Plastic pipes are successfully used in the installation of plumbing, sewerage, heating systems. They are usually bought in specialized stores. The cost and ease of processing made such materials popular. For construction or repair work, they are taken with some margin, and after completion, unnecessary pieces remain. So what can be made from these scraps of plastic pipes?
Material and its qualities
PVC pipes and the remaining mounting elements will be successful crafts. A zealous owner will not throw them away, clutter up a balcony or cottage with them. After the plumbing is done, the skill of processing and docking will appear. Why not use it in creating useful things, improving living space. Fantasy, skillful hands and ideas in our photo tube crafts will inspire you to create unusual items.
The main advantages of pipe materials:
- price, PVC pipes are inexpensive, and you have already paid for trimming, you may have to buy connecting elements;
- environmental safety, plastic water pipes are completely neutral, do not corrode;
- the strength and light weight of the structures are ensured, which is undoubtedly convenient;
- appearance, white plastic looks good in any modern interiors;
- service life - manufacturers confirm the half-century life of pipes;
- ease of assembly and disassembly, if necessary, repair of structural parts.
Processing features
The manufacture of any crafts requires accurate measurements and accurate cuts. This is mentioned in every pipe craft master class. Three rules for working with plastic must be observed:
- Measure the length of the segment with a tape measure, be sure to mark with a marker.
- Cut the marked area with a knife.
- Fix the pipe before cutting it with a hacksaw or pipe cutter.
Connections are made easier if the pipes are cut at right angles. Fasteners that are sold in hardware stores are designed for such an angle.
Cut and clean the cuts so that there are no nicks and chips.
Pipes can be bent. To do this, they are heated with a building hair dryer or, with caution, with a gas burner. The heated pipe is bent according to the template, fixed and left to solidify in this form.
How and what to connect
PVC pipes have become popular due to the ease of installation and assembly work. To connect them, you need corners, couplings, crosses. They are fastened either by hot soldering using an “iron” or simply with glue and self-tapping screws.
If the design does not require tightness, then soldering the pipes is not necessary, and without it it is also easy to disassemble the structure. This technique is used when creating greenhouses, when they are mounted for the spring-summer period, and then dismantled for the winter and stored in this form.
Crafts from plastic pipes
Products made of PVC pipes according to the assembly methods are divided into two types:
- collapsible, this is a kind of constructor that is assembled and disassembled many times;
- not collapsible, they are assembled once.
In the first case, such structures are assembled for the season or if necessary. Interesting crafts from pipes for summer cottages - greenhouses, gazebos, pools, or folding chairs and tables for hiking in nature are examples of collapsible crafts. Lightweight, durable and useful products are easy to assemble and disassemble.
In non-collapsible crafts, pipes are fastened with glue or screws. Short cuts are easily connected into simple bookshelves, coasters. Try your hand at assembling elementary structures, look at the result and be inspired by it to create products in a minimalist style with original ideas for pipe crafts.
Armchairs, chairs will update the interior of the apartment. And if you have basic knowledge in the field of electrical engineering, then you can assemble unique lamps - a wall lamp, a table lamp, a chandelier or a floor lamp.
Very short remnants up to 10 cm long are well suited for designer organizers. Tools on the wall of the workshop, stationery on the desk, even cosmetics in the bathroom will find their place in them.
Assembly example
Let's show how to make crafts from pipes with your own hands using the example of a mobile clothes dryer. The simplest form resembles a folding easel. The dryer is made from two rectangles of the same height but different widths. The inner rectangle is already made by 10-12 cm. The widest place of the dryer was 80 cm, but you can do it at your discretion.
For its manufacture you will need:
- all pieces of pipe with a diameter of 25 mm, legs 60 cm long 4 pcs, 20 cm 12 pcs, crossbars of the base 80 cm 4 pcs, crossbars of the inner rectangle 70 cm 3 pcs;
- connecting corners 2 pieces;
- tees 12 pcs;
- clamps 2 pcs.
