An easy way to remove a lock from a door. How to remove a door lock

Photo from the site stroite-sami.ru

Agree, it’s unpleasant when the door lock breaks for some reason. In these situations, you need to call a specialist. But what if you need to do the work right now? In the article we will look at how to remove an interior door lock with a handle, an internal mortise lock with a cylinder from an iron door, a device from a metal apartment door, with a latch, and many others, and we will also show a video.

Types of locks and features of their design

A door is a kind of barrier that does not allow entry into any part of the home or territory. Therefore, the issue of replacing the lock requires a prompt solution. You can wait for the technician, however, if you are short on time, you can deal with this problem yourself

To remove a door lock, you need to equip yourself with the following tools:

pliers;
screwdriver;
roulette.

For your convenience, we have divided all possible designs into several types. Each subheading will detail instructions for removing a specific type of lock.

Mortise locks

They are an unlocking/locking device embedded inside the door. It takes longer to work with such locks because of the design of the device and its location in the door.

Cylinder locks are the most popular due to the simplicity of the mechanism and its installation.

Push mechanism

photo from obesedkah.ru

Mortise locks are equipped with a push mechanism. It is a door handle with a mechanism attached to it, which is necessary to press it.

The principle of operation of the device is simple - you press the handle, thereby turning the lever mechanism inside, and the tongue opens.

Such devices have a number of advantages:

Ease of use. Agree, it is much more convenient to press the handle than to turn it. If your hands are busy and you need to open the door, you can, for example, press the handle with your elbow.
Door handles of this type are extremely comfortable in the hand. You can open and close the canvas without much effort.
Aesthetic component. Push handles have a fairly wide range. You can choose between metal, plastic and even glass. Choose the option that matches your interior.
Simplicity of the mechanism. Such devices have a very simple control element. It is easy to remove if necessary. To do this, simply remove the decorative trims, unscrew the two screws on the mechanism and carefully push the screwdriver towards you.
Durability. Compared to other devices, these last longer and do not have problems during long-term use.

Round knobs and knobs

photo from the site zamokok.ru

There are noba handles or so-called round handles. They are an elongated oval ball that must be turned in order to open the door.

They have their own specific number of advantages:

These types of handles are absolutely safe. When using them, it is impossible to get injured, for example, if you get caught in soft tissues.
Along with push door mechanisms, they have a simple internal design. Their design is absolutely normal and has no internal nuances. To remove it, the outer decorative ring is unscrewed in the same way, two screws are unscrewed from the end and the entire mechanism is removed.

However, along with the advantages, there are some disadvantages:

This handle is relatively inconvenient when opening. In order to turn the lock, you need to clasp the nobu (round handle) with your full palm, therefore, if your hands are full, the task is impossible.
The price difference between these handles varies greatly. It depends on the material and core of the lock. Obviously, if you buy the cheapest option, the mechanism can become unusable extremely quickly, and the handle can significantly lose its aesthetic component.

Other options

There are also options for interior door handles without a mechanism. Their design includes a ball-lock on a spring, which can get inside the canvas. The principle of operation is as follows. A mechanism with only one tongue is built into the canvas. It looks like a round ball, which, when pressed, penetrates into the canvas. There is also a handle screwed to the door, which does not have any mechanisms. Opening occurs solely through physical force. The ball gets inside and the door calmly opens.

Advantages of the following design:

It is worth noting that such a device is cheap. In fact, you do not need to carry out any complex manipulations with the canvas in order to install a lock of this kind. You just need to cut a hole for the device, install it and screw on the handle.
Complete immunity to jamming and breakage. No, of course, the device may become unusable over time, however, under force, the door will still open with ease.

However, there are significant disadvantages:

Simple pen. From an aesthetic point of view, the handle on such a door will always look extremely simple.
The lock does not close. The door can only be closed, as they say. Unfortunately, there is no way to lock her up.
Over time, the door frame wears out as the roller constantly rides on the timber of the door counter.

