ADS400 series can be used not only in everyday life, but also in barriers of commercial or industrial facilities.

What's the benefit? Five advantages of sliding gates from Alutech

Firstly, Alutech ADS400 gates are lined with twenty types of filling materials, which include 45mm heat-resistant panels, conventional corrugated metal sheets, and wooden boards. Therefore, the appearance of the ADS400 gate will fit into the exterior of any enclosing structure.

Secondly, the ADS400 gate is made from an aluminum profile, which, in turn, is covered with a special polymer protector. Therefore, Alutech gates are not afraid of either precipitation or structural corrosion. And the service life of such products is measured in decades.

Thirdly, the frame of the Alutech ADS400 gate is made from a profile with a cross-section of 96x117 millimeters, which is reinforced with internal and external stiffeners. Therefore, sliding gates from this company are distinguished not only by their corrosion resistance. But also the overall rigidity of the structure. However, the sash itself weighs much less than its steel counterpart, with almost the same strength of the leaf.

Fourthly, the mechanics of the Alutech ADS400 gate are designed for at least 25,000 access cycles. Therefore, replacement of worn-out components, under domestic operating conditions (about four throughput cycles daily), can be planned no more than once every 15 years.

Fifthly, the Alutech ADS400 gate operates almost silently. After all, the support rollers of lightweight aluminum gates are made of glass fiber reinforced polyamide, and the rack is made of nylon. Therefore, the throughput cycle of Alutech products will not disturb even the most sensitive sleep of your household or neighbors.

You can also replace the gate lining by replacing the corrugated sheet with wood sheathing or a SIP panel, even without dismantling the gates.

Design of sliding gates Alutech ADS400

Alutech sliding gates consist of three main elements:

• A canvas frame filled with lining.
• The supporting part, consisting of a pair of supporting pillars with rollers and braces supporting the pillars. Moreover, the entire supporting part is attached to its own base.
• Gate mechanics, consisting of a motor and a gear mechanism (gear and rack), providing automation of the access cycle.

The catchers of such gates are mounted directly on the supporting post of the fence, and the bolt is secured in the area of ​​the supporting part.

Alutech ADS400 gate lining

As a frame lining, Alutech offers more than 20 types of “fillers”, both internal and overlay. Moreover, all “fillers”, to one degree or another, belong to the following types of lining:

• A sandwich panel is a multilayer product consisting of two strips of sheet metal, between which a layer of polyurethane foam is placed. Moreover, the outer part of the panel can copy both the color and texture of natural wood. This is the most presentable sewing option.
• Corrugated profile rolled onto sheet metal using special rollers. This lining increases the strength of the gate.
• Aluminum profile produced by extrusion. Moreover, the width of such a profile can be very different. This is the fastest lining option, which can be changed by choosing a different color or texture on the surface of the profile, literally in one day.

The Alutech gate frame can also be sheathed with regular wood.

Gate mechanics Alutech ADS400

The design of sliding gates from Alutech uses automatic equipment from the AN-Motors and Nice brands. Therefore, the Belarusian manufacturer offers customers a product of essentially European quality. After all, the Nice and AN-Motors brands guarantee stable operation for at least 25 thousand gate opening and closing cycles.

In addition, the Alutech ADS400 gate can be equipped with an automatic drive control unit (based on photocells) or a remote control, which allows you to “open” the gate without leaving your home or car.

Cost of sliding gates Alutech ADS400

Like any quality item, the Alutech ADS400 gate will not be cheap for its future owner. A canvas with dimensions of 3.5x2 meters (width and height) will cost 1,100 euros, and for a gate measuring 4.5x2 meters you will have to pay 1.5 thousand euros. And this is without stitching!

At the same time, a gate cut into the canvas either at the factory or “on site” will cost 400-450 euros. And for installing the gate, the future owner will be charged from 8 to 15 thousand rubles.

However, taking into account guaranteed problem-free operation for at least 15 years, this price does not seem so high.