The procedure for assembling the structure
We make dryer racks from segments 20 cm long. To do this, we vertically connect 3 such pieces with tees. We get racks a little higher than 60 cm. Insert the legs from below, we get 4 racks 120 cm high. We connect two racks with a wide crossbar using corners.
We insert the crossbars into the free horizontal holes of the corners, we get the main and inner rectangle. With clamps we fasten the inner narrow rectangle to the upper crossbar of the base.
The dryer is installed as the letter “L”, for stability, you can adjust the angle of the rectangles. Laundry is hung on the crossbars, you can put the dryer in any convenient place. The assembled structure is easily hung on the wall in the pantry.
Important: Similar step-by-step instructions showing how to make pipe crafts are easy to find on the Internet. The use of leftover plastic pipes is not limited to the ideas presented, this material can really be used in your own home workshop.
Photo crafts from pipes
Creative owners will always find original uses for ordinary things. It is not often possible to find crafts made from plastic pipes, but it is this material that gives scope for imagination and often saves the situation in a seemingly hopeless situation. Easily bent, easily cut, quickly mounted pieces of plastic pipes can be turned into the most unexpected design. These can be DIY crafts made from polypropylene pipes, such as a flower stand, a bush holder, a bookcase, a rack, decorative decorations for the home or garden, and even a plastic pipe fence or a pipe chair.
To obtain bent or flattened structures from polypropylene pipes, the material is heated, and while the pipe is hot, it is deformed in the right places and directions. It is very convenient to heat pvc pipe sections with a gas burner, but an ordinary gas stove is also suitable. They cut the details of water plastic pipes with a hacksaw, grinder or jigsaw - manual or electric. Advanced home craftsmen connect homemade pvc pipes with a special soldering iron, and a synthetic adhesive is also suitable for simpler bonding.
What can be made from plastic pipes
If desired, and with a good imagination, crafts for giving from plastic pipes can take up a significant part of your household, both in the house and in the garden or in the garage. Products of different sizes and diameters can be bought at any construction market: their usual purpose is water and sewer lines, heating and irrigation systems, and it often happens that after the main work pieces of polypropylene pipes of different lengths and diameters remain. If you haven’t thrown them away yet, then you can make very original and even useful crafts from plastic pipes with your own hands.
For the manufacture of artistic items, segments of polypropylene pipes are best suited - they are rigid, they can be easily connected to each other using nozzles and adapters, so that the structure can later be disassembled. Trimmings will also serve well for a summer cottage or a playground, a children's room or an auto repair shop. The main thing is to see how they can be used. Polypropylene products are well connected by soldering: a non-separable, but very strong and durable construction is obtained.
Connection options
You can make plastic pipes with your own hands not only for crafts for summer cottages, household items or furniture, but also for more complex designs. The main thing is to firmly connect the parts of the product. Connect them in the following ways:
- One segment is inserted into the socket of the other through a rubber seal;
- Blanks of plastic pipes are connected with glue;
- Details are connected to threaded hardware.
The first option is the simplest, but not reliable and tough enough. Contact surfaces must first be cleaned of dust and lubricated with silicone or graphite grease (you can even use soapy water or liquid detergent). The segment is inserted into the socket to the end, and then pushed back a few millimeters.
This design of water pipes can be easily disassembled, so it is suitable for seasonal use: this is how you can make children's swings, chairs, water pipes for the garden, etc.
The second option is more reliable, but more labor-intensive. Before gluing sewer plastic pipe trimmings, the joints are also cleaned, sanded with fine sanding paper and degreased with a solvent or methylene chloride. Glue is applied to the entire outer surface, and to 60% of the inner surface of the parts to be glued together. Then the products are inserted into the socket and rotated 90 0. Methylene chloride dries quickly - 60 seconds, so gluing must be done quickly.
The third option is to mark the products and drill holes for the bolts. Such DIY pipe crafts are considered the most reliable, and they can always be disassembled for storage or rework.
