I want to new year holidays special snow decoration, but real snow, alas, is only outside. How to make artificial snow with your own hands? What is the best way to decorate a Christmas tree, windows, candles, twigs and other interior items with artificial snow? On the pages of our website we have collected best ideas for the production of artificial snow. Let's consider each method separately.

Artificial snow made from candles and talcum powder

To prepare artificial snow, you can use regular talc (baby powder) and paraffin (candles). Grate the pre-cooled candles on a fine grater, mix the resulting crumbs with talc and sparkles (glitters). This snow is suitable for decorating Christmas tree decorations, painting windows and decorating New Year's crafts.

Styrofoam snow

A simple option to get artificial snow is to ruffle the foam. The foam is white and consists of small balls. If you take a Styrofoam package from under household appliances and crumble the Styrofoam with a fork, you will get quite a lot of light and sticky snow.

Please note that foam balls have bad habit become magnetized to all things and are not easy to remove.

Foam snow looks interesting when decorating branches - you can do it.

DIY snow made from paper and soap

To make artificial snow you can use paper towels or toilet paper. 2-3 rolls of paper need to be torn into small pieces. Next, take white soap and place it in a ceramic or plastic container. Place pieces of paper on the soap. Place the bowl in the microwave for 30-40 seconds. The mass should become airy and crumble.

Take the snow mass out of the microwave and pour a little water into it to make the snow plastic. Now you can sculpt such snow and roll snowballs out of it. You can make small snowmen or other funny figures from soap and paper snow to decorate your room for the holiday.

Artificial snow from diapers

Interesting artificial snow can be made from diapers or disposable diapers. The absorbent substance included in the diapers, sodium polyacrylate, looks like snow when it interacts with water. This property can be used to make snow with your own hands.

Take out the stuffing that looks like cotton wool from the diapers, chop it up and put it in a deep bowl. Gradually add to the substance clean water and stir the mixture. It will look like real snow. This snow can be used to decorate crafts, create snowmen and make snowballs.

Eggshell snow

Crushed egg shells look like snow. To make this artificial snow, take the shells of several white eggs, dry them, remove the films from inside shells. Then place the shells in a tight bag and crush them with a hard object by tapping the bag.

Mix the resulting snow with glitter. Now they can decorate New Year's toys, spruce branches, windows.

Artificial snow made from soda and shaving foam

An interesting version of artificial snow can be made from shaving foam and soda. You will need to take 1 can of foam and 1.5 packs of soda.

Squeeze shaving foam into a deep bowl in parts and mix it with baking soda. You will have to mix gradually, adding foam and soda and stirring everything well. You can add glitter to the mixture. Then put the bowl of snow in the refrigerator.

Snow made of polyethylene and starch

Snow mass can be made from polyethylene. Grate the packaging polyethylene or insulation based on it on a medium-sized grater. Add glitter and potato starch to the resulting shavings and mix everything with a little water. Then the resulting snow needs to be dried.

Such snow can be glued (using PVA glue) to artificial Christmas tree branches.

Snow drawings on the windows

Snow patterns on the glass windows look charming. Making this artificial snow is very easy. Using a prepared stencil (), stencils with the symbols of the year and just letters) and a toothbrush, spray snow dust onto the glass. The mass for such spraying can be made from toothpaste and starch.

Mix 1 tube of toothpaste with potato starch and a cup of boiling water. Whisk the mixture until foamy enough. This snow composition is suitable for decorating spruce branches and Christmas tree decorations.

Do you want to decorate thin branches with frost? Then try using regular salt for this purpose. Take 1 kg of salt and dissolve it in 1.5 liters hot water. Do not turn off the heat until all the salt crystals have dissolved. Place clean and dry twigs into the cooled solution. They need to be kept in salt water for at least 4-5 hours. Salt crystals will form on the branches gradually. The longer they remain in the solution, the larger the artificial frost will be.

It's not at all difficult to make artificial snow with your own hands. Choose the desired snow making option for yourself and create with your children. It's not only beautiful, but also fun. May your holiday be bright!

You can bring real snow from outside, put it in a basin and pamper your children. But this magic will not last long as it will melt in a matter of minutes. To decorate the Christmas tree, window sills, candles and other details, you can use artificial snow, which is easily made at home. In some cases, you can even make snowballs from it. We have put together for you the best collection of methods for preparing artificial paraphernalia. Let's look at all the options in more detail.

