Floating cup: original do-it-yourself topiary. Making a “floating cup” topiary with your own hands How to make a craft for a floating cup autumn gifts

Hello! And I’m coming to you with a fruit and berry “spilt”. Well, it’s impossible to resist and not do something like this.

Such a bright floating cup will be a wonderful decoration for your interior and a wonderful souvenir gift for any occasion. The selected composition of various artificial berries and fruits looks beautiful.

Even a novice needlewoman can easily create such a spill; all you need is a little patience and materials to implement it:

• tea pair,
• strong wire (I have a steel hanger),
• decorative fruits and berries,
• any artificial grass,
• adhesive plaster,
• scissors,
• some newspaper
• hot glue gun,
• pliers,
• round pliers,
• decor - optional.

Using pliers and round nose pliers, we bend the wire so that it fits snugly to the bottom of the mug and saucer.

I would like to note right away: since I use a heavy ceramic mug, the weight of which is quite decent, I recommend you the following method of fastening, so that in the future there will be no troubles and the pouring will please you for a long, long time.

I usually use steel hangers; this wire is very strong and easily holds the cup in place. When working, I always use pliers and round nose pliers, it’s more convenient and the wire bends more evenly.

So let's get started...

We bend the wire so that it lies flat on the bottom of the mug and then repeats the bend of the cup itself as much as possible.

Coming out of the cup, we slightly lift the wire up and smoothly bend it down again, so that later our fruit and berry flow will look beautiful and naturally flowing out of the cup, and not behind it.

We decide in what position the handle of the cup will be and fix the wire with hot glue. Fill it well with glue, you will have to wait a little until the glue completely hardens.

At the end of the wire, use pliers to bend a stable “leg”, which will give the cup support. Glue and hold until the glue cools.

I applied hot glue to the area where the wire was raised to further secure it.

We make sure that everything is held tightly and begin to prepare the wire for gluing.

I increased the flow volume by 2/3 using regular newspaper and covered everything with adhesive tape.

Like this…

I first glued artificial grass into the cup and then attached a few berries on top with hot glue...

So, we decorate the entire stream, and then the saucer.

Such a souvenir will not only decorate your interior, but can also serve as an excellent gift for your loved ones, friends and work colleagues.

Have fun creating!

I was glad to help!

And prosperity. Creating a floating cup with your own hands is a creative, very exciting and low-cost process, and its result will delight you!)

The flying bowl looks very attractive and will add additional coziness and comfort to any home or office interior. Can be a wonderful gift for your loved ones and colleagues! Making a floating mug will not be difficult, the main thing is to know the basic principle of its manufacture and pay special attention to details and colors.

Master - Ovchinnikova Yaroslava

Materials

1) tea or coffee pair (cup and saucer)

2) glue to connect the “spouting” structure with a bowl and saucer. It is better to use the universal Moment gel adhesive for ceramics, plastic or glass. An alternative can be any other adhesive designed to work with smooth surfaces. A glue gun is also used, but it is intended mainly for working with rough surfaces. There is a possibility that the cup will come off in the near future after gluing.

3) thick wire, or triple wires. You can use other flexible items, such as old aluminum forks or spoons, or a metal hanger.

superplastic) is a self-hardening thermoplastic. When heated, it becomes plastic and convenient for giving it the desired shape. When cooled, it becomes hard, elastic and durable.

5) painting scotch– they can replace superplastic

6), can also replace polymorphus. It resembles plasticine, but unlike it, it hardens well in air. Contains natural ingredients (dough made from cereal flour), so it is absolutely safe for children.

7) decoration items cups: coins, flowers, cones, feathers, candies, beads, buttons, ribbons and much, much more.

Cup assembly process

The process of creating a floating mug is not at all complicated, but there are several important nuances that need to be taken into account when creating it.

The main secret in creating a flying bowl is to choose the right tea pair. The cup and saucer should not be too heavy. If you take this condition into account, it will be easier to create a flying bowl!

We construct the base of the floating cup; this is the element that connects the saucer to the cup. To do this, take a wire of the required length. It is important to note that the distance between the bowl and saucer should be approximately two cups. With these parameters, the flying cup will look most balanced.

Inside the bowl we form a loop from the wire, the diameter of which should be 2-4 cm. This will help to achieve better fixation of the wire in the cup. We twist the second end of the wire into a flat spiral in two or three turns. This way we will get a kind of stand, which we will fix in the saucer.

