Snowman from balls and polyurethane foam. Do-it-yourself polyurethane foam figures: foam crafts Foam crafts for the new year

Crafts from polyurethane foam can be made with your own hands in just a few hours.

If you have a disposable tank that hasn't run out yet, why not use it for the benefit of landscaping.

In this case, it is still better to resort to professional foam, and not household foam, since a small gun with a diameter of 2 mm is added to it.

Unusually simple and beautiful figurines made of polyurethane foam will become the property of your site. They will not leave indifferent either neighbors or just people passing by.

Materials for fakes from polyurethane foam

You will need:

gloves;
sprayer with pre-prepared water;
polyethylene;
aviation kerosene.

Kerosene is needed so that, upon completion of work with mounting foam, hands can be easily washed from building material.

Something will also come in handy for creating the basis for crafts from polyurethane foam with your own hands.

You can take an ordinary plastic bottle, an old pan or something else, which is not a pity.

With foam covering the auxiliary material, the creation of crafts will begin ...

You need to paint them carefully, and before carrying out this procedure
dry thoroughly in the shade. Drying takes at least a week, but if the foam layer is large, it is better to wait longer.

The paint is applied to the craft from mounting foam with your own hands every spring again. If this is not done, the foam may crack and the craft will deteriorate.

Foam craft ideas

If your site has a small pond, you can make a large green toad. This is especially true where many plants grow, especially large-leaved ones. In some cases, it is easier to make a lizard or a crocodile - who can do what.

In order not to miscalculate with the sizes and “fill your hand”, you can practice on plasticine. No matter how strange it may sound, but it is after testing on this simple material that it turns out to make chic crafts from polyurethane foam.

The same goes for the dough - if you like to bake delicious buns, pat animals - this will help you figure out what you can do better.

A great solution is to make turtles out of polyurethane foam. And it is not at all necessary to have a reservoir on the site. In addition, almost everyone has white paint, and it is now cheaper than colored ones.

Turtles are easier to dye, their shells can be alternated with natural ones. If, during the creation of the craft, bumps appeared that should not be, they can be cut off with a sharp knife.

Similarly, the situation will be with rounded details - if they need to be sharpened, the excess is simply cut off.

Crafts from polyurethane foam not only decorate street views, they can also be made for the home. Funny frogs will bring smiles to people passing by!

So, as an original New Year's decor, you can make a snowman out of foam, but you need to start creating it in advance so that the material has time to dry well.

If you paint over the foam ahead of time, it will quickly crack.

Dacha is a place where we relax and enjoy life. But decorations for the garden and yard cost a lot of money. Therefore, some owners make crafts from polyurethane foam, which are in no way inferior to expensive figurines made of plastic, metal and wood.

In order to decorate your personal plot, you do not need to complete art courses and have “golden hands”. A small set of tools, a little diligence and abstract thinking will allow you to get gnomes, frogs, sheep and Christmas trees from quite affordable material.

Do-it-yourself technology for making figures from building foam

First of all, you need to stock up on the necessary materials and tools. This will determine how well and quickly the manufacturing process will go:

For the frame of the product, plastic bottles filled with sand, boards, metal objects and thick wire are suitable. Even an ordinary brick can become the basis for a future mushroom on its site!
Mounting foam.
Foam gun.
Gun cleaner.
If you plan to grow flowers in sculpture, then in the center of it you need to mount some kind of container such as a bucket, tin can or the same plastic bottle.
Varnish, paint and brushes for them.
Stationery or other knife.

The very process of creating garden figures consists of two successive processes. First, we apply foam to the base and let it harden a little. Then we apply again and so on until we approach the shape we need.

After that, extra protrusions are removed with an ordinary clerical knife, the sculpture takes on a finished shape and can be covered with paint. The whole work can take from an hour to several days, depending on the size of the figure and the thickness of the applied layer. All this is desirable to do in a separate dry room, where there is no excess dust and children do not run.. Otherwise, you will have to wash with gasoline or acetone an extremely sticky substance, which is polyurethane foam.

Sculptures and products for the garden

Below are a few examples of different figures that even a beginner can create on his site. The main thing is to strictly follow the sequence of all operations. And in a few hours you will definitely feel like a real creator, from whose hands an excellent decoration for a summer cottage comes out!

