Kitchen made from old cabinets. How to update interior doors - breathing new life

Repair is quite an expensive pleasure, which is why it is usually carried out in parts: wallpaper is re-pasted every two to three years, floors are changed every five years, appliances and furniture last for decades, but doors are not honored at all. special attention. Although it is the interior doors that are responsible for the beauty in our home. Therefore, today we will talk about how to transform an old door without extra costs.

“Reviving” an old wooden door
Objects made of wood have always been particularly strong and durable. Even if the surface becomes unusable, the main part of the wood remains in excellent condition. This also applies to doors. They can serve you for at least ten years, look decrepit and shabby, but their foundation will easily “live” another ten years.

Therefore, in order not to have to overpay for a new door, it is better to carry out a low-budget restoration of the old one. It won't take much time, and the necessary tools will probably be found in every home.
Step one. Before you restore an old door, you need to get rid of the layer of paint that covers it. To carry out this procedure, we will need a soldering iron and a small spatula. The soldering tool must be brought to the surface of the door so that the paint heats up. When it starts to bubble and come off, you need to carefully remove it with a spatula.
On a note! You should not bring the soldering iron too close to the door, as high temperature can damage appearance wood
In addition to a soldering iron, you can also remove paint using an iron. To do this you need to close the door thick fabric and iron. A special hair dryer used in construction is also suitable for this procedure. However, working with it will take much longer.
Step two. To level the surface after removing the paint, you need to sand it. There is a special grinder for these purposes, but it is unlikely that everyone will have it at hand. Therefore, it is better to use the usual sandpaper. Moreover, first you should go over the door with coarse-grained sandpaper, and then (for greater smoothness) use fine-grained sandpaper.

On a note! In order for the surface to be smooth and without damage, it must be sanded along the direction of the pile.
Step three. We begin to putty, having first cleaned the door of dust and grease using a solvent. If there are visible damages on the surface (dents, chips), then it is better to fill them separately.

When the putty has dried, the door must be sanded again. Remember that sanding and puttying are the most important stages when restoring interior doors with your own hands. How well the paint will adhere depends on these works.
Step four. All that remains is to give the door a presentable look using paint or varnish. It is more convenient to use a spray bottle for painting. However, at home, when the room is poorly ventilated, it is better to use a brush.

How to update an old fiberboard door?
There are two ways to restore fiberboard doors.
Method one. You can make a door made of fiberboard “new” in the same way as a wooden one. There are only a few significant differences. Firstly, fiberboard material is not acceptable high temperatures, so instead of a soldering iron you need to use an iron (but you should work with it carefully). Secondly, you can only sand the surface with fine-grained sandpaper, as the surface can be damaged. And thirdly, you can decorate fiberboard doors not only with paint and varnish, but also with all kinds of strips with a relief pattern.

Method two. You can “deceive” the eye and make a solid tree out of fiberboard. To do this, you need to “disguise” the old door under a layer of veneer. Working with veneer is not that difficult, as it is glued using an iron. The main thing is to use the iron carefully so as not to burn the material. After that , As the door is covered with veneer, it needs to be stained and then varnished.

Before you restore old doors, think about a new door frame, because hanging an updated door on old hinges and equipping it with old handles would be blasphemous.
As you can see, even for a renovated room it is not necessary to buy new doors. You can only slightly “edit” the old ones.

During operation, even the most expensive and quality door After some time it loses its attractive appearance. Scuffs, cracks and scratches appear on its surface, and the coating peels off completely or partially. Kitchen and front doors can develop stubborn stains that are nearly impossible to get rid of. All these problems can be easily solved by purchasing new door. But if you don’t have the funds to purchase it or don’t want to bother with installing the door frame, you can quickly and easily restore the door yourself by making it a new one original design with your own hands. Thanks to this creative approach, it will stand out against the background standard doors relatives, friends and neighbors.

How to update old doors with your own hands: original ways

The simplest and most affordable method of updating old doors is to paint them in one or more colors. It doesn't require much cash investments and special skills, but also does not have any pretensions to originality. Interior doors can be painted after removing them from their hinges, or when they are in doorway. The main thing is to ensure that the paint applies evenly. Painting will take a maximum of 60 minutes. Other methods are more labor-intensive, but the result will exceed all expectations.

