Artificial snow made from baking soda and is no different from the purchased one. How to create it will help decorate your home before the New Year. Fake snow is used to decorate Christmas trees, windows, and fakes. It’s not difficult to make a snowball with your own hands, the main thing is to follow all the rules for preparation.
Soda is found in every home and is suitable for making cold snow. The result of cooking will shock any person. The made snowball turns out soft, silky, like a real one.
Fake snow made from shaving foam and soda
Making a fake snowball at home is not difficult. To prepare, take a pack of baking soda and one can of shaving foam. The snowball looks more beautiful and interesting when you add sparkles. It is easy to make a snowman from the snow mass. Much can be added to the prepared mixture; it all depends on the person’s imagination.
Take a plate to mix the ingredients. It is recommended to take dishes with a deep bottom or a basin. The container is wiped dry without leaving any moisture. If there is any remaining water in the basin, the preparation of the snowball will be ruined. Fake snow is suitable for sculpting snowmen and snow figures.
The snow mass is prepared as follows:
- Be sure to take a dry bowl to mix the ingredients.
- A whole pack of baking soda is poured into a container.
- Shaving foam is added to the bicarbonate.
- All components are mixed until a mixture is formed.
- Sparkles and other elements are added.
- Snowmen and figures are being made.
It is not recommended to add sharp, prickly parts to the snow mass; this will lead to skin cuts. A fake snowball made from bicarbonate and shaving foam comes out cold due to the reaction of the components. The snowball smells fresh; aromatic impurities are added in the form of lemon juice.
Fake snowball made of bicarbonate foam contains chemical elements, you will need to take precautions. It is recommended to monitor children playing with a fake snowball.
Artificial snow made from PVA glue
The unnatural snowball is made using a soda solution and PVA glue. Some people advise adding white acrylic, then there will be no yellow tint when it dries. Using snow mass, large snowdrifts are made on different surfaces. You will need to take 5 tablespoons of sodium bicarbonate and mix it with PVA glue.
The ingredients are mixed well until thick. The resulting artificial snowball is applied to the desired surface. When dry, the mass made will show good result. Fake snow in the form of snowdrifts cannot be distinguished from real snow.
Unnatural snow made from salt
Salt, NaHCO3, is used to decorate the twigs. Nowadays people do their interior decoration on New Year fake snowball. The rooms are decorated with individual branches with frost.
For decoration, use the following recipe:
- Take 5 liters of liquid, one and a half packs of salt, one pack of sodium bicarbonate.
- Water is poured into the pan.
- The above ingredients are added to the liquid and the container is placed on the fire.
- The prepared solution is heated and stirred constantly.
- When the salt and bicarbonate are completely dissolved, the container is removed from the heat.
- Wait until the prepared mixture cools slightly.
- Pine branches are placed in the liquid for six hours.
- During this time, a snow crust will appear on the needles.
- Remove the branches from the composition and let dry for 30 minutes.
The result of the prepared recipe will surprise every person. The unnatural snowball is made from natural ingredients and does not harm human health. It is easy to replace a store-bought snowball using sodium bicarbonate, table salt.
Making snow from baking soda and hair conditioner
If desired, each person makes a snowman without leaving home. Take three glasses of bicarbonate, 100 ml of hair conditioner. All ingredients are mixed in a saucepan and kneaded thoroughly by hand. You will need to stir until a homogeneous mass is obtained. The consistency is similar to whipped cream.
Add a little more soda solution and then knead it with your hands. Add sodium bicarbonate to obtain a consistency similar to snowball. When the snowball is sticky, add a little sodium bicarbonate; if it is too dry, add hair conditioner.
Snow is poured onto the table, snowmen or figures are made. To create a snowman, you will need to take a toothpick for the arms and legs, a few peppercorns for the eyes, and a ribbon for the neck. Fake snowball is good for small children and is considered harmless.
Snow made from cornstarch and soda
A child can handle preparing the snow mass. A fake snowball is good for sculpting. Thanks to the snow mass, the baby develops motor skills and tactile sensations. 
As soon as the solution has cooled, multi-colored sparkles are added and the snow mass is kneaded until it becomes clay. The product is mixed until the snow becomes plastic, shiny, and smooth. Snow clay is stored in a special container in the refrigerator.