The tilt radius of the resulting structure should not exceed 45 degrees, otherwise the structure will be unstable!

Polymorphus is the best material when making a flying cup.

Take a piece of polymorphus and immerse it in hot water for 20 seconds. During this time, the material is converted into soft plastic.

We stick the resulting plastic, like plasticine, around the base, giving it the desired shape. If the plastic hardens before you finish the job, simply dip it back into hot water. The prepared base will completely harden within 15 minutes.

If you don’t have this material on hand, you can use modeling compound. An alternative to these two materials can be masking tape, which is simply wrapped around the wire base. Or you can wrap the wire with felt or other fabric, after coating it with glue.

An important aspect is to constantly try on the base on a saucer with a cup in order to spot any flaws in time!

You should pay special attention to the edge of your cup in the place where the structure will be attached!

In this place it is necessary to make a kind of step in the form of a support. This way the structure will hold much more securely.

When the base is ready, you can begin fixing it on the cup. Lubricate with glue all surfaces of the base in contact with the saucer and cup. Press firmly and hold for 3-5 minutes. Don't forget to glue a step to support the cup!

We fix the flying cup on soft objects in the desired direction and leave it in this position for 5 hours. During this time, the glue will dry well and securely fix the resulting floating bowl.

When the floating cup is well glued, you need to check how stable it is.

If the saucer is not able to hold the cup, then it is necessary to reduce the radius of the structure until it becomes stable.

The last stage of making a flying bowl is the most interesting and creative. Decorating a spill cup! Apply adhesive gel to the decorative elements and glue them.

It is better to glue the large elements first, and glue the smaller ones last. This will hide small visible defects and gaps between elements.

After all the decorations are glued, you need to let the cup stand for 5 hours so that the glue dries.

The process of assembling a flying bowl is discussed in detail in the master class
Hand-made from the Masterclassy website:

Flying mug of flowers

Nata Liana tells how to make a floating cup “Summer Mood”:

Flying mug of fruits and berries

With the help of plastic fruits, berries, and mushrooms, you can create such an abundance of fruits and berries pouring out of a cup. will perfectly complement your fruit and berry

A floating cup can be decorated with bright gifts of autumn. Dried leaves and flowers can also be used. The mug can be replaced with a wooden barrel made from simple ice cream sticks.

Flowers and fruits are harmoniously combined in a floating stream. Butterflies, dragonflies, and ladybugs will be a wonderful “live” addition.

Floating money mug

The floating mug looks very stylish. The design technique of using an unfastening zipper will also add originality to your mug. Keys, bells, old small toys - everything can be used as decorative elements for your mug.

With coins you can also use imitation bills, in which.

The secrets of creating a money mug can be found in the Sveta DIY video tutorial:

The money tap is created using the same principle as the flying mug. Instead of a mug, we accordingly use a plastic tap, and a saucer can replace a small chest or. Coins will look more impressive if they are coated with gold spray paint or varnish.

Master - Anastasia Spitsyna

Cash flows can be depicted using paper bills.

Master - Oksana Ankudinova

How to create a money tap can be seen in the master class
DIY gifts:

Flying mug with birds

The bird is a symbol of lightness and freedom; it is very often found in interior solutions in various styles and variations. This motif is also reflected in the decoration of the floating mug.

A floating mug can become a wonderful house for a nest of birds. The nest resembles a home and an idyll in it.

A cup with daisies and a bird with a nest looks like a real symbol of family, love and fidelity.

A bird with delicate roses, fluttering butterflies and other decorative elements will help create a summer soaring composition.

You can decorate the flying cup with simple pasta. It’s better to take bow-shaped pasta, paint it with acrylic paint, and decorate the middle with pearls. We decorate the mug with them and the waterfall of bows is ready!

This mug looks elegant both in pastel colors and in classic colors - black and white.

Flying mug made of beads

Pearls are the most noble decorative element that will add festiveness and pomp to any craft! A simple white tea pair can be transformed into such a pearl miracle!

A very delicate floating bowl will be made from soft pink and matching pearls. A white dove will perfectly complement the composition).

Beads of different colors will also help create a unique spill cup. Flowers and ribbons of the same shade as the mug will perfectly decorate and complete the image of your cup.