Candles and talc

To make dry snow, prepare glitter (preferably gold, silver, blue or pearlescent). Also place a kitchen grater, unscented baby talcum powder (powder), and several paraffin candles nearby. white.

Place the candle in the refrigerator for half an hour or in the freezer for 10-15 minutes until it hardens well. After the time has passed, grate it on a medium-sized grater. To create a shimmering effect, add small glitter to the shavings (color of your choice).

The resulting composition leaves no traces, does not dissolve in water and does not change shape upon contact with it. Typically, this kind of artificial snow is used for decoration. New Year's balls and Christmas trees, painting windows and window sills.

Styrofoam

In most cases, foam-based artificial snow looks unnatural. It is used for decoration spruce branches, directly to the spruce/tree itself, window sills, painting balls and filling them, creating small hail and firecrackers.

Paper towels (toilet paper)

Take white paper towels or toilet paper and tear them into small pieces. Grind into crumbs in a convenient way white natural soap, place the composition at the bottom of a ceramic or glass container. Place pieces of paper/towels on top.

Place the bowl in the microwave for 30-45 seconds, monitoring the condition of the paper fibers. They should become fluffier and raised. The soap, in turn, will acquire a softer and more pliable consistency.

After the expiration date, take out the mixture, pour in some filtered water and mix everything with a fork. Place in the refrigerator for 3 minutes, then grind again.

It is from this kind of snow that you can sculpt mini-snowmen, play snowballs, and decorate any surfaces and objects.

Eggshell

Boil several eggs with white (not red) shells. Clean them, remove the films. Place in a tight plastic bag, place on a hard surface and grind into powder with a rolling pin. Once the shell is ready, you can mix it with glitter and then start decorating. Artificial snow It is attached to spruce/Christmas tree branches using PVA glue and used to decorate windows, creating various designs. The composition is used for stuffing transparent New Year's balls.

Baby diapers

No matter how strange it may sound, artificial snow can be made from disposable diapers or white diapers. The thing is that such attributes absorb moisture due to the sodium polyacrylate contained in the composition. In its swollen state, the drug looks like real snow.

To perform the procedure correctly, remove the cotton-like stuffing from the diaper/diaper. Tear it into very small particles, then place it in a deep bowl. Begin to slowly pour in cold purified water and at the same time knead the resulting mixture with your hands. In the end, you will get a decoration that is difficult to distinguish from real snow. The attribute is used to create snowballs, snowmen, and holiday decorations that involve the presence of peculiar snowdrifts.

Baking soda and shaving foam

Pour the soda into a small bottle so that it is convenient to mix it with other ingredients. Squeeze a bottle of foam into a deep container and at the same time add baking soda, then immediately stir. Proceed intermittently: pour in, mix, pour in again. For 1 can of foam there is one and a half packs of soda. When mixing is complete, place the mixture in the refrigerator for 5 minutes. Then take it out and add glitter for decoration. The peculiarity of this method is that the finished snow smells of frosty freshness if you choose foam with the appropriate aroma.

Polyethylene

Very often, housewives use pimply polyethylene, which is used to wrap Appliances during transportation for better cargo safety. Take 1 sq. m. of material, twist it into a tight tube, then grate it with fine divisions. Combine the resulting air mass with pearlescent glitter, add 3-5 packets of potato starch and a little filtered water. Stir until the mixture becomes homogeneous.

After this, dry it on a radiator or under direct sun rays. Shred a little with a fork, then start decorating. The composition looks very beautiful and natural on fluffy artificial Christmas trees and natural spruce trees. To properly attach artificial snow, coat the area to be treated with PVA and then sprinkle it with the compound.

Toothpaste

The method is more suitable for spraying on windows, mirrors, balls, and a Christmas tree. As a rule, a stencil soaked in water is applied to the surface for better adhesion. After this, the voids are filled with snow inclusions. It is necessary to spray very carefully, because the drops scatter into different sides. Buy the cheapest white one toothpaste without colored granules. Squeeze half the tube into the container, add a little filtered water to make the composition more liquid and creamy. Dip your toothbrush into it and point it at the object you want to treat. Run your finger upward along the bristles and release to create specks of splatter on the item.

Starch and soap

To make snowballs, take a foam ball, dip it in the mixture and dry it on the radiator. If you want to decorate windows or Christmas tree branches with the composition, just dip a toothbrush in the snow and cover the surface with blotting movements. You can dry the mixture and then knead it if you need the snow in powder form.