Christmas tree

Making a Christmas tree out of polyurethane foam is easy. To do this, you need to collect twigs and attach them to an iron pipe. This can be done with tape or wire.

After that, it is necessary to wet the workpiece from the spray gun so that the foam “sticks” to the base more firmly.

Acrylic green paint is great for creating a Christmas mood with simple things like stick trims, twigs, polyurethane foam and fishing line.

You will find all the information about paths from corks from plastic bottles.

Ball

The ball is the easiest figure to make. It is recommended to start your creative experiments with it, and after that move on to more complex decorations and sculptures.

We take a can of paint and fill it with sand;
Layer by layer we apply mounting foam;
Upon reaching the required size and more or less spherical shape, we remove the excess parts with a knife;
We cover the product with varnish;
We choose the paint for our decoration, depending on our preferences;
If this is a bun or the head of some animal, we make eyes, a nose and a mustache from buttons, fishing line and wire.

It is possible that the material about will be useful to you.

Ram and sheep

We make a ram and a sheep:

First, let's make a frame. We take several plastic bottles and fasten them with tape. It will turn out something like the "skeleton" of the animal. The lower "limbs" can be filled with sand to make the figure more stable.
Next, you can already apply foam. But to save it, it is better to wrap the frame with isolon or other polymeric material. The first layer of polyurethane foam - you already have a rough idea of what will happen in the end!
We make ears from pieces of skin. You can also make them from plastic bottles by preheating and bending them.
We process the muzzle with a knife, carefully giving it the necessary features.
We cover the product with varnish.
With paint we draw eyes, a mouth and other "features" of our sheep or lamb!

Scheme for making sheep.

Goat

Step by step how to make a goat:

We make a frame of thick wire, with which we wrap several plastic bottles.
As a frame for the legs (bones), it is better to take metal pipes. They can be welded to a pedestal, dug into the ground, or secured with bolts. Your figurine must endure wind and rain, so be sure to securely fasten the base.
We apply one or two layers of mounting foam.
We make horns and a tail from wooden sticks or plastic cuts and fix them.
After applying the last layer, cut off all unnecessary and wrap the product with a sickle or fishing line.
We cover the surface with a primer and paint. You can choose any color, because it is completely your creation!
We make eyes from buttons.
We place our goat next to a pond, in a clearing, in the company of other decorations, etc.

In total, this sculpture will take from one to two weeks to make, as each layer of foam must harden. As a result, from unnecessary pipes, plastic bottles, wire scraps, other "garbage" and several cylinders of mounting foam, you get an excellent decoration for your summer cottage!

What is a plastic curb for tracks will tell you.

Crafts for the New Year

Even if you don’t have anything on hand except a wire and a can of mounting foam, you can create a great decor for the New Year. Various ornaments, Christmas decorations, simple and complex figurines - all this is accessible and simple!

For example, you can make a snowflake. We take a wire of such thickness that it can be bent without effort. We make the frame of the future snowflake out of it. Gently apply one or two layers of foam. While it has not hardened, we achieve even and smooth surfaces. If something goes wrong, you can always add a little foam and cut off the protrusions with a regular clerical knife.

The Christmas ball is made even easier. Tennis ball covered with foam. After hardening, we apply a layer of paint and decorate our New Year's toy in bright and positive colors!

A simplified version of the Christmas tree is made using cardboard or isolon, wound on a rigid base in the form of a cone. Even a child can apply several layers! We level the surface, paint and put it in a prominent place.

How to make a swan from a tire is set out.

Basic rules for working with mounting foam

Shake the bottle periodically.
The ideal temperature for work is room temperature.
Mounting foam does not like direct sunlight. Therefore, it is necessary to work in the shade, and cover the finished product with paint.
The setting time of the foam will vary depending on the manufacturer, temperature and speed of operation.

Important Points

The paint with which the finished product is coated must not contain nitrocellulose. Otherwise, the mounting foam will soften and the decoration will lose its shape.
Gloves are a must. Without them, washing hands will take much more time than the process of making crafts.
Polyurethane foam is a very light material. Therefore, heavy objects must be placed inside any product made from it. It can be a jar of sand, a plastic bottle filled with water, an iron base, metal pipes fastened with wire, and other massive things.