To connect the corners of structures or several segments in one place, fittings are used - tees, adapters, couplings. Therefore, structures of any complexity can be made from PVC or propylene pipes. Consider crafts for children and adults that you can make with your own hands from pvc pipes.
Little things for the interior
- From scraps of products, you can design an organizer for an office or workshop. The reliability of crafts is determined by the connection options: self-tapping screws to the surface of a table or wall, or gluing structural parts together. The first option will be stationary, the second - mobile (portable). It is better to take pipelines of white or gray color;
- From plastic pieces of small diameter you get a beautiful and original stand for a tablet or netbook;
- What else can be done from pipes? For example, modern or high-tech book shelves, photo frames or mirrors;
- From scraps of large diameter you get a shoe shelf with compartments, from pieces with a smaller diameter - a flower stand. In order to make flower pots with your own hands, you will need products of a very large diameter - from 100 mm and above. Such country crafts made of polypropylene pipes can be placed both in the house and on the street; Usually these are sewer elements;
- A floor vase of any length, decorated with any patterns, can even serve as a gift to a friend. To make a vase, take pipes for plumbing or sewerage systems of medium diameter, and you can make such a type-setting vase - insert cuts one into one, using each next segment of a smaller diameter;
- An indoor or outdoor spotlight with a minimum of decorations will perfectly fit into a techno-style interior;
- A hanger, a holder for things, a chair or a table, a rack, a shelf, a bookcase, a shower, a watering can - there are so many ideas for a country house that you won’t remember everything, it would be a fantasy;
- A garden house can be equipped with a homemade storm sewer from pipes, sawn in half lengthwise, and connected with glue or bolts into one long drain gutter.
Crafts for the playground
Original crafts made of PVC pipes will also turn out for a yard playground: a small playpen for a baby that develops a collapsible rug, light swings for children up to 5-6 years old, plastic sleds of an original design, collapsible goals for playing hockey or football, a small playhouse, an outdoor shower stall for summer use, a theater screen for impromptu home theater performances, and much more.
A playpen made of plastic pipes can be assembled in a couple of hours if you have a special soldering iron. You will only have to buy the required number of corners and crosses for the segments to connect the partitions to each other. The design is simple in that it does not need to make a floor.
Plastic swings must be assembled from polypropylene pipes with a diameter of 32-55 mm, or from metal-plastic pipes of large diameter. For structural rigidity, metal rods of a suitable diameter are inserted into the supporting pipes - they will not make the portable structure too heavy, but will make it as safe as possible for children. For a chair of such a swing, you can cut a sheet of OSB and bolt it to the frame. To make a stationary swing with your own hands, it is enough to drive iron bars into the ground, on which the main skeleton of the structure will be mounted.
The sled of their PVC pipes looks very original, and the same OSB or chipboard sheet will serve as a seat for them. Due to the short length of the connected segments, such sleds will turn out to be very durable. You can bend polypropylene segments on the front of the sled with boiling water - you need to lower a piece of pipe into boiling water, hold it in it for 20-30 minutes, and then, until it has cooled down, put the pipe on an iron rod and quickly bend it as needed . Leave for a few hours to cool, and the bent element of the sled is ready.
A playhouse made of plastic water pipes can be complicated to a castle - make a drawing, and your kids will have a transforming house from which you can assemble anything - from a swing to a crib. The roof and walls of the house are made of dense fabric or opaque polyethylene. And so that the children feel in such a house, as in a real one, put lighting there and make furniture - two or three chairs, a table, a cabinet. Children will be interested!
It’s quite simple to make a shower - assemble a quadrangular frame on the squares, and you don’t even need to mount a sprayer - it’s enough to drill many small holes along the long sides of the upper pipes through which water will create many jets. And the pipes of the frame made will serve as a water route - connect water from a house or an outdoor storage tank with a pump to create pressure to it. And if you make this structure higher, then you yourself can freshen up in it.