Artificial snow made from soda and shampoo
Artificial snow from soda and shampoo is easy to make. Take a container and mix the ingredients. You will need to knead with your hands until a homogeneous mass is formed. You need to add soda a little at a time. general solution. The prepared snowball is well used for children; it does not contain harmful substances.
The snow mass is suitable for making various figures and snowmen. Sparkles can be added if desired. The artificial snow feels like real snow. The snow mass is placed in the refrigerator.
If you like to decorate fir branches, windows, or various New Year's crafts with artificial snow or frost, these tips will definitely suit your taste. We will tell you about domestic and very budget alternatives purchased cylinders. The most important thing is that it will not be difficult to repeat any of the seven ideas with your own hands, and in some cases, spraying will be even more durable and durable than the store-bought version.
Stock up coniferous branches, New Year's wreaths and other paraphernalia - let's start decorating!
Method one: regular cotton wool
If you don't want to mess around for too long, this method is just for you.
What do we need?
- cotton wool or cotton pads
- PVA glue
- tweezers
- glitter (optional)
How to do it?
The cotton wool needs to be torn into small pieces - the smaller the better. If you use cotton pads, then only the inner, soft part will be used.
Dip each piece in glue for a few seconds and immediately apply it to where we are creating the spray.
Before the glue has time to set, sprinkle the product with glitter - you get the effect of sparkling snow.
When everything dries, the accessory will look no worse than powdered with ready-made artificial snow.
Method two: foam
You'll have to rustle, of course. If you are annoyed by the creaking of polystyrene foam, this master class is not for you. And if you don’t care, and you want to get artificial snow quickly, inexpensively and, ultimately, beautifully, this is the place for you.
What do we need?
- Styrofoam
- grater
- PVA glue
How to do it?
You just need to grate the foam on a grater (medium and oblong). If he is not himself good quality and simply breaks, then crumble it into grains with your hands.
Now we grease the spruce branches (or any other accessory) with glue and simply sprinkle them with the prepared material.
The foam sticks well to the glue and looks really realistic. Especially if you manage to grate the “flakes”.
Method three: snow made of salt
If you don't mind tinkering a little, this tutorial is for you. Don't worry, everything is simpler than it might seem. And most importantly, the result will definitely please you.
What do we need?
- salt (take regular coarse stone salt) – 1 kg
- water – 1.5 liters
- blue paint, copper sulfate or ink (optional)
How to do it?
First you need to prepare a strong brine. To do this, pour salt into the water and put it on low heat, stirring constantly. As soon as the water has boiled and all the salt has dissolved, remove the pan from the stove.
At this stage, add dye if you want to get artificial snow blue.
We take coniferous branches (real, not artificial) and immediately lower them into the water: all at once or one after the other - it doesn’t matter. A few seconds will be enough for the salt to cling to the branches.
Now we need to endure our futures snowy branches to the cold. If possible - on the balcony, but better - on the street. If both options are not for you, put them in the refrigerator in a bowl.
After 7-8 hours, we take out the branches and hang them somewhere. We need to let them dry thoroughly.
In a few hours, our “New Year’s” branches will be ready. They will turn out truly magical and incredibly beautiful. Even artificial snow from a balloon cannot be compared here!
Method four: sweet frost
If spraying needs to be done quickly, this option will be optimal. Just keep in mind that the finished branches should not be stored for too long, because the “snowball” will consist of a food ingredient.
What do we need?
- sugar
- liquid glue
How to do it?
Dilute a little in a container with water liquid glue. In principle, you don’t need to use glue at all, but it will still serve a good purpose for more reliable fixation.
Now dip the twigs in this solution, and then take them out and immediately sprinkle them generously with sugar.
When the water dries, the sugar will stick to the branches.
Eat little trick so that this beauty lasts even longer. When everything is completely dry, spray the branches with hairspray. However, there is also a minus: the varnish can extinguish the pleasant pine smell.
