A dummy fireplace made of cardboard. Do-it-yourself desktop biofireplace

Do you believe this cute fireplace is made from cardboard boxes? And this is actually true! Even if your house or apartment does not require a fireplace, you can still create one with your own hands New Year's miracle. Children will be especially happy about such a magical appearance, so let them certainly take part in the process!

What you need for a false fireplace

• cardboard boxes (for the frame);
• glue or adhesive tape;
• material for decoration (paint, colored paper, foam);
• tools (scissors, breadboard knife, brushes, etc.).

Making a fireplace will take quite a lot of time, so it is better to start this in advance: before the New Year. And finding boxes is also not a quick task.

They can be either large equipment (for example, a TV) or small rectangular boxes of the same size. They can be bought in construction hypermarkets (cost from 30 to 80 rubles per piece). Or negotiate with sellers at the nearest store so that they give you unnecessary boxes of products.

As for the decor: it all depends on what type of cardboard fireplace you choose.

Calculation of parts and pattern

The picture below shows the standard size of the portal, however, you do not have to make it the same. It all depends on the number and size of the boxes you choose. You can make both a regular and a corner false fireplace.

If you have big box, you need to mark the portal hole with a ruler and pen, then cut the cardboard with a breadboard knife and bend it into in the right places. The photo example shows a TV box. Corner and regular option.

Small boxes are glued together with glue or double-sided or regular tape so that a symmetrical U-shaped figure is obtained.

How to finish a false fireplace?

Now that the box frame is ready, all that remains is to do the finishing. Most often it is an imitation brickwork. It can be made from red paper. An A4 sheet is enough for three “bricks”. In Ikea you can buy Mola paper in A3 or A4 format, there are a lot of sheets of the same color, it should be enough for a whole fireplace. You can also buy wrapping paper in red or any other color (in Ikea, Leroy Merlin and other similar stores).

The most cool idea: use wallpaper that imitates brickwork or plaster (you can buy the most inexpensive roll and use it for finishing). True, in this case you need to purchase a pack of wallpaper glue that matches the type of wallpaper.

In addition to these options, “brickwork” can be made from a sheet of thin foam plastic (cut into rectangles). In this case, the fireplace will be white (the cardboard base will also need to be pre-painted white).

Another way: make the trim from a laminate backing. It is sold in sheets at hardware stores and looks like the photo below. Happens different colors, but more often beige, which is quite suitable for a New Year's fireplace!

The backing is also cut into pieces and pasted over the frame. This is what it looks like in the end.

And the easiest way: cover with white paper and/or paint the boxes water-based paint. Whatever you choose, we are confident that your fireplace will be unlike any other!

Now it’s time for the most interesting part: arranging cozy lighting (artificial fire). It is probably unnecessary to say that candles with an open fire cannot be placed in fireplaces made of cardboard boxes. Even if it seems to you that they are at a respectful distance from the cardboard. All candles and garlands must be powered by electricity or batteries to prevent fire.

What can you think of:

• Draw a fire with your own hands, cut it out and install it in the portal.
  
• Install LED candles.
  
  
• Use LED strips or garlands.
  
  
  
• Garlands and candles can not only be left open, but also hung with a piece of fabric on which a fire is depicted, or a plain piece of fabric for a more uniform glow.
  
  
  
• Put in the portal Christmas balls and another

We will send the material to you by e-mail

U You always want comfort and warmth, no matter city ​​apartment or a country house. The desire to create a fireplace in the house especially appears when there is snow and a blizzard outside the window. And what could be better than your own fireplace in the house? If you remember about such a desire in the summer, then it is quite possible for residents of a country house to equip it, but the population of high-rise buildings can only dream about it. We have a solution: a less expensive and no less impressive DIY cardboard fireplace (step-by-step instructions included). If this solution interests you, then go ahead... get a large cardboard box. What else is needed and how to do it, we will now tell and show you.

The key and most important thing, without which you won’t be able to create a fireplace with your own hands, even with the most detailed instructions, is a large cardboard box. It can be from a TV, refrigerator, or even suitable from. The main thing is that it meets the following requirements:

• Strong packaging cardboard. It has the necessary rigidity, which will allow you to apply finishing to the future fireplace and make a top shelf.
• Have a large size so that there is room for imagination. If you don’t find a very large box, you will have to limit yourself to a laconic corner fireplace; for this you can take a smaller one.
• The box should be unnecessary. For example, you just bought a refrigerator, then don’t rush to use cardboard for a good cause, because when problems arise with the device, without the original packaging they won’t accept it for warranty, and even if they do, it will probably be inconvenient to transport it.