PVC pipe furniture
Despite the fact that furniture made of propylene or PVC pipes seems fragile and unreliable, it is still worth trying to make a couple of pieces of furniture to make sure the opposite is true. In addition to the original appearance, such light garden or country furniture for a gazebo or pavilion will save your family budget well.
It is impossible to imagine a gazebo without chairs or a bench, so start by designing a chair. The chair can be made anything - folding, low, with or without a back, in the form of an armchair or ottoman, a highchair for feeding a baby, a deck chair, etc. And do not limit yourself to using pipes alone - use everything that seems suitable to you in the design. So, for the chair seat, you can fix foam rubber on plywood and cover it with polyethylene, or you can use pieces of rubber in the form of crossed ribbons instead of plywood (this is how almost any chair works), and the chair will become soft and comfortable.
Here, in the gazebo or on the veranda, you can put a bed for children - single or bunk. You will understand the principle of assembling furniture immediately after you sit on the first chair assembled with your own hands - the same techniques are used when assembling any pipe structure. The benefit of such details and interior items also lies in the fact that they can be disassembled at any time in order to assemble something else that is relevant at the moment.
For example, no one will call a glass coffee table homemade if it is assembled carefully and according to the drawings - all the details for it look elegantly processed, and the masking of the connecting seams and holes will make such a table indistinguishable from the factory one. And do not forget about the main thing - any of your products will always be made in a single copy, that is, it will be only your design work.
Even in a house built according to an original project and furnished with chic furniture, you can put lightweight furniture made of pipes, and it will not spoil the interior. For example, a rack in the hallway or a hanger in the hallway will look very unusual.
Useful crafts for home and garden
If you didn’t buy a country or country house, but built it yourself, then at the end of the work you will definitely have a lot of unused building materials that can be used along with scraps of metal-plastic, PVC or propylene pipes. And, if crafts from pipes are not always in place to decorate or improve the functionality of the interior, then they will definitely find a use for themselves on a personal plot, especially since their appearance will be original, neat and beautiful.
Do you have plastic pipes left after installing the water supply network and are now taking up space in a closet or garage? Agree, it would be nice to make something useful for the home out of them. But you do not know where they are best used and what good can come of them?
We will give you a solution - the article provides ideas for useful devices for the home. Moreover, it is not difficult to make original and useful crafts from polypropylene pipes with your own hands. It is enough to take the remains of pipes and use ready-made ideas, or show a little imagination and create a unique product.
The article discusses the main tools and materials necessary for work, provides photo illustrations of useful and simply interesting homemade products. As well as video recommendations for the manufacture of products from propylene.
If you don’t know what you can do with your own hands from ordinary plastic pipes and what materials you will need for this, we suggest that you look at a photo selection of interesting ideas for various home-made devices for home, summer cottage, apartment.
Group #1 - functional crafts
Various products made of propylene can become an essential part of the interior or even its highlight. The main thing in this business is to show imagination and approach the creation process creatively.
When making the homemade product needed in the household, it is not necessary to leave the real color of the pipe - it can always be repainted, supplemented with other materials.
As a result of such manipulations, the product will acquire a noble appearance, and no one will even suspect a banal pipe in a pretty little thing.
Image gallery
In the modern world, with its developed industry, there is room for a creative solution to any household problem. Plastic pipe crafts have become a tool for making fantasy come true in decorative arts and engineering, right down to carports, greenhouses, swings and more.
What can be made from plastic pipes
Products made of plastic pipes, due to their lightness, flexibility, strength and ease of assembly, have become a real storehouse of ideas for the creativity of many modern "Kulibins" and "left-handers". With the help of pipes, you can make furniture, garden and garden accessories, interior elements, entertainment for children, and even weapons with your hands. And it's not just the low price and availability of materials. The fantasy of people is constantly being embodied in new forms. The following is a selection of the 50 most interesting projects.