Original ideas for decorating doors:

• Lamination with self-adhesive film;
• Artistic painting;
• Wallpapering;
• Finishing with textured plaster or liquid wallpaper;
• Covering with fabric or leather;
• Stencil painting;
• Decoupage;
• Finishing with mosaics and stained glass paints.

Before proceeding with any of the above types decorative finishing, you need to do some preparatory work.

Preparation stages:

1. Clean the door covered with old paint with a metal spatula. Doors made of veneer or with laminated coating no need to clean. If laminating with self-adhesive film is to be done, the paint cannot be completely removed.
2. The surface is sanded with fine abrasive sandpaper.
3. Scratches, gouges and cracks are covered with putty intended for wood.
4. The door is sanded again, cleaned of dirt and degreased.

After painting the doors, you can begin updating them. Stencil or artistic painting will help transform even old Soviet wooden doors into a stylish and modern interior detail.

For artistic painting manually requires minimal skill with brushes and paints. The ability to subtly convey colors and shades and draw is welcome small parts and create shadows and penumbras. People with artistic talent usually produce real masterpieces. If you find it on the Internet or in a magazine beautiful picture and carefully redraw it, you will also get a worthy interior decoration.

For stencil painting, just find a template and carefully apply paint with it. Beautiful ornaments look amazing on interior and entrance doors. You can also make a stencil yourself by following simple tips.

Step-by-step instructions for making a template:

• Draw a pattern on cardboard or film with a thin marker;
• Carefully cut out all the details of the ornament;
• We fix the template on the surface with glue or adhesive tape;
• Apply paint with a brush or roller.

You can purchase ready-made stencils in large construction stores or order their production according to a personal project.

Glass inserts: how to update doors without changing them

Remaking doors with glass inserts– this is a very exciting and creative process. Installing new glass is quite expensive, so if it is not cracked, it is advisable to breathe into it new life, decorating with stained glass, mosaics or covering with colored film.

If the glass has become cloudy, it is recommended to decorate it with colored mosaics made of glass, wood or plastic. The parts are attached with transparent quick-drying glue. It is advisable to think through the design in advance and select the color scheme for the future composition.

You can only work with glass or plastic mosaics while wearing thick gloves.

Stained glass windows look very beautiful and unusual, which you can easily recreate with your own hands using special mastic and stained glass paints.

Master class on creating stained glass windows:

• If the design is planned to be complex, then its future contours are drawn on the glass with a marker;
• The mastic from the tube is squeezed onto the glass along the contours, and after hardening it is painted with paints with a metallic sheen (gold, bronze, silver);
• Stained glass paints are applied in an even layer.

Pasting the doors with any decorative materials will not only hide noticeable defects, but will give them uniqueness and originality. Even the most shabby door can be completely remade and turned into a real work of art.

How you can paste over the doors in a house or apartment:

• Regular, vinyl, non-woven or textured wallpaper;
• Photo wallpaper (simple or with 3D effects);
• Fabrics;
• Self-adhesive film;
• Genuine leather or substitute;
• Vinyl stickers;
• Multi-layer napkins using the decoupage technique.

Any paper is short-lived, so after pasting with napkins or wallpaper, it is recommended to varnish the surface.

Wallpaper usually remains after renovation, so you can paste it over the doors of a house or country house using wallpaper glue or PVA.

Photo wallpaper with the right pattern will help to visually enlarge the space and completely change the room.

Fabrics in the interior look very stylish, but you need to be careful when working with them. The glue should not bleed through the layer of fabric, and all threads and uncut edges should be tucked inside.

Self-adhesive film should not be glued all at once, but in small areas, gradually removing protective layer and leveling with a spatula or soft cloth to prevent bubbles and folds from forming.

You can cover the front door with leather or leatherette. You can also use popular vinyl leather instead. It is recommended to secure the material with special nails with a wide head or a construction stapler.