Method five: fluffy and soft snow made of yarn
If you want your artificial snow to be not only beautiful, but also pleasant to the touch, make it from yarn. This method is especially good for those who have children in their home. The little one is always drawn to snow-covered Christmas trees. To prevent the kids from injecting themselves and touching the chemicals, without which store-bought artificial snow in balloons is simply unimaginable, replace the decoration with something really pleasant.
What do we need?
- several twigs (not necessarily coniferous)
- scotch
- white yarn (it is best to take shaggy and soft “grass”)
How to do it?
First, the rods need to be cleared of bark. It will be more convenient to work with smooth branches.
We take a thread and glue it to the base of the twig using thin tape. Then we simply wrap the branch to the end. You don’t have to do it very tightly - let the twig show through, it’s even more interesting.
We also secure the end of the thread with tape.
In this way you need to wrap all the rods, and then simply make a composition out of them.
It would be optimal to make something like a bouquet: “snow-covered” branches + ordinary spruce or pine branches and cones. If you want something more interesting, you can twist the rods into a wreath (we have already told you) by adding a few pine branches and various New Year's paraphernalia.
This method is in no way inferior to the others. Yes, it looks less like real snow, but it still looks beautiful and very cozy.
Method six: cold snow from soda
If you want your homemade artificial snow to look and feel like the real thing, try this simple recipe.
What do we need?
- pack of soda
- can of shaving foam (take the simplest one)
How to do it?
No tricks: just pour the baking soda into a bowl and gradually squeeze the foam into the container, constantly mixing the mixture with your hands. There is no need for an exact proportion here - it depends on the quality of the foam. As a rule, a 500-gram pack of soda requires a whole can of foam. If you need less, rely on the touch: as soon as the consistency becomes similar to wet snow, from which you can make snowballs, our mass is ready.
If you really want to make something out of this “snow” (snowmen, for example), add a little more foam. If you need a crumbly snowball, you will need a little less.
Method seven: snow from diapers
Yes, yes, we will make snow from diapers. The fact is that they contain sodium polyacrylate - a component that cannot be found anywhere else. And that is exactly what we need.
For clarity, we suggest you watch the video master class - it will be clearer.
As you can see, there is nothing complicated, and the result is really impressive. Perhaps this is one of the the best ways making artificial snow with your own hands.
All these methods will help you make artificial snow at home. From seven master classes, choose the one that meets your requirements for New Year's decor: soft, cold, durable - everyone has their own distinctive features. Whatever you choose, the result should please you, because snow will help you feel the holiday approaching and create Christmas mood!
Views: 39,232
How to make artificial snow at home
11. Snow from a baby diaper
Ingredients:
Baby diaper.
To get snow you need:
1. cut the diaper and remove the sodium polyacrylate from it, and then tear it into small pieces.
2. Place the resulting mass in a container and fill it with water. Pour gradually, in small portions, until the pieces of polyacrylate begin to resemble snow. Just don't overdo it or it will end up too wet;
3. To make the snow look more realistic, place the container in the refrigerator, but not in the freezer.
12. Frost from salt
Ingredients:
- salt (preferably coarsely ground);
- water.
Prepare a concentrated salt solution. To do this, fill the pan with a small amount of water and place it on low heat. Add salt until it stops dissolving. Dip the branches of spruce, pine or any other plant into the hot solution and leave for a while. The process of crystal formation is much faster in warm water! Let the water drain and leave the plants to dry for 4-5 hours. Sparkling frost is guaranteed! If you add brilliant green to the salt solution, food colorings or ink, the frost will turn out colored!
13. Artificial snow for " snow globe»
Ingredients:
Paraffin candle
It must be grated on a fine grater. This “snow” is great for making toys “a la snow globe”, when glycerin and artificial snow flakes are added to the water. The container is hermetically sealed and when shaken, the snowball smoothly sinks to the bottom.
You can really go more in a simple way- and add regular sparkles to such a ball. It will turn out no less impressive.
14. Snow made of PVA and flock
Flock is a very finely chopped pile. And if you're lucky enough to find a package of white flock on sale, rejoice. After all, now you will have “snow” for any craft in a matter of minutes. It is enough to generously coat the surface with glue and sprinkle flock on top (you can use a strainer).
