If you want to buy Rehau plastic windows in Moscow, my advice is definitely RAMokna! I would like to note the high level of service at all stages. During our first telephone conversation, manager Olga clarified the details and spoke in detail about each type of profile. In the end I chose Rehau. Next, a surveyor arrived who took into account all my wishes (I wanted to widen the opening a little). And the work of the installers is beyond praise. Fast, neat, with a minimum of dust...
Stepanova M.A.
Choosing a profile is not an easy task. I looked at many websites, weighed all the pros and cons, and ultimately decided to order Rehau windows. They are perfectly adapted to our climate and are reliable in operation. As for the price, this is where it turned out to be the cheapest, plus the installers took out the old frames, collected the garbage and swept the room. I am delighted! I want to express sincere gratitude to the team of the Ramokna company. Thank you!
Konstantin Evgenievich
Plastic windows Rehau have proven themselves perfectly, they have been serving faithfully for more than ten years, they have never even been adjusted. At the beginning of summer, my wife and I went to order windows for country house, and of course the choice was obvious. And besides, the official Rehau dealer in Moscow is located just two blocks from our house. This is our second purchase from FRAMEWORK. And we advise you!
10% MORE LIGHT
Biochemical laboratory experiments have shown that bright sunlight promotes the formation of serotonin, a hormone responsible for energy and mood. And sunlight enters our houses through windows. Therefore, when arranging an apartment or house, we special attention we choose a window design, the perfection of which determines the indicator natural light living space.
HARMONY OF LIGHT AND STYLE
Windows made from REHAU DELIGHT-Design profiles will be an excellent investment if you value an atmosphere of light, warmth and comfort, individual design and high functionality.
5
cameras,
70 mm profile,
2
seal contours
More joy!
The know-how of the DELIGHT-Design technical solution makes it possible to reduce the height profile design and let in 10% more light into the room compared to conventional windows. And this means more joy and well-being!
Refined, sleek design DELIGHT-Design windows successfully harmonize with their ability to reliably conserve heat even in severe frosts, which means that you do not have to heat the street at your own expense. The windows are given a special sophistication by the new figured sash and decorative glazing bead with elegant relief.10% MORE LIGHT
Description
DELIGHT-DESIGN: HARMONY OF LIGHT AND STYLE
The know-how of the DELIGHT-Design technical solution allows you to shorten the frame of the frame and the sash and let 10% more light into the house compared to traditional systems. In addition, the DELIGHT-Design system provides an excellent opportunity to improvise and meet your individual window design wishes. The designer door is distinguished by noble proportions, roundness of shapes and graceful relief of the decorative bead.
MAIN SYSTEM FEATURES:
- System depth / number of chambers: 70 mm / 5 chambers.
- Exceptionally high thermal insulation value: rdef=0.8 m2 s/W.
- Burglary safety: installation of reinforced locking devices due to a 13 mm displacement of the axis of the device groove.
- Air- and water-tight: reliable protection against drafts, dust and water thanks to two sealing contours (7/8 mm seal overlap outside/inside).
- Surface: high quality, perfectly smooth, easy to clean.
Advantages
WARM AND COMFORTABLE
Increasing the area of translucent filling window design of the Delight-Design profiles does not come at the expense of others functional characteristics. The depth of 70 mm, the five-chamber profile structure and the ability to install double-glazed windows up to 41 mm thick reliably retain heat inside the house.
10% MORE LIGHT
Windows from the Delight-Design profile system are in increasing demand in the private customer market due to their special sophistication, aesthetic appeal and the ability to make the room brighter. They answer general trend to increase the translucent part of the window: in our climate zone with a small amount sunny days people want to fill their home with light as much as possible.
Application area
CONSTRUCTION SOLUTIONS
Windows made from REHAU DELIGHT-Design profiles are used in high-rise and private suburban construction. They are suitable for the construction of new buildings and renovation of existing ones.
The REHAU DELIGHT-Design window system allows you to meet high demands on thermal insulation, design and natural light.
The REHAU company produces several collections of profiles for plastic windows, each of which is aimed at meeting specific customer needs and solving different types problems. Thus, REHAU DELIGHT Design plastic windows help make the room noticeably brighter - the results show that they transmit 10% more sunlight. This became possible thanks to a reduction in the profile height and transformation of the frame shape: it is noticeably narrower, devoid of sharp corners, looks softer, more graceful. The changes did not in any way affect the technical performance of the window: it perfectly retains heat and protects against noise.
Profile technical characteristics
REHAU DELIGHT design plastic windows are an example of how you can successfully combine current design and manufacturability window systems:
- a design with a narrower frame lets in 10% more light and at first glance seems very light;
- a noticeable feature of the design is the presence of decorative plastic glazing beads, which make the windows less urban, and more comfortable and homely;
- production technology allows the use of the profile for glazing rectangular, arched, round window openings;
- the narrowing of the frame did not affect the thermal insulation performance and sound insulation properties - the profile reduces even the most loud sounds up to 36 DB, its heat transfer coefficient is 0.8 sq.m/W;
- the REHAU DELIGHT window profile has an installation thickness of 70 mm and is equipped with a five-chamber double-glazed window, the price of which may vary depending on the thickness of the glass and additional protective options;
- steel reinforcement of the profile makes it more resistant to wind loads;
- the surface of the plastic is perfectly smooth, practically without pores, therefore it perfectly resists any negative environmental factors;
- The window can be painted in any color according to the catalog and anti-burglary mechanisms can be installed.