Bright vinyl stickers Most often they are attached to the doors of the bathroom, toilet, kitchen, to make it more convenient for guests to find the right room.

Doors decorated with napkins using the decoupage technique look rich and sophisticated, but with modern styles when decorating interiors, they will not look harmonious. Classic, modern, country, Provence, and baroque are best suited to them.

How to update old doors with your own hands (video)

There are many opportunities to restore old doors so that they look like new. And a small alteration will cost much less than installing a new one door frame. In addition, there is no need to replace the slopes; they can also be decorated with stones and rhinestones; paint with paints; cover with wallpaper or mosaic.

When an interior door loses its primary view, everyone is thinking about updating it. You shouldn’t run to the store to buy a new product, but finish the finishing old door. It will cost much less.

What can you use to cover or cover an interior door?

Wallpaper

The easiest way to update an old door in your home is to cover it with wallpaper. In order for the decoration to last for a long time, it is worth knowing certain rules. First of all, the surface of the canvas must be cleaned of dust and dirt, and then sanded. The more old paint will be removed from the surface, the better.

Don't use cheap ones thin wallpaper, since it will look ugly and such decor will not last long. Cleansing wallpaper is the best option. You can choose solid colors, with a pattern, or combine several shades. You can purchase photo wallpapers suitable size, but they are relevant if the surface of the door is smooth.

The gluing technology is very simple: a sheet of wallpaper and the surface of the door are coated with glue and then connected. This must be done carefully, avoiding the formation of bubbles. As an addition, rhinestones or rope are used, but this is not necessary.

Glass

Glass can also be used to give new life. old design. The material is suitable for doors with inserts. Old, boring glass can be covered with decorative film or applied with an interesting pattern. It all depends on your imagination.

One of the most simple ways– painting. If you have drawing skills, you can create stained glass windows. There are special paints for this type of art.

Work with the dye must be done with gloves.

First, the surface of the glass needs to be washed and degreased. Using a marker, draw the outline of the design and outline it with black paint from a tube. When it dries you can start painting. For lovers of glamor, rhinestones and stones, as well as pieces of glass, can be glued on top of the painting.

If the door is wooden, you can give it sophistication in another way - cut out solid circles or other shapes on the canvas and insert glass there. This procedure will not take much time, and the interior of the room will be fresher.

Adhesive tape

Upgrading interior doors with PVC film does not require much time and high costs. For self-adhesive, the surface must be flat, otherwise beautiful view will be spoiled.

As preparation, before gluing, the surface of the door is washed and degreased. There is a glossy door, it can be wiped a little with a damp cloth. Such manipulations allow you to move the film on the surface to select the correct position.

Now you should cut the required size of self-adhesive paper and glue it to the surface of the door. No need to glue right away big piece, protective film It’s worth removing a little at a time, smoothing the self-adhesive.

In this way, you can update not only the interior door, but also any furniture in the house - table, wardrobe, stool, etc.

Types of cladding for the entrance door

When you need to update your front door or improve its thermal insulation, you should think about proper finishing. There are many methods and materials for this process.

Solid wood

This type of cladding is the most expensive, but it looks very stylish. It is used for metal doors. On wooden material You can cut out beautiful patterns or ornaments.

Solid wood panels not only have beauty, but are also an environmentally friendly material.

Marine plywood

This type of plywood differs from ordinary plywood in that shipboard is covered special compounds. For finishing with such material, it is worth considering some requirements - right choice glue, double-sided sanding.

MDF panels

MDF is a material made from pressed wood chips. Compared to wood, MDF can withstand high humidity. It is also not afraid of rotting and temperature changes. In addition, it is environmentally friendly.

With its help, you can choose the appropriate pattern and design. Panel overlays can be installed directly on door leaf.

Lining

Probably everyone has heard about such material as lining. A door covered with such material looks very aesthetically pleasing and natural. The material looks like profile slats of different thicknesses. They have special folding grooves, which allows you to fold them into a single panel. For the manufacture of such material is used edged board made of wood. Plastic lining is also popular now.

Before installing the slats, they should be treated with a special substance - an antiseptic, and finished design varnish.