Salt

New Year's wreaths decorated with artificial snow have become very popular recently. Also, many people do not put up a spruce tree, but decorate the room with its individual branches. As a result, you get a kind of frost. To begin the procedure, take enamel pan, pour 5 liters of water into it and add 2 packs of table salt. Place the pan on the fire, stir and heat until the mixture dissolves. When this happens, turn off the stove, put the branches in the container and wait 4-6 hours. During this time, the salt will be absorbed into the needles and form an original snow crust. At the end of the period, remove the branches and leave them to dry for half an hour.

Edible artificial snow

Experienced housewives pamper their children with artificial edible snow. They can be used to decorate festive table, in particular, New Year's, you just need to show imagination and perseverance. To add some magic to baked goods, fruit salads or other desserts, simply pour some fluffy cream over them and sprinkle powdered sugar. Boiled chicken protein, grated, is suitable for second courses.

It's easy to make artificial snow at home if you have some various ways. Use polyethylene, foam, eggshell, toothpaste, a mixture of shaving foam and baking soda, paraffin candles and talcum powder. Treat your kids to some edible magic with powdered sugar and cream.

Video: how to make artificial snow with your own hands

Winter is in full swing, and although last year's New Year's holidays have already passed and have even managed to be forgotten a little, winter-themed crafts are still relevant, especially if there are snowdrifts outside the window. Snow... It’s so good to make an original snowman that you often even want to take it home. However, sparkling in the frosty sun snow craft in a matter of minutes it will melt in the warmth, bringing grief and natural everyday problems. And if so, then let’s get down to business and learn how to make artificial snow, which will delight you and your loved ones, giving your masterpieces a truly fabulous winter flavor! In this article you will learn how to make artificial snow at home.

In fact, there is no one recipe for making artificial snow with your own hands: there are many known methods that differ from each other in the result - the resulting “snow” mass - sometimes quite strongly. However, each recipe has its adherents among craftsmen and can serve decorative purposes in its own style, for certain crafts. In this article we will look at several of the most successful, in our opinion, methods for making artificial snow and frost: we advise you to try each one, choosing for yourself best option(or variations).

For the sake of objectivity, it is worth mentioning that there are special aerosol cans with “artificial snow” on sale, the contents of which very realistically reproduce real snow, as well as corresponding powders and granules for dissolving in water. However, we will not follow this simple, but significantly more expensive path, but now we will begin to roll up our sleeves and get down to business.

Any artificial snow recipe is multi-component in structure and consists of several ingredients, which, when mixed in certain proportions and under certain conditions, give the desired result. Almost all of the proposed options are easy to make in a regular kitchen or home workshop.

How to make artificial snow at home?

Method No. 1

You can get a great sparkling result by mixing cornstarch with shaving cream and glitter. You will have to experiment with proportions to achieve the result you want. If desired (and if available, of course), you can add mint extract when kneading. Instead of starch, corn flour is suitable, and glitter is often “replaced” with mica. In any case, the result of your efforts will definitely please you.

Method No. 2

Shaving foam can also be mixed with regular baking soda(sodium bicarbonate, sodium bicarbonate or sodium bicarbonate are the same thing, do not be alarmed by the differences on the packaging from different manufacturers). It is important to gradually add it to the foam squeezed out in advance into a suitable container, resulting in a pleasant to the touch white mass You can “season” it with sparkles, achieving the charm of snow sparkling in the sun. Usually one and a half standard packs of soda are required per can of foam.

Method No. 3

Pre-frozen toilet soap grated on a cheese grater looks incredibly believable as artificial snow. Any variety will do, as long as the color of the bar is as white as possible. Mint extract and glitter added to the resulting mass will also come in very handy for more decorative effect.

Method No. 4

Not a very cheap and not at all free way (although, for whom it depends) - gutting an ordinary baby diaper: we only need its sodium polyacrylate filler, which then needs to be torn into small pieces. This is an absorbent material that crystallizes when exposed to moisture and retains it. Therefore, the material extracted from the diaper is placed in a container and gradually poured clean water, just make sure that there is not more than enough to form “snow”. If you have doubts about the harmlessness of sodium polyacrylate, take into account the fact that you took it out of the thing that is most loyal to the baby’s sensitive body - a diaper.

Method No. 5

In nature, snow, as you know, can look somewhat different, while remaining the same snow. That's this method offers a slightly unique artificial snow - it is best used to create “snow massifs”, “snow-covered expanses”. You will need ordinary starch, PVA glue and silver paint: just take one equal part at a time (usually it is calculated in the volume of 2 tablespoons, but this is not important) and mix and grind thoroughly until you get the “snowy” mass you need.