Automatic sliding gates are convenient. No need to get out of the car in the rain and snow, no need to waste time and effort pulling away the rusted sash. I opened the window, pressed a button on the remote control and off we went. There is only one problem - it's expensive. However, not always.

The Alutech company is known primarily as a manufacturer of automatic gates, automatic roller shutters and other technological products made from aluminum profiles. Among other things, its range includes automatic sliding gates ADS400. Let's talk about them.

Design

The main element of the gate - the leaf - is a frame made of aluminum profiles on which the filling is fixed. The filling can be different - from cheap plywood to quite expensive sandwich panels. The canvas moves using roller supports, which are installed on the foundation. Of course, there is an electric drive and automatic control. In addition, if necessary, the gate can be easily rolled back manually. In general terms - that's all. The details remain.

Filling options

Supposedly more than 20. In fact, there are 3 main ones:

• sandwich panels;
• extruded aluminum profiles;
• roller rolling profiles.

All these profiles may differ in color, width and height. In addition, at the request of the client, Alutech can attach even a sheet to the frame. It is not clear who needs it - the cost of the finished structure will change slightly.

Sandwich panels

The thickness of the sandwich panels is 45 mm. Inside there is foamed polyurethane with a density of approximately 46 kg/m. This is a good heat insulator, but in this case its other function is important - increasing the rigidity and strength of the panel.

All gaps between the individual lamellas are closed with EPDM seals, and between the glazing bead and the sandwich panel there is a FRK12 seal. Also a small thing, but such little things demonstrate an attitude towards quality. This is precisely why Alutech gates are valued.

Roller Rolled Aluminum Profiles

The profiles are made of aluminum tape, with polyurethane foam inside for rigidity and geometric stability. The profiles are coated with paint based on polyurethane modified with polyamide. Polyurethane makes the coating elastic and resistant to changes in humidity and temperature, and polyamide increases wear resistance. According to the manufacturer, the quality of the coating is confirmed by test reports from BASF Coating (Germany) and AkzoNobel (Sweden).

Aluminum extruded profiles

Alutech offers profiles with thicknesses of 37, 82 and 87 mm. It is not necessary to use the same type of profiles - you can use elements of different lengths, thicknesses and colors to achieve the desired gate design.

Gate

In addition to the gates themselves, Alutech also offers a gate that can be installed next to them. This is a good option if you often get in and out on foot - it’s faster and the mechanism wears out slower.

The gate can be:

• built-in with opening to the street;
• built-in with opening to the courtyard;
• invoice with opening to the yard.

Hinges can be hung on the left or right.

Wicket design

1. The frame elements are made of aluminum profile - it is lighter than steel and is not subject to corrosion.
2. To fill the canvas, sandwich panels, aluminum profiles of various types or any sheet material can be used.
3. The delivery set includes fittings, including a handle. At a minimum, the hinges are of very high quality - they are made by the Italian company Fapim.
4. The filling elements are fixed with hidden fasteners.
5. There is an additional groove in the gate strike plate. You can install an electric latch in it (purchased separately).

Advantages of sliding gates Alutech ADS400

Frame made of aluminum profiles with polymer coating

Aluminum alloy does not rust, weighs less than steel and is almost as strong as steel. According to the company itself, its alloy was tested at the Institute of Powder Metallurgy (certificate No. BY/112/02/1/0/0263) and found to be of high quality.

Rigid frame

The companies did not spare the metal - the load-bearing capacity and rigidity of the frame are excellent. This will certainly come in handy during strong winds.

Great resource

The service life of the main elements of sliding gates ADS400 is 25,000 operating cycles. Based on 4 cycles per day (there are rarely more in a residential building), the gate is guaranteed to last 15 years. At production sites, their resource is used up faster. However, they probably won’t turn into powder - most likely, you’ll just need to replace the rollers.

Silent operation

The gate rollers are made of glass-filled polyurethane (a mixture of polyurethane resins and fiberglass), and the rack is made of nylon. The polymer parts of the sliding mechanism produce less noise and therefore the gate operates not exactly silently, but rather quietly.