How to shape plastic pipes
Pipes can be given almost any shape, because they are interconnected and bent. For example, if you need to make a vault for a canopy, they may well be bent to a given radius, it depends on the diameter and thickness of the walls.
Homemade plastic pipes require the material to be given certain shapes. This is achieved by heating the material. For heating, a building hair dryer or a gas burner is used. It is necessary to warm up the plastic surface and while it is hot give it the desired shape. If there is no burner, you can heat the material over the fire of a gas stove. For not strong heating, it is enough just to fill the pipe with hot water.
The heated plastic is very soft, so special attention should be paid to creases in the bends. Cut plastic with a hacksaw or jigsaw.
Connection options
There are several ways to connect pipes for homemade products:
- Socket connections. In order for the inner pipe to fit tightly and not dangle, a rubber sealing ring is installed inside it. Also, chamfer the smooth end and grease its tip with silicone. Such a connection is considered not very strong, but it is easy to disassemble. With its help, collapsible home-made structures are made, for example, garden furniture that is removed from the yard for the winter.
- The second type of connection practically does not differ from the first, except that glue is used for the connection. In order for the segments to adhere better, it is necessary to thoroughly degrease the parts to be joined before applying the glue.
- Fitting. may be detachable or non-detachable. With the help of couplings, it is possible to fasten sections of pipes of different diameters and even materials. Most often, inexpensive plastic compression couplings are used for homemade products. For fastening in places of bending of the structure, you can use another type of shaped elements - bends, tees and crosses.
- Heating device ("palnik" or "iron"). It has little in common with well-known household appliances. This is a special machine for welding plastic pipes. The products to be joined are placed in the clamp of such a heater and stick to each other in a few seconds. This is the fastest and most reliable method, all joints are neat and tight. The only bad thing is that this heater is quite expensive and it is unprofitable to buy it for the sake of one craft.
- Use of flanges. One flange is put on the connected ends, which is a sleeve, slightly larger in diameter than the pipe itself, with a thick washer with holes located at one end. After the flange is fixed on each segment, they are connected using bolts passing through the holes in the washer. For waterproofing, wide rubber gaskets are used. Not the most popular type of connection for homemade products. Flanges make the appearance of crafts more rough, not neat. But if brutality is inherent in the design of a homemade product, such connections will reveal the master’s intention in the best possible way.
To enlarge images, click on the photo.
garden arch
Arches are used to decorate the yard or garden plot. Very often they are used as an element of decoration of festive events. The upper part of the arch is assembled from curved pipes. To facilitate bending, you can heat them with a gas burner flame, but it is best to fill them with boiling water and bend them slowly. The upper part of the craft can be made using collapsible fittings. In this case, we get a folding arch, which is convenient to store and transport.
Privacy corner in kindergarten
According to the recommendations of the Federal State Educational Institution, the Center for Solitude and Relaxation is becoming a mandatory attribute for kindergartens and other preschool educational institutions. The frame of a privacy corner made of plastic pipes can be in the form of a house, a tent or a mink. Inside you need to put pillows, soft objects, plasticine, pencils and paper, toys that develop and distract attention. Outside, the craft is covered with a fabric of calm, not flashy shades. it is preferable to use materials of pastel colors. All this will allow the baby to relax a little, wait out the stress, distract from troubles and soon return to the group with his comrades.
Scuba for beach search
A beach scooter is used to search for small objects in the sand - coins, watches, chains, shells, and so on. It resembles a scoop with small holes in the bottom. To make a scuba, you need a piece of plastic pipe with a diameter of at least 100 mm, in the lower part of which you need to drill holes for the exit of sand, and make a handle in the upper part. The photo shows a homemade scooter for the manufacture of which a tap to a smaller diameter, a plug and a thin piece as a handle were successfully used.
Embroidery machine
Another interesting craft made of PVC pipes. In fact, this is a frame on a stand, designed to stretch the fabric on it. It is made of pipes connected by bends of 90 degrees. This allows you to make a geometrically correct square or rectangle. The angle of inclination is adjusted using a loose socket connection of the tee in the frame and the outlet in the stand.