A cheaper option is plastic lining. It has good resistance to high moisture and temperature changes.

Laminate

To make this material, pressed wood is used, onto which a high-strength film is applied. The thickness of one panel is 6–8 mm.

Laminate is made in different colors with many types of patterns. Such big choice allows you to purchase a laminate that matches the design of the room.

Laminated slats have good shockproof properties, but are susceptible to increased moisture. Therefore, when choosing such an expensive material, it is worth taking into account the geographical features of the area.

Viniplast

This material is made from plastic by adding various additives that have certain properties.

For front door Decorative vinyl plastic is suitable. Despite the fragility of the structure, the material is able to withstand strong mechanical influence.

Leather vinyl

The material for upholstering the front door, leatherette, looks rich, and its price is affordable for everyone. Different textures and colors allow you to decorate the door in any style. It is sold in rolls 120–150 cm wide. This size is enough to decorate a standard entrance door.

Leather vinyl is not afraid of high moisture, but mechanical stress durability is not very high. To care for the material, only a damp cloth is required. Using nails, you can create a relief on the surface.

How to cover an old door card

For tight fitting old map you will need:

• leatherette – 1 m;
• soldering iron;
• chancellor's knife;
• solvent;
• spray glue;
• scissors;
• cardboard and newspapers for patterns;
• marker;
• soft cloth;
• wire cutters

Sequence of work

Instructions for decorative repair of a metal entrance door. Making the right choice

As you know, metal doors are very popular. Good model can be purchased at affordable price. The design not only looks solid, but also protects the home from intruders. But not everyone likes this type of door, and then the best option is decoration.

Decorative panels

The most the best option for upgrading a metal door are decorative panels and overlays. The advantage of such a product is not only in aesthetic characteristics, but also in convenient installation. The main thing is to choose suitable material. In this case, you should focus on your own taste and individual wishes.

Since door linings are installed for a long time, it is better to purchase modern models, which are now in fashion. The total weight of all decorative panels should not exceed the weight of the door itself. If this happens, the geometric proportions will be disrupted and the door structure will be difficult to open.

Decorative coating

Decorative coatings include: paint, special film, galvanic coating. This method of change is no less successful than decorative panels. If it can be used as for new door design, and as an update to an old design.

You can carry out such repairs yourself. It doesn't take much time and requires special skills. In addition, it costs less than covering with panels and will not affect the operation of the doorway in any way.

All types decorative coatings Suitable for both metal and wooden doors. It is only worth noting that for wooden surface Fire resistant paint must be used. If on metal door apply beautiful drawing, this will create a furore among the neighbors and will stylish solution decor. If you have some skills, you can draw on your own. If not, it’s better not to risk it and call a professional for help.

Do-it-yourself covering of metal and wooden doors: how to cover the entrance and interior doors, how to cover an old door card, instructions for decorative repairs

Further

How to open door lock without a key: what to do if the door slams or the key is lost How to choose the right one interior doors to the apartment Thermal insulation of metal, wood, plastic doors in a private house Disassembly, DIY door repair, replacement broken glass and installation of glazing beads Door trim with leatherette, plastic, comparative characteristics Installation of balusters, railings Anti-slip coatings on steps

Photo from the DveriKom website

Each of us is familiar with the problem of aging entrance and interior wooden doors firsthand. They are installed in all apartments, private houses and cottages. Over time, everything deteriorates and gets old, so we periodically update the interiors of our homes - we make repairs, glue new wallpaper, whitewash the ceilings. Signs of aging also affect doors. They dry out, begin to creak, and lose their presentable appearance. But replacing them with new ones costs much more than the same wallpaper. When financial issue becomes a priority, you want to save money, a pressing question arises: “How to update old wooden doors with your own hands at home?” In this article we will tell you, show and advise a wide variety of restoration techniques and methods.

How to update wooden interior doors

So, you need to restore wooden doors. The reasons can be very different - they are outdated, tired or do not fit new interior your room. Where to start? First you need to prepare the surface of the wooden canvas.

Preparing the wooden canvas

All doors are different - some are varnished, others are painted, others are covered with fabric. Under their layers is often good wood, which can still serve its owners long years. In order to restore or renew a door leaf, its surface must be freed of all unnecessary things.