To remove a lock from any door with a cylinder or flannel mechanism, use the following instructions:

Move the door to the open position. This way it will be much easier for you to cope with the task.
Remove the lock protection. This will take you to the handle and cylinder mechanism that allows you to lock the device from the inside. In order to freely release the lock from the door as a result of the work.
Unscrew the strip at the end of the door. After removing it, remove the lock.

Everything turned out to be extremely simple. But, since situations are different, let’s look at a few specific examples.

How to remove a lock from a door if the door is closed

It happens that the lock is blocked when the door is closed. Moreover, it may turn out that you cannot open the mechanism both from the outside and from the inside.

Let's say you are indoors and you need to open a fire exit with a metal mortise lock. Its cylinder is rusty, therefore you cannot turn it. What to do in this situation?

It is important to know

Please note that the lock does not need to be disassembled to lubricate it.

Buy WD-40 lubricant at any hardware store. The product is a complex chemical reagent that allows you to lubricate old metal parts, extending their service life.
Pour some liquid into the cylinder. This is easy to do - put a special rod on the dispenser and pour over the lock. The product has an oily structure, so take care of surfaces in advance.
After pouring some liquid onto the lock, make sure it gets into the cylinder. Now you have about two minutes of free time. Then go to the lock, remove all the discharge with a napkin and re-use WD-40, gradually turning the tongue. The door should give way.

If you are unable to unlock the lock using this method, you will have to disassemble it. All mortise locks on metal doors can be removed in case of emergency.

photo from the site Bia.su

To do this, use the following instructions:

Unscrew the outer cover. To do this, it is usually enough to remove two self-tapping screws from the top and bottom of the strip. If they do not give in, use the same WD-40.
Remove the latch tongue. To do this, start rotating it counterclockwise and it will unscrew.
By removing the decorative strips, you can also remove the handle. Remove it by unscrewing one screw from its base. There is a possibility that after removing the handle from the lock, its second part will fall off on its own. In any case, the rusty mechanism will have to be replaced, so don’t be gentle.
Now you have access to all the internal “organs” of the castle. Inspect it carefully and remove as much rust as possible with a Vedashka. Be sure to wipe everything with a damp cloth.
Unscrew the lock from the base of the inside of the door if necessary. For this purpose, as a rule, two to four bolts are provided along its perimeter. If they are not there, it will be easier for you.
Carefully use the screwdriver as leverage. Hook the inside of the lock and, resting against the base of the tool, slowly move the mechanism from the edge of the blade to its center.
As soon as the lock tongue comes out of the mating groove, the door will unlock and you can safely change the locking device.

How to remove a lock from the outside of a door

This process will not be much different from the process of releasing the lock from the inside. If the door is blocked and you find yourself outside, find the necessary tools and repeat all of the above in the same order.

If you have an expensive front door, from famous manufacturers, you will have to call a specialist. There is no other way, alas. Make sure that the specialist is competent enough, and it would be better if you call a representative of the company who installed or produced your canvas. Such a person will usually be able to open the door without harming him.

How to remove a padlock

Removing a padlock does not have any nuances. This is extremely easy to do from the inside. Use these short instructions to perform all the work correctly:

Unscrew all screws to which you have access. This way you can free the device from all fasteners and it will move freely from the canvas.
Pull the entire mechanism in the direction opposite to the mating part.

The lock is open.

However, it is not possible to do anything with the padlock from the outside. As a rule, such devices on the front side only have a cutout for a keyhole, therefore, in order to open such a door, you need to use the services of door opening specialists or cut out the lock using a grinder.