Well from a pipe of large diameter
A plastic well is the easiest use or PVC. First, a hole is dug that reaches the level of groundwater. Then PVC of the appropriate diameter and length is placed in it to prevent the earth from shedding. A deep pump can be placed in the well and supply water to the house directly from the tank.
Swing for children
A swing made of plastic pipes is unlikely to withstand an adult. But for children not exceeding 20 kg, this is a completely feasible undertaking, and most importantly, it is safe. Swings can be installed in the yard and in the country, disassembling them into their component parts with the advent of winter. The photographs show two swing options - for the street and for the house. Compact home swings do not require any additional materials - only PVC pipes remaining after repair were used in the homemade product.
Child chair
A light chair made of plastic pipes and a cut of bright dense fabric will surely appeal to children. It can become a piece of furniture in a children's house or be used as country furniture. Remnants of PVC pipes, 90 degree bends and tees were used for the manufacture. The frame is fixed with glue.
Drilling machine
An electric drill or screwdriver is a tool that can always be found in a home master's locker. Of these, you can make a home drilling machine. You just need to fix it on a movable bracket. This will make the holes even, at a given distance from each other. Such a homemade product can replace a heavy and serious drilling unit. But it will require hard work. Without precise fitting and reliable fastening of the knots, one cannot do here.
Bed for strawberries in plastic pipes
The craft is a thick plastic tube with holes for plants located on top. This method of planting strawberries allows the ripening berries to lie on the plastic, and not on the ground, which makes harvesting easier. In the photo, a plastic pipe is used as the basis for a hydroponic system. Pots are inserted into the holes, to which a nutrient solution for plants is supplied.
vertical beds
This method of planting resembles the Hanging Gardens of Babylon. Pipes with plants sticking out of the holes in the upper part can be placed in several rows. Foliage covers the skeleton, giving the impression of plants hanging in the air. In addition to the original appearance, such placement of plants allows you to get good yields even from small areas. Vertical beds made of plastic pipes can be placed in the narrow aisles of a summer cottage and even on a loggia or balcony of a city apartment.
Fence - fence for the site
This use of pipes is more decorative than applied. Such a fence will not stop intruders, but it will make the backyard or palisade neater and more elegant. Moreover, the craft can be painted in different colors, which will give an additional decorating effect. All that is required for this is all the same trimmings, tees, 90 degree angles and plugs.
Rod-pod - stand for a fishing rod
Any fisherman knows what this device is for, and the ability to assemble it from pipes and carry it with you on a fishing trip makes it also convenient. A rod pod involves several rod supports, which can be easily achieved using short lengths of pipe and fittings. The main focus is to create a durable, easy to assemble and disassemble craft. For the fisherman, you can provide a light chair made of the same material. In the photo - a stand for two fishing rods.
Plant trellis
These are ordinary racks made of thick pipes with thin ones fixed to them horizontally. When building a vineyard, you need to rely on the fact that the load on the racks and crossbars will constantly increase, so you need to take into account the margin of safety for such a homemade product. Don't stop at simple rectangular coasters. The plasticity of the material will allow you to achieve the most bizarre shapes to decorate your garden!
Eaves for curtains from a plastic pipe
A stylish cornice made of plastic pipes can be made from the materials remaining after the repair. Flanges put on plastic brackets will help to tightly fasten homemade products to the wall. The curtains themselves are attached to the rings put on the pipe. Such crafts are recommended for light types of curtains. They will not hold heavy curtain fabrics. Cornices can be painted with metallic paints or left "as is".
Wine rack
A shelf or rack is used to store collection wines. For them, PVC pipe segments fixed in the form of a honeycomb are suitable. At the same time, each bottle will have its own “honeycomb”. The construction is a sawn 35-40 cm straight sections. They can be stacked in any order, fastened together, for example, with glue and filled with collection wine.