Video: garden decor master class

This video shows a master class on how crafts are made from construction foam:

Conclusion

You can give your summer cottage beauty and originality without spending a lot of money on it. Foam crafts are easy to make, non-toxic, and come in a variety of shapes. Starting from a simple ball and ending with figures of animals, birds, gnomes and even people!

Free translation of a master class on making a snowman. .
I have only seen snow a few times in my life. This is because I live in Florida and everyone who has ever been here knows that we do not have enough of it. Or not at all. This means that I never took part in such childhood activities as sledding, snowball fights and snowman building. (Although I've been skating recently!).
This year I decided to make a melting snowman for the front patio - Christmas decor.
I needed to pick up some kind of material suitable for open areas, so I immediately rejected the idea of a papier-mâché snowman. (Although if you want to make a Christmas decoration for the room, then this method is cheaper.

I used the following materials to make a snowman, although you can substitute or exclude something. Everything I bought was from Walmart and Dollar tree.

3 balls of different sizes (large, medium, and small)
-Spray paint (I used blue, orange, and white)
-Shine
-Black buttons/pebbles (I used those sold in florist shops for decoration),
- Expanding mounting foam
- Cone (for carrots) (Used for flower arrangements)
- Red Ribbon
- Two branches for hands
- Hat (carnival)

The first step is to collect the base. If you don't want to spend an eternity scrubbing the scum off your garage floor, I suggest laying a large sheet of cardboard on the floor. Also keep in mind that the foam cannot be wiped off clothes, so put on something that you don’t mind ruining.
Start with a big sword - place it on the cardboard. It will stay in place if you attach it to the cardboard with double sided tape. Make the base of your snowman with foam. It's easier to work from the ground up when making a snowman.
You don't have to perfect everything all at once. You can return to the first layer after the foam dries. After all, it expands when it dries and the appearance of the snowman may change. After you have properly strengthened the first ball. you can move on to the other two.
Place two other balls on top of the first ball and tape them together to prevent them from moving.
Foam the joints of the balls. After the foam has dried, you can remove the tape. Or use double sided tape.

After the base has dried, you can proceed to further steps. Add some foam to the balls to create a melting snowman effect. Attach your hands. To do this, attach them with tape to the balls, and foam on top so that the tape from the tape is not visible.
If you want to flatten the foam a little, use a spatula.

And now the most fun part of the project! Snowman coloring time! Start creating. There are no clear instructions for painting with spray paint. But I can give you some tips to achieve the best result.
* Start first with dark paint, and then move on to light.
The desired white color will be quite difficult to achieve if it is covered in places with dark paint on top. Therefore, you must first cover the entire surface with dark paint, in my case it was blue. Do not allow the yellow color of the foam to show.
*Lighten the desired areas with lighter paint.
You need to cover with white paint the places that in your view should be light.
I also added some glitter. It's Christmas! Everything must glow!
I also wanted to attach a flashing LED display to the snowman with a wish for a happy new year, but I never figured out how to do it without piercing the balls.

Nose
It's just part of the cone, painted orange. I used a cool gun to attach it to the balloon.
The buttons/eyes/mouth are just black pebbles that fit the shape.
They are sold in florist shops.
Instead of pebbles for the mouth, I would use a twig. It would be more elegant.
We put a hat with a red ribbon or a bucket on the snowman and the snowman is ready.

I found an interesting site where people post their creative work. What is not there. And food and decorations and furniture. But before you find something worthwhile, you have to dig. And the site is in English. On the eve of the New Year, I found on
It includes instructions on how to create a snowman to decorate the yard for the Christmas holidays. It is not simple, not made of snow, but all-weather.
Here is my free translation of the snowman making master class. Website .
I have only seen snow a few times in my life. This is because I live in Florida and everyone who has ever been here knows that we do not have enough of it. Or not at all. This means that I never took part in such childhood activities as sledding, snowball fights and snowman building. (Although I've been skating recently!).
This year I decided to make a melting snowman for the front patio - Christmas decor.
I needed to pick up some kind of material suitable for open areas, so I immediately rejected the idea of a papier-mâché snowman. (Although if you want to make a Christmas decoration for the room, then this method is cheaper.

I used the following materials to make a snowman, although you can substitute or exclude something. Everything I bought was from Walmart and Dollar tree.