Difficulty removing the lock

It doesn't take much effort to remove the lock from the door. As a rule, everything happens in two simple steps - unscrew a few screws and pry it off with a screwdriver. However, there are a number of difficulties that can significantly complicate the task. Let's look at the most common ones and comment on each one:

The door is locked from the inside and there is no way to remove the lock from the outside. In this situation, you can only rely on the help of specialists. Be prepared for the fact that some kind of confirmation will be required that it is your property behind the door. For example, a passport with registration. Otherwise, popular companies will refuse your work in most cases.
I can't unscrew the screw under the decorative trim. We can recommend two solutions to this problem. The first is to lubricate the screw with Vedashka and wait. Maybe the bolt is just rusty inside the lock and the corrosion is preventing you from stripping it from the threads. Use the second option only if WD did not help you. Take a drill or a powerful screwdriver. Select a drill bit that is approximately the same size as the bolt diameter and drill it out. Most likely the drill will become unusable, but the task will be completed.
The key broke in the lock. In this situation, you will have to drill out the entire cylinder. The situation is the most opposite thing that can happen to the door, since in this state of affairs the entire mechanism will definitely have to be changed. However, there is a possibility that all is not lost. If you can hook the key with pliers and pull it out, you may be limited to spending only on the key and nothing more.

As you can see, removing any type of lock is absolutely not difficult. If you need to replace the mechanism or any part of it, use these instructions. The video offers a practical solution to this problem that will help resolve any questions you may have. Keep in mind that questions about opening the front door are best left to professionals. This way you don’t risk being left without a door for a long time.

Depending on life situations, skills such as removing a lock from a door with your own hands may come in handy. We will try to cover this issue in the article so that you can take advantage of our recommendations.

First, prepare the tools: screwdrivers, hammer, pliers. It will be helpful to find a diagram that tells you step by step how to install a door lock. If this fails, we examine the door lock and trim to determine the type of lock and create an action plan. Next, we unlock the door, unscrew the stoppers and fastenings, armored linings, pull out the cylinder mechanism, remove the bars, unscrew them from the vertical crossbars, unscrew the bolts and nuts, and unhook the rods.

Removing a lock from a door is easier than installing it, so you need to act carefully so as not to damage the door and trim.

Features of installation and dismantling of door locks

To install and dismantle door locks, we determine the appropriate actions based on the type of installed lock:

mounted – sawing, breaking hinges;
overhead – unscrew the fastening bolts;
mortise - we unscrew the screws or use a special rod. Understanding how the lock works, you can easily carry out installation or dismantling manipulations. All small details must be preserved so that there are no problems with the functionality of the lock later.

Removing/installing a cylinder lock cylinder

Malfunctions of a cylindrical mortise lock mainly come down to the breakage of the cylinder. To remove:

use a screwdriver to unscrew the screw holding the core;
turn the key in the lock until the cam of the cylinder disappears in the cut of the cylinder;
The cylinder is removed from the lock body when pressed from the outside.

If the key is jammed, drill out the cylinder.

The replacement process boils down to the following steps:

door in open position, locking bolt inside;
remove all elements of the lock: key, protective case, door handle.
unscrew all the fasteners, pry the lock and pull it out.

Installation of interior locks: how to remove a door lock with a handle

To remove/install interior locks yourself, you need simple tools: a chisel, a drill, a hammer and a screwdriver. In some cases, a hex wrench may be required. For installation, you need to prepare a seat for the bar, holes for the door handle and a recess for the lock. Using a ready-made diagram, you can easily install any type of interior lock: a latch with a handle, a latch, a mechanism with a secret lock. Removal does not take much time and effort, and is carried out in the reverse order of installation.

With constant mechanical stress, handles (bath, kitchen, pantries) are the first to fail. Then the question becomes relevant: how to remove the lock from the door? The replacement process is simple and requires a wrench and a screwdriver. We do it as follows:

Unscrew all the screws that secure the lever;
use a wrench to unscrew the lever and pull out the rotation unit with the spring from the handle;
unscrew the retaining ring and release the spring and washer;
unscrew the locking ring and tighten it;
if the washer or spring is broken, they need to be replaced.

Removing/installing locks with magnetic mechanisms

Locks with a magnetic fastening mechanism have padlocks and mortise locks, so removal is carried out according to the same scheme, you just need to disconnect the lock from the power source. When installing, you must strictly follow the instructions for accurate operation of the magnetic mechanism.

Unfortunately, locks sooner or later become unusable. Knowing the structure of the main types of constipations, installation and removal methods will allow you to try to fix them yourself, with your own hands, and also save money and time.

Reader question: how to disassemble a door lock with round handles?