Hidden fasteners

A canvas without protruding heads looks more attractive. It's a small thing, but nice.

Maintainability

Any element of the gate can be replaced quite quickly and with a minimum of dismantling work. Of course, replacing frame elements will have to work hard, but I can’t imagine what could be broken in it.

Additional components

The standard delivery package for Alutech ADS 400 doors does not include:

• support frame for concreting;
• supporting pillar with brace;
• toothed rack.

Disadvantages of the Alutech ADS400 gate

The ADS400 sliding gates have no significant disadvantages. The only problem is the price: as always with big brands, it bites. Thus, the minimum price that can be calculated on a calculator is 990 euros - and this was the price of sliding gates only 2 meters wide and 1.2 meters high without installation and automation. We used the cheapest aluminum profile as filling. In real life, the price of an Alutech ADS 400 gate will hardly be less than 1,500 euros. However, a quality guarantee is also worth something.

Prices for Alutech sliding aluminum gates filled with a sandwich panel are indicated without automation and additional options. installation and delivery services.

Design meets all technical loads generated during operation of sliding gates. The frame is assembled using corner joints, there are no visible fasteners throughout the gate office, this nuance gives the gate a modern style, unlike other manufacturers, the fastening of the filling is done in a proprietary way according to the principle of fastening a double-glazed window in metal-plastic windows, where the filling is inserted into the frame and snapped into place with a special profile. A distinctive feature is the lower guide beam; during production it was made together with
the profile of the frame of the structure is also made of aluminum; other manufacturers have this beam
made of steel, and the gate frame is made of aluminum, the interaction of steel and aluminum causes corrosion. That is, the technological process of competitors is obviously broken in the production of gates and cannot provide protection against rust.

Advantages that other manufacturers do not have.

-Perfect appearance without visible fasteners.

- Corrosion resistance to external factors.

- Quiet opening due to polyurethane rollers and teeth. nylon slats.

-Light weight compared to other gates due to aluminum alloy

-Maintainability due to the use of proprietary filling fasteners

-Long resource 25,000 cycles or 17 years of operation.

Minus gate

-Price (justified by the quality of the gate)

Types of Filling

Three main types of filling: sandwich panel, aluminum profile and roller shutter profile. These fillings have different modifications, colors, designs of the filling structure, as well as the possibility of placing the filling vertically or horizontally, as a result of which there are many options for styles and orientations of gate types with the ability to please every gourmet of unique design.

Gate colors

The gates are manufactured in seven colors, of which two shades are brown RAL 8014 and RAL8017, these two shades are painted brown on both sides by default, all other colors of sandwich panels will be painted white-gray on the inside. It is possible to choose wood-look filling (sandwich panel covered with lamination, wood shades golden oak, dark oak, cherry) or felt (chocolate bar structure)

Gate ADS-400

An additional option for sliding gates is a built-in or adjacent wicket. The gate is manufactured using the same technology as the gate using all identical fillings, in order to maintain a uniform façade and appearance, the fittings are of the highest quality from the Italian company Fapin.

Gate automation

For comfortable operation of the gate, it is possible to equip the gate with an automatic drive, with
the function of controlling the gate using a remote control, as well as additional elements of a signal lamp and photocells for the safety of using the gate.

Roliver company managers will help you select and calculate the most suitable gate for your opening. An estimate can be made by calling, email, or using a quote!

Technical progress is moving forward by leaps and bounds. Human consciousness also quickly adapts to changes. So, if previously entrance gates were considered a luxury item - not every average family living outside the city could afford such a purchase - today homeowners around the world appreciate the undeniable advantages of using such structures. One of these is sliding and swing gates of the ADS400 series from ALUTECH: an exclusive offer on the market of entrance structures in the CIS.

Modern ALUTECH entrance gates are gradually replacing outdated welded steel structures from the market and are becoming an increasingly popular choice for homeowners. First of all, this is due to their advantages: they have a modern and high-quality design, are easy and quick to install, and are also silent and easy to use.