In addition, you will need the following helpers: masking tape, glue gun, paint primer, stationery knife, ruler, paint brush, sponge for applying relief plaster, acrylic paint, spatula (not wide). These are the basic materials. If you are planning additional, then for these purposes you can use, depending on the fireplace design: polystyrene foam, drywall, baseboards and borders (decorative polystyrene foam), mosaic or any other, tile grout, varnish. For the convenience of cutting all this, use a grinder or jigsaw.

Cardboard is convenient because it can be used to make a structure of almost any shape.

Before starting work

Before you start making a fireplace out of cardboard with your own hands, step-by-step instructions for which are already available, you need to develop the design of the future fireplace, since even the most skillful hands They won’t go purely on fantasy and you need to rely on something before making a fireplace with your own hands from cardboard.

The development of the project includes marking the dimensions of the future product in accordance with the possibilities of its placement, and the following factors must be taken into account:

• If there is little space and there is a free corner, then excellent option there will be a small false fireplace with a corner placement.

Having received information about free space, you can develop a fireplace layout. On a sheet of paper it is worth drawing to scale the height, width, depth of the furnace and its shape. After such detailing, you can begin to work in kind with our box.

Helpful advice! If you don’t have a large box, use several small ones, gluing them together in the shape of an arch-portal.

Fireplace frame

Now comes the most crucial moment: you need to make markings on the box and cut out the components of the future fireplace. The final result will depend on the accuracy of the work at this stage. appearance fireplace Therefore, work carefully, clearly and accurately.

Lay the box on the floor and mark the future firebox and required places bending To avoid confusion, mark the cut line with one color and the bend line with another. In order for the cardboard to bend where needed, you only need to cut upper layer, that is, the paper that covers the corrugated insides. This manipulation will allow you to clearly draw the contours of the future fireplace.

Next, we begin cutting out the firebox. Regardless of what shape you choose for it, the steps to form it are the same. First, cut out the window, then bend its lower part inward - this will be the bottom of the firebox. Next you need to organize the back wall and sides. For the back wall, cut out a figure identical in shape from such cardboard, but you need to make it a little larger, about 5 cm allowances are enough to make it convenient to glue it. We do the same with the sidewalls. Then we collect it all. You can fasten it either with a glue gun, or tape, or a stapler, but always from the inside out. If you plan to organize shelves and niches, then the stage of forming the firebox should be postponed. And carry it out after making the shelves, which are made according to the same scheme as the firebox.

After all the niches are ready, you need to worry about strengthening the structure. To do this you need:

• Place cardboard, polystyrene or other lightweight material under the firebox and shelves. durable material, which would withstand the weight of what is supposed to be placed in the niches.
• In places of probable deformation (at bends), fix the cardboard rolled into a tube: it will give a stable shape to the structure.

Helpful information! For durability and reliability of the structure, it is best to use drywall or. However, these materials require some skills, and gypsum boards will also require the construction of a metal frame.

Adjustment

If you made a fireplace out of cardboard with your own hands, step-by-step instructions for which you had, but there are irregularities and other shortcomings, then they need to be corrected. Putty will come to our aid. But here you need to work carefully. After all, cardboard absorbs moisture, so you need to apply it in parts and on small areas, the second layer only after the previous one has completely dried. There is a little trick that will help if the shortcomings are minimal. Stick regular rough paste onto the uneven areas - it sticks well to the cardboard, and the finishing putty fits just fine on it.

Lid

There is not a single fireplace that is without a cover, and ours is no exception. It must be made from any dense and light material. For example, from thick foam. First, you need to make recesses in it so that the lid falls into place. That is, it fixed the position of the fireplace. Before fixing it with glue, you need to try it on and check that all the protrusions match. If everything is good, you can record it. The joints need to be puttied.