First of all, you need to take care of removing the handle itself. To do this, you need to find and unscrew the mounting screw from the side or bottom using a screwdriver or hexagon. If there is a decorative trim, remove it and unscrew the mounting screws. Then you can remove the handle along with the axial part. This will give you access to the lock mechanism.

The need for urgent removal of the locking mechanism does not arise very rarely. You can lose or break the key, you can break the lock itself, you can find yourself in a situation where a room locked from the inside needs to be unlocked urgently - in all cases it is necessary to remove it. Everyone will need to know how to remove a door lock from an interior door.

How to remove the lock?

Types of locking mechanisms

As a rule, the locks installed on interior doors are quite simple, so there are no big difficulties in removing them. Well, how to dismantle them sometimes becomes clear from the design.

Most often, the following devices are found on the door as a locking mechanism.

Option with a halyard tongue and a handle - the latter can be round or regular. When you press it, the tongue moves back and the door opens. In round knobs, quite often there is an additional mechanism for locking from the inside. The photo shows a version of the device.

Latch – by default it has a device that is locked from the inside. There is a keyhole or plug on the outside. As a rule, bathrooms and toilets are equipped with such a door mechanism.

A device with a secret lock is an analogue of a full-fledged locking mechanism for an entrance door, only somewhat simpler and lighter. Rarely used because it is much more difficult to remove when locked.

Dismantling the device with a handle

The DIY procedure is simple, you just need to make sure you have a screwdriver.

First, dismantle the handle itself by unscrewing the screw at the bottom or side with a key or screwdriver. For round models, you need to use a special key that locks the spring-loaded pin.
Then remove the cover and unscrew the mounting screws, as shown in the photo.
Then you need to remove the lock handle from the interior door along with the pin. This gives access to the locking device. If you just need to open the interior door, squeeze out the tongue. If the device needs to be removed, proceed further.
Unscrew the fasteners from the end side and remove the plate.
Then the entire mechanism is removed along with the tongue: pushed inward, removed through the hole made in the door leaf.

How to remove a lock from an interior door with a latch

The principle of operation is almost the same, so it’s not difficult to do it yourself.

The masking cap is unscrewed from the plug side. Sometimes it can be secured with a latch.
Then unscrew all the remaining fasteners from one side and the other of the door leaf.
Take out the mechanism.
Unscrew the plate from the end side and remove the locking mechanism by pushing it inward. If the lock is connected to the latch, both parts will have to be completely disassembled.

Both lever and cylinder mechanisms are removed in the same way, although their dismantling takes more time.

The video demonstrates in detail how to remove a lock from an interior door.

Despite improvements in locking mechanisms, the use of innovative technologies and ultra-reliable raw materials, they still sometimes fail. In this case, they must be dismantled in order to install a working device in place of the broken mechanism.

In this article we will talk about how to remove a door lock. Let's consider the process of dismantling two types of locking devices:

mortise;
invoices

There is no point in talking about them, since to remove them you just need to unlock the mechanism, pull the bow out of the groove and turn it in any direction.

Removing the mortise lock

First, let's look at how to remove a door lock mortise type, since it is generally accepted that its dismantling is quite difficult. We will try to convince you otherwise. To remove the lock, you only need a screwdriver (flathead or Phillips, depending on the type of mounting screws used).

So, to dismantle the lock, you need to unscrew all the fastening screws located on the bar at the end of the door leaf. If a lock is installed without handles and a fixed cylinder, then in this case it is enough to pry the bar at the end of the door and pull out the mechanism.

However, most have a cylinder - a secret part of the lock, through which it is locked and unlocked. To remove the cylinder, you need to remove the screw, which is also installed in the end part of the bar. It is much longer than regular mounting screws because it goes through the mechanism of the device.

After unscrewing the screw, press on the cylinder (on either side of the door leaf). Usually it comes out without any problems. In some models it has a certain protection, which can only be removed by setting the internal secretion in a certain position. To do this, insert the key into the keyhole and slowly turn it until you find the position you are interested in.