15. Snow made from PVA and starch
Ingredients:
- 2 tablespoons starch
- 2 tablespoons PVA
- 2 tablespoons silver paint
Mix (grind) the ingredients thoroughly.
This kind of snow is suitable when you need to decorate the surface of a product with a voluminous white mass.
16. Mass imitating snow
Ingredients:
- fine quartz sand or semolina or foam chips
- white acrylic
- thick PVA
- glitter
1. Pour into a bowl a small amount of the material you have chosen. Approximately 1 faceted glass.
2. We begin to gradually add white to this bulk material. acrylic paint. Based on experience, it is better to buy it in hardware store For facade works. We add until such a state that our loose particles stick together, but do not float in the liquid.
3. Then add PVA, preferably thick. We also add very little so that the mixture is elastic and viscous.
4. Well, and some silver sparkles. Mix everything and... that's it!!!
Recipes for edible “snow”
17. Sugar snow
Ingredients:
Dip the edges of the glass (glass) into water or syrup and then into sugar.
18. “Snow-covered” plants
Ingredients:
- gum arabic;
- egg white.
Using these components, you can sugar plants (non-poisonous and non-bitter). Good taste flowers of pear, apple, cherry, rose, violet, primrose, lemon, begonia, chrysanthemum, gladiolus, pansies. Candied leaves of mint, lemon balm, and geranium turn out beautiful and very fragrant.
Dissolve 12g of gum arabic in ¼ cup with constant stirring hot water(in a water bath). Cool the solution. Prepare sugar syrup: 100g sugar per ¼ glass of water. Cool too. Apply gum arabic solution first to the plants with a brush, and then sugar syrup. Sprinkle with fine granulated sugar (not powdered sugar). Dry on parchment or tracing paper. Such “snow-covered” beauty will not deteriorate for several months. These flowers can be used to decorate a birthday cake or your favorite small sweet pastries.
19. “Snow-covered” plants - option 2
Ingredients:
- egg white;
- sugar.
Beat egg white and sugar until foamy. Apply with a brush to the petals of the plant and sprinkle powdered sugar. Place the plants prepared in this way on parchment and place in the oven over low heat. In two hours you can admire the beauty!
20. Salty « snow » for meat
Ingredients:
- a pinch of salt;
- egg white.
Beat the egg white and a pinch of salt into a stiff foam using a mixer. Place this improvised snow on the meat and send it to the oven! Miracles: a chicken in a snowdrift!
Now you know how to make artificial snow at home, and we hope that from these 20 artificial snow recipes you have chosen the right option for yourself.
Snow. Soft, fluffy, delicate, fresh, sparkling, captivating and alluring. Fun Science today suggests making snow with your own hands. Make snow at home. Children will definitely enjoy snow experiences and experiments. A snow fairy tale awaits you. Welcome, friends.
DIY sparkling snow
Ready to make fluffy, cold and very soft snow? The ingredients are simple and affordable. No dangerous ingredients. Easy recipe. To make snow with your own hands, you need to thoroughly mix the following components together:
- corn starch,
- shaving cream,
- mint extract (optional)
- sparkles.
DIY snow plasticine
An unexpected combination, you must agree. If you want to sculpt with snow mass, then write down the recipe. The child will undoubtedly enjoy this experience and will be useful for training motor skills and developing tactile sensations. The magic of this modeling compound is the ordinary ingredients and the shimmering shine. It won't take long to prepare the snow. Take:
- 2 cups baking soda,
- 1 cup cornstarch,
- 1 cup cold water,
- a few drops of mint extract,
- sparkles.
Combine all recipe ingredients except glitter in a large saucepan. Simmer until the ingredients begin to bubble and the liquid begins to thicken. Stirring continuously, bring to a puree. Remove the pan from the stove. Transfer the mixture into a deep cup, let cool, cover with a towel. Once cooled, add rainbow glitter and knead into clay. How long to knead? Until you achieve the desired shine, smoothness, and plasticity. In order for the snow clay to slightly cool children's hands, store it in an airtight container in the refrigerator.