Plastic window systems based on this profile are universal, suitable for all operating conditions, but especially for houses and apartments with small window openings or their orientation predominantly to the north side.
The Delight-Design system is the most affordable five-chamber Rehau profile with a depth of 70 mm, exceeding GOST requirements for thermal insulation by more than 70%.
Delight-Design is Rehau's most modern profile system. A set of innovative solutions made it possible to produce products with the best price-quality ratio.
The Rehau Delight profile has high thermal insulation - 0.8 m²C/W. The system allows you to install a double-glazed window with a depth of 41mm, which allows you to provide highest class on sound insulation.
Features of Rehau Delight
Rehau Delight has minimum height frame profile among analogues with standard reinforcement (35x20 mm), which allows you to install a larger glass unit. This feature allows you to increase the light transmission of the window by 10%.
New design of Rehau Delight
The Rehau Delight profile is offered with two types of doors: in the traditional design Z57 - with inclined end edges and in the new design Z53 - with a semicircular overlay. The height of the frame + semicircular sash combination Z53 is lower than the option with a traditional sash, which makes the design of the Rehau Delight window more lightweight.
It is possible to install two types of glazing beads in the sashes: semicircular and figured. This solution allows you to coordinate the design style with the interior design. Designer beads with a depth of 14.5 mm limit the depth of the glass unit to no more than 32 mm.
Prices for plastic windows Rehau Delight
Natural light in the room creates a comfortable atmosphere and adds lightness and airiness to the interior design. The source of daylight in the room is windows. The larger they are, the brighter, but in rooms with large windows Heat loss often occurs. Because of this, projects often do not use dimensional window connectors. Metal-plastic construction Rehau Delight Design easily solves the problem of energy saving, allowing you to retain heat and ensuring maximum penetration of natural light into buildings.
(Only for residents of Moscow and the Moscow region), send a request to calculate the cost:
Premium German brand on the Russian market since 1995. With us you get real German quality from a company with a 48-year history around the world.
- ALL profile systems top class "A"
- ALL are made frost-resistant and marked with the letter “M”
- ALL have maximum 4-sided steel reinforcement
- Uniform quality standard regardless of country of production
The more air chambers, the less air exchange and, accordingly, the higher the thermal insulation.
The wider the profile and the greater the installation depth, the higher the thermal insulation.
Profiles ONLY of the highest class “A”
According to thickness internal walls ALL of our profiles are of the highest class “A” - the thickness of their front wall is at least 3 mm.
- class “A”: front wall not less than 3.0 mm
- class “B”: front wall not less than 2.5 mm
- class “C”: wall thickness is not standardized
Please note that 80-90% Russian market these are classes “B” and “C” and only 10-20% of class “A” profiles. At the same time, our assortment includes ONLY class “A” profiles.
We fundamentally DO NOT use profile systems of classes “B” and “C” (with a front wall width of less than 3.0 mm).
ONLY frost-resistant profiles
According to GOST 30673-99 “PVC profiles for window and door units” for resistance to climatic influences, ALL of our profiles are “frost-resistant” - for areas with an AVERAGE monthly air temperature in January BELOW minus 20°C.
GOST standards for different classes:
- normal version "N": average temperature in January - minus 20°С and above
- frost-resistant version “M”: the average temperature in January is lower than minus 20°C
Our assortment includes ONLY frost-resistant profile systems marked with the letter “M”.
Heat transfer resistance (thermal thermal resistance) is the main thermal insulation coefficient. Determined by the ratio of the temperature difference between outside and inside the room to heat flow passing through the window. The higher this number, the better the insulation performance.
Evolutionary double-glazed windows SmartGlass 2.0
Our multifunctional double-glazed windows work for you both in winter and summer. In winter, spraying silver particles retains up to 90% of thermal energy heating devices, and in summer the double-glazed window reflects 25% more solar heat than conventional plastic windows.
- 42% more HEAT in winter (energy saving properties)
- 25% less HEAT in summer (sun protection properties)
All our double-glazed windows contain special energy-efficient glass. We DO NOT use ordinary glass even in the most basic configurations.
AirDrive I, II and III climate control systems
Built into the windows optimal mechanisms ventilation - the doors open slightly by 1-5 mm depending on the selected mode. These are NOT external devices (combs or valves), but BUILT-IN ventilation fittings.
Three options:
- AirDrive I: slot ventilation (1 mode)
- AirDrive II: discrete multi-stage ventilation (3 modes)
- AirDrive III: discrete multi-stage ventilation (5 modes)
We try not to put combs because of them appearance(only at your request). In principle, we do not use valves due to the fact that they violate the integrity of the window, reduce its tightness and strength (since the profile and its reinforcement are drilled through).