Next we will consider how to remove a door lock mortise type, if it has handles. After all, handles can interfere with dismantling the lock, of course, if they are provided for in the locking design. The handles are placed on a through pin, usually square in shape, and secured to it using a special locking screw. Unscrew it and remove the handles, remove the pin from the lock.

Another reason why it is not possible to remove the lock from the door may be decorative linings, the screws of which are screwed directly through the door leaf into the lock body. If there are any on the lock, unscrew the screws and remove them. This was the last possible obstacle on the way to completely dismantling the lock from the door leaf. You can now remove the device from the end of the door.

Removing the padlock

In this part of the article we will talk about how to remove a door lock overhead type. Dismantling it requires even less time and effort than removing a mortise device. All overhead models are screwed directly to the door leaf using ordinary screws or self-tapping screws. To dismantle the device you only need to unscrew the fasteners. After this, proceed to removing the plate covering the keyhole. That's all! The lock has been removed.

Be careful!

As already mentioned at the beginning of the material, the main reason for dismantling the locking device is its breakdown. Therefore, when purchasing a new lock, pay attention to several main factors:

burglary resistance class;
durability;
performance characteristics;
the name of the brand that released the model you liked.

This will help you choose a really high-quality locking mechanism that will function properly for many years, saving you from having to look for information again, how to remove a door lock.

We wish you good luck in dismantling the old constipation and choosing a new, high-quality model!

In this article we will look at information, videos, photos on how to replace the lock on a door. After we study this method, we will learn how to remove the lock with our own hands.
2 types of fastening (the ones I came across):

1st (probably not your option) on the door there is a decorative disk of 2 halves, turn it approximately 20 degrees and it detaches and separates, exposing two fastening screws;
2nd option (I think yours) there is a small hole at the base of the ball (handle) on the button side, a round rod (an awl or something of the same size) is inserted into it and the handle is removed, then follow the procedure from point 1 (only the disk is solid. But if you use force, the handle easily breaks.

I would also like to note that all locks of this type cannot be repaired, they are for one installation only!

Removing and disassembling the door lock

In order for door locks, even the best ones, to serve for a long time and reliably, they need proper care. This is an axiom (by the way, applicable not only to the topic of “door lock design”, but also to many others). Proper care involves regular cleaning and lubrication. Sometimes this requires removing and disassembling the lock. Depending on the type of locking mechanism used, the procedure can vary greatly.

Typically, when locking apartments and houses, the following types of locks are used:

mortise;
invoices;
mounted;
lever mechanism;
cylinder door lock mechanism.

So how do you remove a door lock?

If the door lock is clamped into the door using two connecting screws, carefully unscrew them, pull them out and disassemble the product. Sometimes the connecting screws may be covered by the door handle trim. In this case, to remove the handle, insert a sharp tool into the slot of the lock and use a screwdriver to remove the decorative trim.

If the cylinder lock is not working properly, you should first apply lubricant directly into the keyhole, insert the key and turn it several times to distribute the lubricant. And only if this does not help, proceed to removing the lock.

Typically, the kit includes instructions for use, which contain a detailed diagram of the door lock. In accordance with it, we carefully disassemble our device. Attention! When disassembling complex locks yourself, you should accurately remember the sequence of removing each element (latch, bolt, spring). It would not be amiss to lay them out in strict order as they are removed.

Necessary adjustment of door locks

When reinstalling the lock in place, carefully check and adjust the movement of all parts; The connecting screws should be tightened carefully, without overtightening them, otherwise the lock may begin to “stick.” Careful adjustment of door locks will ensure their continued good performance.

You should choose a specialist very carefully, based on reviews from friends and the reputability of the company. Sometimes it is cheaper and easier to buy and install new locks. However, if the design of the door lock is really complex, it is better to turn to specialists, but in fact, disassembling the lock is not difficult.

Below we post a full photo report of how you can remove the lock and door handles from an interior door yourself and there is nothing complicated about it.

Anyone can remove a lock from an interior door. Leave your feedback on the article, and also ask questions, if something is still unclear to you, we will definitely advise and help you.