You will cope with this perfectly if you have at least minimal experience working with wood, as well as necessary tools: spatulas, brushes, a hair dryer, a grinder and sandpaper of various grain sizes. You may need more construction material, such as putty, varnish, drying oil and stain. Armed with all this, you can begin the process.

Attention

Take the preparation of the door leaf responsibly - the quality of the putty and polishing will largely depend appearance finished restored door.

How to renew a varnished door? First of all, it needs to be removed from its hinges to make it more convenient to work. Remove all fittings: hinges, handles and locks. They will only bother you. If the hinges squeak a lot or are completely outdated, you can replace them with new ones. Prepare two stools and place the door on them in a horizontal position. Remove the glass, if present, to avoid damaging or breaking it.

Delete old varnish or paint in several ways:

• Heat the surface of the door leaf with a construction hairdryer, the varnish will immediately soften. Remove it with a rag. If the door is covered with paint, you need to remove it with a spatula. Pay attention to the features of the work construction hair dryer. It is capable of heating paint and varnish to 400-600 degrees. This tool must be moved evenly over the surface of the door, without lingering in any one place, otherwise the paint or varnish may catch fire, releasing toxic fumes that are dangerous to human health. Don't forget to ventilate the room periodically. Remove melted paint carefully so as not to scratch the surface of the wooden panel.
• Paint and varnish can be cleaned using a universal remover that removes all types of paintwork.
• Use sandpaper to remove the last remaining small stains.

Photo from the site o-dveryah.ru

The next step is to eliminate all the cracks and cracks that have appeared over the many years of service of your door. You can cover them with putty, a retouching pencil or furniture wax in the color you need. The wax needs to be slightly melted so that it softens, cover all the cracks and cracks with it, and after cooling, remove the excess with sandpaper.

There is another remedy - putty, prepared independently. You will need wood dust, you will get it when sanding the surface of the door leaf. The second component will be the varnish that you plan to use to coat the updated door. Mix these two components and cover the cracks with the resulting mixture. Another putty option is a mixture of sand, cement and alabaster. This product will hold tightly and will not crumble or crack over time.

After the putty has dried, the door leaf should be sanded. Use a special grinder, carefully move it along the surface of the door, do not press hard so as not to leave dented stripes. You can also use fine-grit sandpaper. After sanding, you should thoroughly rinse the door.

Photo from the site o-dveryah.ru

The final stage preparatory process There will be an application of drying oil or stain, which performs a double function. They paint the wood the right tone and protect it from moisture penetration. These materials are applied using a special sprayer if you need to achieve a more even tone, or traditional way- brush and roller.

Now carefully check the surface of your door leaf. If no traces of paint or varnish are visible, the cracks and cracks are covered, everything is sanded and sanded, covered with linseed oil or stain, then you can begin the most interesting part - decorating.

Methods of restoration and restoration

Think carefully about the idea of ​​restoring the door - what style suits you best, what color scheme, how will it fit with the entire decor and interiors of your room? Below we will tell you how to update an old wooden door in various ways. Perhaps you will like one of them and decide to use it.

Painting

This is the simplest method. You already have the prepared surface of the door, you just need to choose the right paint. Buy it with a reserve, and in one batch. If you suddenly don’t have enough, then look at the article number on the jar to purchase the same one. Another batch of the same color may have a different tone.

Usually doors are painted with nitro paint, alkyd or acrylic enamel. Each of them has its own advantages and disadvantages, so you need to immediately decide which criterion is of higher priority for you - quality, price, variety of tones or convenience and safety of its use.

Big disadvantage alkyd enamel and nitro paints are characterized by their pungent odor and harmful fumes during application to the surface. They can only be used in a deserted room or on fresh air. The use of such paint can cause serious harm to the health of allergy sufferers, keep this in mind.

Acrylic enamel is the most expensive. She has great color scheme, does not smell, gives a matte finish. This paint requires a second coat. acrylic varnish, which further increases the cost of this material.