Will make yours more magnificent and elegant:

Handicraft masterpieces cover in their master class how to make an Easter floating bowl:

DelkiRu talks about another type of Easter composition in his master class:

Unusual flying cups

Instead of a flying cup, you can make a flying teapot. This composition will look very original on your kitchen table. When performing such a craft, it is better to choose a teapot of small size and weight so as not to overload the structure. It is better to make a “stream” from a teapot from thin, strong wire (for example, knitting needles) and superplastic.

Hanging flying cups with flowers can become an original decoration! The main thing is to securely fasten them.

A flying mug with different designs can be a wonderful gift for family, friends and acquaintances who are already difficult to surprise with something. The original idea and implementation will definitely make you think about how the cup floats in the air? The finished flying cup (a master class of various manufacturing and design options is presented in the article) will bring only positive emotions to both the giver and the recipient.

Flying cup: master class

Topiary is a small decorative item created from scrap materials: flowers, pebbles, shells, etc. A floating decorative cup would look appropriate in the dining room or kitchen. In this lesson we will learn how to make a topiary with a flying cup with our own hands. We will need the following materials and tools:

• cup and saucer;
• wire;
• hot glue;
• small artificial flowers;
• masking tape;
• pliers;
• scissors.

1. Prepare the cup and saucer: degrease them and wipe them dry.

2. Bend the thick wire with pliers, creating a Z-shape.

3. Align the bottom and top of the wire so that it fits snugly against the saucer and the wall of the cup.

4. Using a glue gun, first glue the wire to the saucer. We don’t skimp on consumables: the glue must completely cover the wire. Hold the wire in the desired position until the glue hardens.

5. Glue the wire to the walls of the cup in the same way. Be sure to wait until the glue has completely hardened: the wire should not lag behind the walls.

6. Cover the wire with masking tape. We did not do this right away, but only after we were sure that the flowers did not stick to the wire.

7. Glue artificial leaves to the bottom in random order.

8. Glue the largest flowers to the bottom of the cup and to the saucer.

9. We create a “stream” from smaller flowers and leaves, gluing both in random order.

It turns out this decorative cup with flowers.

We use kanzashi

To decorate a floating cup, you can also use flowers made using the kanzashi technique. It turns out very original.

Materials:

• thin floral felt;
• sponge;
• aluminum fork;
• coffee or tea pair;
• lighter or soldering iron;
• tweezers for kanzashi;
• stamens and small beads;
• beads, decorative butterfly;
• multi-colored ribbons 5 cm wide;
• glue gun

1. From thin felt or, if there is none, then from ribbon, cut out leaves.

2. Cut the ribbon for the flower. One will need 5 pieces. We collect the sharp petal, but do not rush to solder it. We draw along the line with a soldering iron or lighter.

3. The result is a petal like this. We make the required amount from multi-colored ribbons.

4. We collect the centers of flowers from beads with stamens.

5. Glue the fork with hot glue, connecting it to the coffee cup and saucer.

6. After 10 minutes, apply glue again.

7. We use any heavy object as a load. We knitted old door hinges.

9. We collect flowers by gluing petal by petal to the stamen.

10. Decorate the cup. To begin with, we cover the cup and saucer with leaves, and then gradually cover the entire surface of the saucer, cup and fork with fabric flowers.

It turns out to be such a flying cup.

Money cup in feng shui style

The traditional money tree will compete with a flying cup of money made according to Feng Shui.

To create it you will need:

• coffee pair;
• glue gun;
• coins;
• wire;
• imitation banknotes;
• napkins;
• scotch;
• aluminum wire;
• clear nail polish.

1. Bend the wire and glue it in exactly the same way as in the previous microns.

2. To give the wire the appearance of a waterfall jet, wrap it in napkins.

3. Secure with transparent tape.

4. We begin pasting with coins, moving from bottom to top, as in the photo.

5. To make the craft look neat, first glue the side coins on top.

6. The result is a durable, rather weighty structure.

7. Roll the imitation real banknotes into a tube, fix them with glue and add them to the composition.

8. To prevent coins from darkening over time in the open air, we cover the money stream with transparent varnish.

Try making your first flying cup using our lessons: we are sure that soon all your friends will have different versions of such gifts made by your own hands in their homes!

A selection of videos on the topic of the article