Finishing

The last stage will be finishing. First you need to apply finishing putty using a spatula, and then let your imagination float freely. You can decorate the fireplace with foam borders, which are used on the ceiling. Or make it out of polystyrene foam and paint it accordingly, you can apply an ornamental design and much more. It is better to lay the lid with tiles or paste it over wooden clapboard. The final stage will be to cover all this splendor with varnish in order to fix the decor and give it a finished look.

conclusions

It’s not difficult to make a fireplace with your own hands from a cardboard box, you just need to use the key factors of our step by step instructions and use your imagination. Thus, you can create a truly cozy hearth in any apartment or country house, sit down with the whole family near it and spend a fun evening.

Save time: selected articles delivered to your inbox every week

By technique fire safety Installing a fireplace is not possible in all rooms. To build it, the owner of a private house needs to provide for a lot of nuances, not to mention the residents apartment buildings, which are completely deprived of the opportunity to have a fireplace.
Fortunately, hopeless situations can not be.

People who dream of decorating their interior with a fireplace can afford a bio-fireplace, or false fireplace.

Let's consider making a false fireplace from PVC, cardboard, plasterboard, polystyrene foam and thick paper. Its creation does not involve complex construction processes.

Advantages of a false fireplace made of paper and cardboard

The advantage of any artificial fireplace is the ease of assembly using inexpensive materials. There is nothing difficult in dealing with cardboard and paper. The situation is a little more complicated with drywall and PVC. The use of these materials to make a fireplace requires certain skills and tools. Therefore, most often, in order to avoid complications, a biofireplace is made from cardboard boxes and paper. To create your first fireplace, a beginner will spend no more than 4-6 hours of free time. Upon completion of the process, such a fireplace can be decorated to suit any room. Manufacturing paper fireplace exclusively a design project that will allow you to realize an idea related to arranging a decorative home.

A false fireplace made of cardboard or paper does not heat the room, since it consists of fake elements, but only imitates the original design. But it perfectly hides the visible imperfections of the wall and floor in the place where it is installed. These could be stains, pieces of peeled wallpaper, or something that has lost its presentable appearance. flooring, defects in interior finishing.

Arranging a paper fireplace is not only useful, but also creative. Decorative design You can decorate it to your taste by designing it in accordance with the interior style of the room. Fortunately, this does not require special tools or skills. The ability to make a fireplace with your own hands and use available materials opens up possibilities for imagination.

Making a fireplace out of paper with your own hands

To create a false fireplace, cardboard boxes and white paper are used. Often these materials are combined. Cardboard boxes are used to make the frame, paper is used to make decorative elements. But if you decide to use only paper to create the fireplace, glue it in several layers so that it is rigid and you can shape the fireplace.

To make a paper or cardboard fireplace, the following tools, mixtures and devices are used:

Before starting to make a fireplace, choose a place to install it. The best option placement of the future decorative element - a flat wall without protrusions, not cluttered with furniture. An alternative option is an angle.

Scheme for making a paper fireplace

Now we will tell you how to make a fireplace from scrap materials simply, quickly, inexpensively and beautifully. The entire creation process is divided into several stages.

1. Design

When the location has been determined, you can begin to measure the proposed fireplace and draw up a drawing, in which you should show in detail the design and dimensions of all elements using a pencil and ruler. We do not recommend including rounded elements in the design of a cardboard fireplace, since there is no guarantee that you will be able to draw and cut them evenly and accurately. If possible, it is better to make the drawing on a large Whatman paper. Subsequently, the diagram can be cut out along the contour and placed on cardboard to make it easier to carry the elements, or cut it into individual elements and use them to decorate the fireplace. If there is no Whatman paper, draw on a regular sheet of paper, subsequently checking the dimensions against the drawing.

Usually a false fireplace is not made too large, but one that is too small will look unsightly. Therefore, the average height and width parameters of 70x80 cm are taken as a basis. The size of the firebox is usually 40x50 cm. Deviations from the average parameters are acceptable. It all depends on the wishes of the fireplace manufacturer. Decorative elements are made in arbitrary sizes, also depending on the design and personal wishes.

2. Preparing boxes

To make a fireplace, you can use a large box from a TV or refrigerator. If you couldn’t find a large box, you can use several medium-sized boxes, gluing them together. In the second option, you need to ensure that the boxes being glued have the same dimensions.

3. Creation of the firebox and base

If one large box is used to make a fireplace, the firebox is installed inside it. To do this, using a stationery or construction knife, as well as scissors, cut a hole in the box along the previously outlined lines of the central quadrangle.