Method number 6

This is not really snow, or rather, not snow at all, but “frost”, which may be required to create believable compositions. Sprigs of pine needles, ordinary twigs and grass are covered with a very steep layer for this purpose. saline solution, which, when dry, crystallizes on their surface and shines, just like real frost! And achieving this effect is very simple: table salt coarsely ground gradually pour into a container with hot water on the stove over low heat, and when the salt stops dissolving, turn off the heat and lower the pre-prepared plants into the solution. The twigs with future “frost” are infused until the water cools, then they are removed and dried in normal conditions approximately 4-5 hours – you will see the result for yourself!

Method No. 7

Often, to design a “winter” craft, you may need the so-called. " snow paint" To prepare it, let's take the shaving cream we already know (the brand doesn't matter - the main thing is that it is white), PVA glue, as well as the ubiquitous glitter - where would we be without them, and mint extract. Well-mixed ingredients form a characteristic mass, which is applied with a brush or sponge and can be used to either tint a craft or fully draw on a plane, for example, snowmen.

OK it's all over Now. “The Magic Seven” completes our selection of the most available ways making artificial snow to decorate crafts on a “winter” theme, giving them the necessary charm and appropriate color. In fact, there are almost three times more such methods, however, those presented here will be quite enough to create real masterpieces!

Artificial snow can help you have fun with your child and is also useful for a variety of crafts/crafts. How to make it so that it is quite affordable and simple? We have collected 20 artificial snow recipes for you - try them and share your impressions. Not all of them will completely imitate snow - fluffy, soft, cold and smelling fresh. There is “snow” paint for painting, “snow” slime, “snow” plasticine, and other interesting substances. But they all have a direct connection to snow and will definitely appeal to children. And if you need “adult” options for use in needlework, then immediately proceed to the second part (point 9 and further)

For children, the most interesting options are those proposed by Crystal Andrewood

How to make artificial snow at home

1. Shining Snow

It turns out cold, fluffy and very soft.

Ingredients:

Two boxes of cornstarch/cornmeal

Shaving cream

Peppermint extract (optional)

2. Snow plasticine

Ingredients:

2 cups baking soda

1 cup cornstarch

1 and 1/2 cups cold water

A few drops of mint extract

3. Snow slime

Ingredients:

2 cups PVA glue

1.5 cups hot water

Optional: a few drops of mint extract to give the slime a frosty aroma

Mix in a small bowl

Mix in a second bowl

3/4 teaspoon borax

1.3 cups hot water
Combine the contents of both bowls and mix with your hands for several minutes until the mixture begins to stretch.

4. Snow paint

Ingredients:

Shaving cream

School PVA glue

Peppermint extract

5. “Silk” snow

Ingredients:

Frozen white bars of soap (any brand)

Cheese grater

Peppermint extract

Preparation method: Place the soap in the freezer overnight. In the morning you can take it out one piece at a time (Kristall used 6 bars) and grate it. You will get fluffy snow, to which you can add glitter and mint extract. It molds perfectly, and you can make a snowman or any other figure.

6. Snow dough

Ingredients:

Cornstarch (freeze overnight to snow dough it was cold)

Lotion (refrigerate overnight to keep dough cold)

7. “Liquid” snow.

Ingredients:

Frozen Corn Starch

Ice water

Peppermint extract

To the starch that you took out of the freezer, you need to add ice water before receiving desired consistency. It is recommended to add a little at a time so that the “snow” does not turn out too liquid.

Also, if you've never done this before non-Newtonian liquids, you may be in for a surprise. Because when active interaction the mass becomes harder and more viscous, and spreads at rest.

8. Snow made from shaving foam

Ingredients:

1 can of shaving foam

1.5 packs of soda

glitter (optional)

Squeeze the contents of the foam can into a bowl and gradually add soda. You will have a very nice mass of snow from which to sculpt figures.

Now let's move on to the adult part.

Artificial snow recipes

9. Snow made of polyethylene foam

Ingredients:
foamed polyethylene (used as packaging material for equipment, glass, shoe inserts) or polystyrene foam;
fine grater.
We wear gloves. Grind polyethylene or polystyrene foam and... Voila! Fluffy cereal all over your house!!! If you add glitter, the snow will also sparkle. You can powder anything with this snow if you first lubricate the surface with liquid (diluted with water) PVA glue.