“Pushing” stereotypes

ALUTECH sliding gates are the ideal solution when you need to save territory in front of your garden plot: they open moving along the fence, thereby perfectly compensating for the lack of space.

Sliding gates ALUTECH

Swing gates ALUTECH

The average price for such gates is about 1100* euros. At the same time, they will serve you for at least 15 years. Using simple arithmetic, we get only 6 euros per month. Having added to them a number of acquired advantages in terms of functionality, convenient and safe operation, original and bright design, it becomes obvious: how little quality and beauty in their physical embodiment cost!

If there are certain obstacles to the movement of the gate along the fence (for example, bushes or trees are planted close to the perimeter of the fence) and free space allows, then it is better to opt for a functional swing series. Such gates also have a number of design advantages.

• The promotional price for gates (4000×2000) mm in the basic configuration does not include installation. Please check with regional representatives of ALUTECH about the conditions and period of the promotion.

Your own designer

The design of ALUTECH entrance gates can provide many filling options - today more than 20 types of door leaf and wicket filling are available for order. Thus, sliding and swing gates ADS400 can be made of:

• sandwich panels (available for order in 5 fabric patterns, 3 wood colors),
• roller rolled profiles (available in 10 standard colors and 3 wood shades),
• extruded profile (available in 7 standard colours).

At the request of the client and in order to save money, entrance gates can be made from more economical material - profiled sheets, wooden boards or any other sheet material.

ALUTECH sliding gates filled with sandwich panels

Thus, the entrance gate will be able to harmoniously fit into any, even the most demanding, exterior.

Investing in durability

ALUTECH entrance gates are aimed at long-term and reliable operation. Hidden fastening of structural elements allows you to protect the gate from unauthorized access. The use of roller supports with rollers made of glass-filled polyamide and nylon slats ensures smooth and silent movement of the gate. Additional protection against sagging of the leaves during operation of swing gates and wickets is guaranteed by three-section overhead hinges.

All gates of the ADS400 series are equipped with high-quality fittings, which makes these designs even more durable and convenient to use.

It won't rust behind us

ALUTECH entrance gates are resistant to corrosion, mechanical stress, cracks and scratches. This is ensured by applying a high-quality paint and varnish coating on the door panels, as well as a wear-resistant polymer coating on the frame profiles. Thus, ADS400 entrance gates filled with sandwich panels or aluminum profiles retain their bright color even after prolonged exposure to sunlight or operation in regions with high humidity.

Gates that are easy to install and low maintenance

Entrance gates of the ADS400 series are supplied fully prepared for installation - complete with the required size and with holes prepared for assembly. Due to this, their installation will take very little time - no more than 4-5 hours. The modern design makes servicing ALUTECH gates simple and convenient: if damage needs to be repaired, components can be easily replaced with new ones.
So, having paid for these structures once, you will forget about the discomfort and possible problems during their maintenance for many years.

And a few more words about pleasant things...

The gates can be equipped with either manual or automatic opening: it all depends on the client’s wishes for convenience and the planned frequency of using the car for exiting and entering. You can also install a gate in the gate - an additional entrance will extend the service life of the structure. By the way, its design can be chosen in the same style as the design of the gate itself.

Well, do you still think that gates are expensive? Think again, your comfort costs much more! And they don’t skimp on themselves (and in this sense, on their peace of mind and convenience), as they say.

You can get more detailed information about products on our website or by contacting our.

Alutech sliding gates- this is a reliable new generation design, a guarantee of the safety of your family and property, an affordable solution for a private home:

• Options for every taste and budget: from economical solutions to premium segment offerings.
• Attractive appearance without visible fastening elements.
• The all-aluminum construction protects against corrosion.
• The price fully justifies the exceptional quality.
• The minimum service life is 15 years.

Product advantages

Sliding gates of the ADS400 series are an improved, impeccable design of self-supporting gates that meet the most demanding customer requirements.