Dog pen
It is a frame of pipes of the required diameter, built in the form of a cube. The side walls are also assembled from pipes or partially covered with fabric or netting. This kind of homemade products is also suitable for arranging rabbitries, only a cube of pipes will already have sides of no more than 1 meter.
House made of plastic pipes for children
It can be made with a gable roof, using bends with a 90 degree bend to mount on the roof ridge. The walls of the house can be hung with matter, with windows cut into it. It is not necessary to use a classic-shaped house. Your kids will surely enjoy building in the shape of a pirate ship or a space rocket.
Partition of plastic pipes (screen)
The partition in the photo consists of 3 frames with an opaque material stretched over them. The frames are connected to each other by a movable hinge, which allows you to fold and remove the screen when not needed.
Support for bushes
This design resembles a support for a vineyard, only on a smaller scale. It supports plants and directs their branches in the right direction. With a little imagination, you can make, for example, a Chinese rose grow in the form of an arch around the gate.
Barrier for doorway
Such a fence will be useful in homes where there are small children or pets. On both sides of the opening, tubes of a slightly larger diameter are attached, into which the frame is inserted, as shown in the photo.
Polyethylene pipe bow
We use the elasticity property of a plastic pipe to create a children's bow for shooting. We wrap the neck (handle) with a piece of pipe insulation and fix it with adhesive tape. A string of fishing line is fixed in a groove at the ends of the pipes, which end with plugs. Do not get carried away and give the craft too large a bending radius. Leave some headroom for the limbs of the bow when drawing and shooting.
Fixtures
Homemade pipe lamps amaze with the number of shapes and sizes. It all depends on the imagination of the person. The photo shows only a few homemade products of various types. The main thing when assembling a lamp from plastic pipes is to thread the electric wire in time so that you don’t have to suffer with it later, because the design can be quite complicated.
Clothes dryer
Of course, such a simple thing is usually bought at a hardware store. But it is much more pleasant and cheaper to use a homemade dryer. The assembly diagram in the photo does not require explanation.
flower pots
The simple design of the planter allows you to arrange flower pots not corny - on the windowsill, but in beautiful coasters throughout the house. Now you can not be afraid of puddles on the floor and walls resulting from the overflow.
Homemade sled
This homemade product is quite difficult to build, we do not recommend using it as your first pipe craft. But with a little experience, making strong and light sleds is not difficult. Very comfortable, fun and beautiful.
Towel dryer in the bathroom
Making a heated towel rail from a polypropylene pipe with your own hands allows you to create a non-standard design for placement in places for which it is impossible to pick up a finished model. The functionality of such a homemade product is much higher than the usual factory one.
mobile tent
This is the same orphanage. But in this case, all connections are made with the expectation of easy assembly and disassembly. Very practical thing - does not take up much space, light and comfortable. Attention to tight-fitting fabric - it must be strong enough and waterproof to resist the vagaries of the weather. The craft can be used to organize a camp kitchen or protect from the sun.
Football goal
To play ball or field hockey, it is not necessary to have large iron goals. A fairly light construction made of PVC pipes, which is also easily disassembled with the advent of winter. Although small gates can be used in winter for playing ice hockey. The craft usually consists of 3 frames, but you can simplify it to 2 or even to one frame with a fabric stretched over it.
Clothes hanger
It is a vertical tube with small “outgrowths” on top for clothes or a full-fledged structure for a dressing room with horizontal pipes to accommodate a large number of things on a coat hanger. The photo shows a homemade hanger for children. For adults, the craft should be more durable and use pipes with a slightly larger diameter.
solar collector
Device for heating water. You need to place it on the roof and the longer the pipe, the more efficient the heating. Therefore, usually the "snakes" of the collector from plastic pipes are laid over the entire roof area.
Flower pots and vases
These crafts can be made from pipes and fittings of various diameters by simply sawing off a piece of the desired height. It is customary to decorate finished crafts with colored paper, and you can place them on a flower shelf previously made of PVC pipes.