10. Snow from polymer clay

Ingredients:
remnants of dried polymer clay (plastic).
Craftswomen often have leftover polymer clay that they hate to throw away. It is very convenient to grind it by hand and then using a coffee grinder. The result is a light and multi-colored (when using colored clay) snowball, which can be used to decorate cards and other hand-made products.

11. Snow from a baby diaper

Ingredients:
baby diaper.
To get snow you need:
1. cut the diaper and remove the sodium polyacrylate from it, and then tear it into small pieces.
2. Place the resulting mass in a container and fill it with water. Pour gradually, in small portions, until the pieces of polyacrylate begin to resemble snow. Just don't overdo it or it will end up too wet;
3. To make the snow look more realistic, place the container in the refrigerator, but not in the freezer.

12. Frost from salt

Ingredients:
salt (preferably coarsely ground);
water.
Prepare a concentrated salt solution. To do this, fill the pan with a small amount of water and place it on low heat. Add salt until it stops dissolving. Dip the branches of spruce, pine or any other plant into the hot solution and leave for a while. The process of crystal formation is much faster in warm water! Let the water drain and leave the plants to dry for 4-5 hours. Sparkling frost is guaranteed! If you add brilliant green to the salt solution, food colorings or ink, the frost will turn out colored!

13. Artificial snow for a “snow globe”

Ingredients:
Paraffin candle
It must be grated on a fine grater. This “snow” is great for making toys “a la snowball"when glycerin and artificial snow flakes are added to the water. The container is hermetically sealed and when shaken, the snowball smoothly sinks to the bottom.

You can really go more in a simple way- and add regular sparkles to such a ball. It will turn out no less impressive.

14. Snow made of PVA and flock

Flock is a very finely chopped pile. And if you're lucky enough to find a package of white flock on sale, rejoice. After all, now you will have “snow” for any craft in a matter of minutes. It is enough to generously coat the surface with glue and sprinkle flock on top (you can use a strainer).

15. Snow made from PVA and starch

Ingredients:

2 tablespoons starch

2 tablespoons PVA

2 tablespoons silver paint

Mix (grind) the ingredients thoroughly.

This kind of snow is suitable when you need to decorate the surface of a product with a voluminous white mass.

16. Mass imitating snow

Ingredients:

fine quartz sand or semolina or foam chips

white acrylic

thick PVA

1. Pour into a bowl a small amount of the material you have chosen. Approximately 1 faceted glass.
2. We begin to gradually add white to this bulk material. acrylic paint. Based on experience, it is better to buy it in hardware store For facade works. We add until such a state that our loose particles stick together, but do not float in the liquid.
3. Then add PVA, preferably thick. We also add very little so that the mixture is elastic and viscous.
4. Well, and some silver sparkles. Mix everything and... that's it!!!

Recipes for edible “snow”.

17. Sugar snow

Ingredients:
sugar.
Dip the edges of the glass (glass) into water or syrup and then into sugar.

18. “Snow-covered” plants
Ingredients:
gum arabic;
egg white.
Using these components, you can sugar plants (non-poisonous and non-bitter). Good taste flowers of pear, apple, cherry, rose, violet, primrose, lemon, begonia, chrysanthemum, gladiolus, pansies. Candied leaves of mint, lemon balm, and geranium turn out beautiful and very fragrant. Dissolve 12 g of gum arabic in ¼ cup of hot water (in a water bath) with constant stirring. Cool the solution. Prepare sugar syrup: 100g sugar per ¼ glass of water. Cool too. Apply gum arabic solution first to the plants with a brush, and then sugar syrup. Sprinkle with fine granulated sugar (not powdered sugar). Dry on parchment or tracing paper. Such “snow-covered” beauty will not deteriorate for several months. These flowers can be used to decorate a birthday cake or your favorite small sweet pastries.

19. “Snow-covered” plants - option 2

Ingredients:
egg white;
sugar.
Beat egg white and sugar until foamy. Apply with a brush to the petals of the plant and sprinkle with powdered sugar. Place the plants prepared in this way on parchment and place in the oven over low heat. In two hours you can admire the beauty!

20. salty “snow” for meat

Ingredients:
a pinch of salt;
egg white.
Beat the egg white and a pinch of salt into a stiff foam using a mixer. Place this improvised snow on the meat and send it to the oven! Miracles: a chicken in a snowdrift!

I really hope that from these 20 artificial snow recipes you were able to choose the one that suits you.