There are two ways to cut the firebox:

1. The cutout can be made on the sides and along the top line of the quadrangle. There is no need to touch the bottom line. The base of the fireplace can be formed using a cut piece of cardboard, bending it along the bottom line of the quadrangle. This base can be raised and a picture of burning firewood pasted on it. To form the side walls, additional cardboard is cut out and glued to the sides inside the firebox to create something similar to pillars.
2. IN The cut is made vertically in the center of the quadrangle, as well as along the top and bottom lines. In this case, you can form the side walls of the firebox by folding the cardboard along the side lines. The base is formed by laying an additional piece of cardboard.

To make the cardboard easier to bend, you can draw it along the marked lines with a stationery knife, lightly pressing it.

4. Creating the back wall of the fireplace

An additional piece of cardboard serves as the back wall. It should be wide enough. The size of the fragment should not be equal to the size of the firebox. It is necessary to cut cardboard with a significant margin. The back wall is necessary if the fireplace is made from prefabricated boxes. IN big box back wall already available.

5. Making a mantelpiece

This design element is a must. The shelf, like the end of the fireplace, which is always in sight, is made of different materials. The cheapest, most accessible and easiest to use is polystyrene foam. Before performing it, measure the finished frame. After the top of the fireplace is ready, it must first be fitted to the structure and the corners joined. As a rule, the fireplace mantel is made in the form of a stepped trapezoid or rectangle.

6. Leveling, decorating the fireplace, giving it a certain style

For this purpose, wallpaper, paints, souvenir crafts, and garlands are used. But first, the corners of the fireplace are covered with construction tape for reliability and durability. Next, the fireplace is puttied, thereby eliminating all its irregularities. Putty should be done carefully so as not to damage the frame. Each layer must be dry. As an option, in order not to wait, you can cover the fireplace with white adhesive plaster, which is sold in rolls. The putty adheres well to it and does not penetrate through the adhesive plaster onto the cardboard, thereby not softening it.

To attach materials such as wallpaper to the fireplace, glue and double-sided tape are used. If some parts must be left untouched during painting, construction tape is applied to them.

Corner fireplace made of paper

Creation corner fireplace made of paper differs in the technology of frame formation. First, a cardboard triangle is made, then the firebox is cut out. In a corner fireplace, the firebox can be made semicircular. Next, the top shelf is arranged, and then the corner fireplace is decorated with the help of improvised means and materials.

When the soul requires change, and there is sorely not enough time for a radical change of environment, updating the interior and creating additional comfort in the house will allow you to distract yourself. Perhaps building a fireplace out of cardboard and paper with your own hands is a great way out of the situation.

DIY paper fireplace was last modified: March 21st, 2017 by paradeeva

Residents of city high-rise buildings do not even think about the fact that they can install a fireplace in their apartment, and for this it is not at all necessary to build a brick chimney and contact the fire inspectorate. A decorative hearth made with your own hands from a cardboard box is an alternative to the traditional type of fireplace. To create this piece of furniture, no construction skills or skills in working with equipment are required. All that is needed from a master is fantasy and imagination.

The process of creating a fireplace

Before you begin to implement your plans, you need to know what the work process is. Main stages:

• planning:
• preparation of available means;
• manufacturing;
• finishing and decoration.

Read also the article about in addition to this material.

Planning

In order for a fireplace made from a cardboard box to fit harmoniously into the interior of a house or apartment, it is important to allocate for it appropriate place. Most often, a fireplace is placed in a corner or in the middle of an empty wall. Having selected the future location of the “hearth”, they determine the size of the structure. It is recommended to do this directly at the location where the fireplace is installed. For ease of use, all dimensions are plotted on paper. It is best to make a small sketch of the future fireplace, where all the blanks and details of the decorative item will be marked.

Advice! During the work process, you may need other available tools, it all depends on the design of the fireplace and its design.

Making a wall fireplace

A fireplace from a TV box can be made in two ways - place it against the wall (wall-mounted fireplace) or in a corner (corner fireplace). The simplest and most common option is the manufacture of a wall structure. It is made of three elements - a rigid base, a fireplace portal and a shelf. Manufacturing process:

• First, start creating the base. It must be strong and rigid in order to stand confidently on the floor. To prevent the structure from bending, it is strengthened with stiffening ribs. They are placed inside a rectangular podium in the form of a lattice or in a chaotic manner. The base is cut out from a corrugated box with sides. The upper part of the podium is an additional cardboard panel. The side parts are made of several layers of cardboard glued together and glued to the panels with masking tape.