Photo from Guru Paints website

Most often, doors are painted with brushes, but you can also use a roller. Brushes require some preparation. They need to be combed to remove loose bristles, and then soaked for several hours. Before painting, you need to apply a primer to the surface of the wooden panel to match the selected enamel. This is done for several reasons - the paint on the primed door will lie easily, evenly and without smudges, forming a durable layer.

Varnishing

We've sorted out painting, but how can we renew varnished wooden interior doors? Like paints, varnishes come in several types, so you need to first decide on your choice.

There are alkyd, acrylic, polyurethane and nitro varnishes. They differ in shades, strength indicators, drying speed, and degree of toxicity. After studying the characteristics of each type, you will definitely choose the best option for yourself.

The quality of varnishing will largely depend on the level of polishing of the door surface and puttying of the cracks. The more carefully these works were carried out, the smoother the varnish will lie on the prepared wood. Before applying the composition to the surface of the door, it is necessary to treat it with a special liquid that protects against insects, moisture and mold, as well as a primer. The varnish itself must be applied using a roller or brush in an overlapping direction and quickly to make the transitions invisible. All smudges are removed with sandpaper. The last, third layer cannot be sanded.

Decoration

How to update wooden doors with your own hands, in addition to using paint and varnish? You can choose one of the creative methods - self-adhesive film, appliques, stickers, photo wallpaper, stained glass or fabric finishing.

Now let's talk about everything in order.

• How to update an old interior door quickly and on a budget? Cover it with self-adhesive film. The range of this material is varied. You can easily choose interesting drawing, the desired tone with a matte or glossy texture. Working with film is very convenient. It has great elasticity and bends easily, following the contour of the door and all its protrusions. Start gluing from the top, gradually smoothing the glued part with a rubber spatula. There should be no bubbles left on the surface of the door, so do not rush, do everything slowly and carefully. If you do see a bubble, pierce it with a needle and press on the area to remove the air. Trim off any excess with a regular knife.
• How can you update interior wooden doors with photo wallpaper? The principle of their application is similar to film. Only the surface of the door is smeared with glue and smoothed not with a spatula, but with a soft cloth from the center to the edges. After the glue has dried, the photo wallpaper must be covered with a layer of varnish so that it lasts longer.
• Fabric finishing – unusual and original way how to renew wooden doors. You will need to select a piece of material and buy a double-sided duct tape. If you are restoring a door in a nursery, it is better to choose fabrics with images of fairy-tale characters that are held in high esteem by your child. Glue a piece of fabric cut to size onto the self-adhesive tape. Don't rush, do everything slowly to avoid wrinkles that will be difficult to straighten later.
• If the door has glass, you can use it to make a stained glass window. To do this, the surface is first washed and degreased, rinsed clean water, then wipe dry with a cloth. A sketch of the image is made with black paint on the prepared surface. After drying, the drawn cells are filled with stained glass paints.
• How to update wooden interior doors with your own hands using applique? Any cereal is suitable as a material - pasta, rice, peas, beans, coffee beans. Use beads, shells, pebbles, metal buttons. Any of your ideas will be creatively embodied in the door design.
• If you have artistic abilities, you can draw a beautiful and bright picture yourself, or use a ready-made stencil.

Photo from the Doors website

How to update an old wooden entrance door

The technology for updating a wooden entrance door is similar to restoring an interior door.

Paint or varnish is applied to the prepared canvas, self-adhesive film, cladding is done with laminate or veneer, upholstery is natural, artificial leather or dermatin. The latter method will not only update the interior of the door, but also insulate it. It is better to select nail heads for upholstery to match the material. This factor will make the design of the entire structure more efficient.

Photo from the Door Guide website

How to update wooden entrance doors with slats? You just need to choose the best one suitable option moldings - figured wooden slats or polyurethane baguette. They are painted in colors identical to the tone of the door or, conversely, contrasting. The finished moldings are glued to the door leaf.

It's time to sum up our conversation. We told you about in various ways How to update entrance and interior wooden doors with your own hands. Based on our advice, you can try to restore the door leaf yourself, implementing the most daring creative ideas and plans. Keep at it and you will succeed.