The New Year holidays will begin very soon. And it’s time to get ready to decorate the house, take out tinsel, Christmas tree decorations, garlands and other familiar decorative elements. But the same type of compositions created year after year can get boring, so you can try to make original and simple crafts with your own hands from scrap materials.

Cotton balls that resemble real snowballs will look very neat and stylish. These delicate and soft products can be used for play, made into a composition, or, by adding a mount, hung on a Christmas tree.

How to choose a base for blanks

There is cotton wool in every home, so making snowballs from this material will be easy. You can also involve children in making New Year's decorations, turning this activity into an exciting game. There are several ways to make a snowball out of cotton wool. One option: take newspaper or crumpled paper as a base, apply PVA glue to the surface, and wrap the material in several layers. These snowballs will turn out heavy and hard. They are best used for arrangements or as decorations at the bottom of a Christmas tree. Making soft cotton balls requires a little patience and a few readily available materials.

Creating decor from scrap materials

The process of making snowballs from cotton wool with your own hands, step-by-step instruction which is given below, does not take much time and does not require special preparation. In the central part you can place a padding polyester or a piece of polystyrene foam, an old sock or nylon stocking, or a ball of thread. It doesn’t matter what the base looks like, it still won’t be visible under the cotton wool shell. Therefore, you can use almost any material that is at hand. Of course, it is desirable that the blanks be light or white - then you will not have to worry that the variegated base will begin to show through upper layer. But, if there are no other options, to avoid this, you just need to use large quantity material.

Do-it-yourself cotton wool snowballs: step-by-step instructions

How to make a snowball from cotton wool:

1. Cooking necessary tools- scissors, white thread with a needle, an unnecessary stocking and cotton wool.
2. Cut the stocking into pieces.
3. You can place unnecessary scraps of fabric inside each piece, and then stitch the material so that you get a spherical blank.
4. After this, it is enough to decorate the surface with cotton wool or a bandage and stitch it with white threads so that the craft does not fall apart.

If parents are engaged in making jewelry with their child, it is best to entrust the choice of material and surface treatment to the children, and leave the work with the needle to adults, since it is a dangerous tool, children can get hurt. The finished snowball will look more decorative if you add sparkles or regular Christmas tree tinsel to the cotton wool.

A quick way to make cotton balls

When doing needlework with your child, you can use one quick way how to make a snowball from cotton wool. For it you will need PVA glue and hairspray with glitter. The technique for creating such a craft is very simple: just drop glue on a piece of cotton wool, roll it into a ball and cover it with hairspray. Of such decorative elements you can create a composition, make a snowman, or make a snow garland by stringing balls on a thread.

If you unroll a skein of cotton wool in the form of a sheet, pour glue on it and roll it into a ball, you get a big snowball. The process of making it is very similar to how real lumps of snow are molded. It is also best to decorate the surface of such a ball with hairspray with glitter. It is advisable to use a strong hold varnish.

How to make a snowball using cotton pads

Cotton pads - affordable and universal material, from which you can create amazing new Year decoration, including snowmen, Christmas tree decorations, garlands, and the Christmas tree Same. Using a thread, a needle and a little imagination, needlewomen create from these familiar objects household items of angels, flowers and decorative panels. For the snowball from cotton pads make special blanks in the form of corners.

Each circle is folded twice and secured with glue. Then glue is applied to the tips of the resulting corners and they are assembled in 4 pieces. The resulting parts are connected to each other to form a hemisphere. By collecting two hemispheres, you can get a finished openwork snowball.

Cold method of making snowballs

There is another one interesting option how to make a snowball from cotton wool. But for it you will need to cook a starch paste. Take 2 teaspoons of starch per glass of cold water and bring to a boil over low heat, stirring constantly to prevent lumps from forming. If this does happen, they can be removed with a fork.

The resulting mass should be cooled so as not to get burned while working. Using a brush, glue is applied to previously prepared cotton balls. It is advisable to spread the glue over their surface in a thin layer, after which the snowball can be dipped in glitter and dried with a hairdryer or on a radiator.

Turning a snowball into a Christmas tree toy

It’s easy enough to turn cotton wool snowballs into Christmas tree decorations if you glue a ribbon or other fastener to them. The surface can also be decorated with bright threads or painted in different colors using ordinary watercolor paints or gouache. It is enough to dilute the paints desired color in water and dip the workpiece in it, then dry it on a sheet of paper.

Cotton pads can also be easily painted with gouache. They can be used to create figures made up of various colored parts. The elements are fastened together using paste, but before painting, it is important to dry all the workpieces thoroughly. This is done so that the paint does not flow.