Important! The width of the base should be 1 cm larger than the fireplace portal.

• It is best to make a fireplace portal on frame basis. Mark the dimensions of the fireplace window on the cardboard and cut out top part stationery knife. The plane of the window is divided in half, and the resulting sashes are folded inward. The result is the side walls of the portal.
• Width interior walls The portal is equal to the width of the ceiling, and the width of the hearth is the length of the ceiling, cut out of cardboard in the form of a rectangle. The cardboard strip is secured with masking tape.

• Next we start making frame panels. They can be made from cardboard rectangles glued together, or lattice partitions. They are attached to the front of the portal and glued with tape.

• A sheet of cardboard is attached to the frame.
• The resulting fireplace portal is inserted into the base.

Advice! Instead of masking tape, where appropriate, you can use PVA glue and paper.

• The fireplace structure is covered with paper or painted over. The resulting niches in the fireplace frame can become convenient shelves for storing things. To make the walls of the “windows” more rigid, several layers of cardboard are used, glued together.

• The next step is manufacturing and installation top shelf. Without top panel the fireplace will look unfinished, plus you won’t be able to put decorations on it. To prevent the structure from falling, the weight of the shelf should be lighter than the base of the fireplace and portal. They put her on liquid nail or polymer glue.

Making a corner fireplace

Angular decorative fireplace from a cardboard box can be installed in any free corner of the room. Additionally, a fireplace can hide an unsightly or empty corner space. Stages of making a decorative “hearth”:

• First, measure the angle. Some install it in a furniture wall.
• The box is used to form the shape of a fireplace. The walls of the resulting triangle are secured from the top of the corner with masking tape.

• The base of the triangle is given additional rigidity. In the corners of the structure, with inside including making 10 cm cuts and wrapping them inside. This allows you to get an even fold. The strips are glued together.
• From part of the box they make a pattern for a fireplace portal or hearth window. The triangle is reduced on each side by 7-10 cm and a mini copy is cut out. Next, it is applied to the large plane of the triangle and cut out. The same cuts are made in the corners, the strips are folded and glued with tape.
• The back parts of the hearth are made from the corner of a box. For the bottom and ceiling you need two triangular parts. The internal boundaries of the hearth are measured along the resulting opening.
• Between the bottom of the “firebox” and the bottom of the fireplace, two posts made of several layers of cardboard are attached. This is necessary in order to give rigidity to the structure.
• It is recommended to cover the corner fireplace with embossed wallpaper. It is better to start work from a corner.
• The fireplace mantel in the form of a triangle is attached at the end of the finishing work.

Finishing

The appearance of a fireplace from a TV box can be very diverse. The side walls and the front shelf can be framed with relief molding. It will visually divide the fireplace zones. Stucco elements are glued to the resulting areas of the “hearth”, and columns are glued to the sides.

Important! All decorative elements glue with polyurethane glue directly onto the cardboard. You can use any composition, for example, “Dragon” glue, etc.

After gluing all the decorations, the surface of the fireplace is painted with white paint using a brush. Hard-to-reach places are painted with a sponge. To highlight a particular area of ​​the fireplace, it is coated with colored coloring compounds. Gold inserts look great in combination with white paint. Craftsmen advise applying varnish to the front of the fireplace and side panels. water based- it will prevent the destruction of the “hearth” and protect it from external influences.

Video: making a fireplace from cardboard with your own hands

Some people stick embossed wallpaper onto the fireplace structure. From rectangular panels of cardboard you can make an imitation of brickwork, onto which wallpaper is glued. The “bricks” are secured with liquid nails in the fireplace niche at the same distance from each other. After this, they are coated with water-based paint and allowed to dry.

After all the finishing work, they begin to decorate the fireplace mantel. It can also be painted or covered with wallpaper. The stucco molding is covered with tinting. The base of the fireplace is decorated with glued painted pieces of foam plastic.

A decorative fireplace out of a box can be decorated homemade firewood. They are made from corrugated cardboard rolled into a roll. The branches are made from smaller bundles. They are attached to the log using glue. The resulting firewood is coated with white paint - gouache.

Anyone can make a fireplace from a cardboard box with their own hands. The best helpers In this matter, the fantasy and imagination of the master will come into play.