• All components – from profiles to filling materials – are produced at the company’s factories. Alutech is responsible for the quality of all components and elements, confirming their reliability and safety at the modern level
• There are more than 20 door seal options to choose from:
  • solid/sparse aluminum profile,
  • sandwich panels 45 mm thick,
  • roller shutter profile AG/77,
  • corrugated sheet/corrugated sheet,
  • wooden panels.
• The strength of the structure is achieved by combining the frame profile with a universal aluminum tire profile measuring 96x177 mm.

• Minimum gate closing/opening resource - 25 thousand cycles. If we take into account that the gate will be used daily for approximately 4 times a day, such a resource corresponds 15 years of trouble-free operation. If the gate does require repair, it can be done with minimal financial and labor costs: a lot of damage or the filler can be changed repair without resorting to dismantling the structure.

• Compared to many other manufacturers, Alutech ADS400 series gates operate almost silently, which is ensured by polyamide rollers and a nylon rack.

• High resistance to corrosion is achieved due to the fact that all structural elements are made of aluminum profiles and a polymer coating is applied
• The absence of visible fasteners makes it difficult for uninvited guests to gain access to your property and makes the appearance of the gate more aesthetically attractive.
• The color of the finished gate can be either classic (white, blue, green, red, brown, dark brown, beige) or unusual: for example, silver, or the “golden oak” shade, which imitates a wooden covering, or the “dark oak” color ", "cherry".

Standard colors

Wood colors

• High-quality automation for sliding gates can be supplemented with photocells, which will be triggered when an obstacle occurs, stopping the gate from closing. Safety guarantee.

Sliding gate design

Alutech sliding gates of the ADS400 series are a self-supporting structure in which an aluminum gate frame with filling moves along roller supports installed on the foundation outside the travel area (behind the gate opening).

1. Opening pillar
2. Fence
3. Canvas
4. Upper catcher
5. Bottom catcher
6. Mounting bracket
7. Support frame
8. Supporting post with rollers
9. Additional post with rollers
10. brace
11. Engine
12. Bolt

It should be remembered that correct installation allows you to easily, manually, open and close self-supporting Alutech sliding gates.

For locking, a deadbolt is used, which is included in the basic package.

Additional equipment

The Alutech sliding gate package may additionally include:

• support frame for concreting,
• support post and brace,
• rack.

Types of sliding gate fillings

Sandwich panels

Roller rolling profiles

Aluminum extruded profiles in various widths

We offer various options for sandwich panel patterns, thanks to which sliding gates will perfectly match any finishing material. For connoisseurs of natural materials, we offer sandwich panels imitating cherry, dark or golden oak wood.

Aluminum profiles of various widths and colors allow you to implement various color schemes in the finished design of sliding gates - from classic white and brown to original colors: ruby ​​red, moss green, silver metallic, golden oak and many others.

The aluminum frame of sliding gates, including wickets, allows the installation of profiled sheets, wooden boards or any other sheet material into the structure.

Automation for sliding gates ADS400

Automation systems allow you to comfortably control the opening and closing of the door leaf using an electric drive, which is operated from a remote control.

For greater safety for the passage of people, pets, and the passage of cars, we can equip the design of sliding gates with special photocells that will control the entire process, stopping the closure of the gate if an obstacle appears in the passage.

We supply Alutech sliding gates with automation from two brands: AN-Motors and Comunello. And also other manufacturers.

Gate automation under the AN-Motors brand has a number of advantages, the main of which are:

• high reliability of mechanisms;
• optimal configuration - the set contains all the necessary elements for installation and configuration;
• convenient and simple connection;
• wide functionality of system automation taking into account your wishes;
• safety during operation;
• self-locking gearbox prevents unauthorized opening of the gate;
• an electromagnetic interference filter protects the drive from high-voltage pulsed interference and ensures compliance with electromagnetic compatibility standards;
• convenient operation in the absence of power supply;
• affordable price.