Stand for kitchen appliances
Knives, forks, spoons of various sizes can be inserted into vertically mounted pieces of plastic pipes. Crafts are very convenient, and most importantly practical. Look creative in the kitchen. Your guests will be pleasantly surprised.
Pencil scissor stand
Pipes of different diameters fastened together, placed vertically, are a good storage not only for scissors and pencils. For compactness, they should be fastened into one block. It can be quite a functional desk organizer.
Holder for curling iron or hair dryer
Pieces of PVC pipes fixed in the bathroom will securely hold curling irons and hair dryers, and they will not melt when in contact with hot elements of appliances.
Watering hose holder
So that the hose does not lie in the form of an untidy, unraveling pile, it can be wound on a do-it-yourself PVC pipe holder. Practical and convenient homemade for the backyard.
Picture frames and mirrors
An original and even brutal device for storing photos, edging paintings or mirrors. Looks very impressive and unusual.
Bench made of PVC pipes
Pretty simple, but you need to use good glue for the connection, because the shop should not only be beautiful, but also durable. A shop made of plastic pipes for a summer residence is cheap and tasteful.
garden bench
By complicating the design of the bench, you can additionally make the back - it turns out a very beautiful bench. You can use tubes of different diameters, for example, 50 mm for the side supports and 25 mm for the back and seat.
seedling containers
In fact, these are small flower pots or simply sawn 5-7 cm pieces of the desired diameter. An excellent solution to the problem for those who have plastic scraps left after repair.
drip irrigation system
The practical direct purpose of a plastic pipe is water supply. Drip irrigation occurs through small holes that are drilled at predetermined distances. Now you can not worry about watering the site in between visits to the cottage. And flooding the roots with large volumes of water also no longer threatens you.
Desk organizer
The device consists of segments of PVC pipes of different diameters and heights glued together. Looks creative on the table, suitable for home and office.
Bathroom organizer
Convenient storage for toothbrushes, shaving accessories and other small items. And for each device will have its own separate cell. Looks great in the bathroom with other PVC crafts like towel warmer and mirror frame.
Shoe rack
Convenient storage, made of fragments with a diameter of at least 100 mm. The shoes are no longer standing under the door, but neatly folded on the shelf. Moreover, you can make as many levels as you like.
Glass holder
Installed above the bar. A large-diameter pipe is mounted horizontally and a cutout is made wide enough to pass through the thin stem of the glass. A great addition to a loft-style interior.
Place for bicycles
Homemade for holding the front wheel of one bike, and for 5, 10 or more. The number of cells corresponds to the number of bikes in the family. Do not forget about possible guests on two-wheeled vehicles. The craft is easy to disassemble for the winter and hide in the pantry for the next season.
Drill stand
The stand represents a cut in which the tool is placed so that it does not have to be looked for or it does not interfere during repair work, lying underfoot. Comfortable and most importantly practical.
Outdoor cinema screen frame
The frame of the screen is created by a frame made of PVC pipes with a white sheet stretched over it. Just think about the legs of the tripod. Ready-made factory options are not cheap, and a do-it-yourself screen will cost a penny.
Homemade catamaran made of plastic pipes
Pretty big and intricate piece. All fasteners must be carefully glued so that the catamaran does not fall apart. As floats, it is possible to use hermetically closing segments of large diameter.
Notebook Stand
It is a frame to support the laptop. Such a stand not only allows you to comfortably sit on a table, bed or sofa for work, but also ensures the removal of hot air from the lower and side planes, protecting the laptop from overheating.
Decorative interior elements and gifts
A creative approach will help create truly original things. When making, do not forget to decorate crafts with colored paper or paints.
Working with plastic pipes is not just a pleasure to create. This is the embodiment of the most daring ideas and fantasies. In addition, you do not need a special tool for work, sometimes a simple hacksaw, ruler and felt-tip pen are enough. Crafts can be done by the whole family, involving children in this. It strengthens family relationships and develops creative thinking.