Making your own snow paints
Is it possible to paint with snow? Certainly. But first you need to cook snow colors. This is exactly what we will do now. We prepared for this task in advance. In the evening we put the shaving foam in the refrigerator, and in the morning we put the glue in there (for 10 minutes). When everything was ready, we began to experiment.
In a deep cup, mix shaving foam and glue in equal parts. Added glitter + a few drops peppermint(to add a fresh smell) and mix everything thoroughly. As you may have noticed, the recipe is simple. And what wonderful drawings you get. Try it! Your child will love this fun! See even more recipes for homemade and safe paints.
Making “silk” snow with your child at home
When you can't go outside to play in the snow in winter. Or there is no snow, and you miss it, ask your parents to organize a snow fairy tale at home. And now I will tell you the recipe for silk snow:
- frozen white bars of soap of any brand,
- cheese grater,
- sparkles.
Place a few bars of soap in the freezer overnight. Take out one piece at a time and start grating the soap. The last step In this short process, you will add rainbow sparkles and peppermint extract. Your own homemade snow is ready. It's time to build a snowman.
Snow dough - a super recipe for home cooking
This recipe is based on just two simple ingredients:
- 450 g corn starch,
- 250 ml of any cosmetic body lotion.
Friends, to make snow dough, just mix these ingredients with each other and that’s it. Adjust the density of the mass at your discretion. Little advice: You can reward the dough with pleasant coolness and special softness if you cool the ingredients before mixing. Want to keep the dough longer? Place it in a tightly sealed bag and put it in the refrigerator. If the dough becomes dry, mix it with hands moistened with lotion.
Liquid snow - prepare it at home with your child
Let me remind you that today we are making snow at home with the children. And therefore, most of the ingredients need to be cooled or frozen before starting the experiment. So, take the starch out of the freezer and add it little by little ice water until the consistency is not too liquid.
Friends, if you have never made non-Newtonian fluids before, you are in for a magical surprise. Be careful when active interaction the mass becomes not only harder, but more viscous, and at rest it spreads.
But that is not all. We have prepared for you the most complete selection of snow recipes that you can prepare with your child at home.
Artificial snow made from shaving foam, a simple recipe for making at home
The process of squeezing shaving foam into a basin is in itself exciting activity. Entrust this stage to your child, he will be wildly delighted. Empty your can of foam? Great, it's time to gradually add soda (1 pack). At the final stage, add glitter. The artificial snow is ready and you can sculpt figures from it. Cold homemade snow will be pleasant to the touch when it is pre-cooled in the refrigerator. Enjoy your experiments.
“Fragrant gentle snowball” for children’s entertainment
In previous recipes, we added peppermint extract. The fresh smell is amazing. But if you want other flavors, then you will probably like the following recipe:
- 2 cups of flour,
- ¼ cup baby oil.
The recipe is simple, and the snowball turns out delicate (ideal for children with sensitive skin), with a pleasant aroma. You will need a whisk for thorough mixing.
Important! The presence of oil in the recipe makes it difficult to clean up after playing.
Next up is another recipe for unusual snow. Are you tired yet? Then we continue.
Making artificial snow from a baby diaper
How far progress has come, science is advancing by leaps and bounds across the planet, and today, we will tell you how to make snow from diapers at home. Well, the components of this recipe are also simple:
- baby diaper,
- water,
- fridge,
- great mood(by the way, this is a required ingredient in all recipes).
Parents and teachers go to great lengths to bring their child joy, pleasure and ignite a spark of interest in science. After all, we all understand that science is fun. The main thing is to find the right angle from which to show the child all the beauty of what awaits him tomorrow.
Today I suggest you gut your baby diaper and extract the sodium polyacrylate from it. Important note! Transfer the entire mass into a deep cup and gradually, in small portions, add water - continuously! Violation of technology and the snow will be too wet. Now it's time to add realism to our project, let's put the resulting snow in the refrigerator.
Dear scientists, are you tired of experiments yet? Fun Science has prepared some more fun instructions for you on how to create snow at home. It doesn’t matter whether the New Year comes tomorrow or in six months. This type of entertainment is relevant in any season. The main thing is the desire and availability of the necessary components at hand.
Do you have soap and toilet paper? If yes, then I suggest making snow from these elements.
Making snow with children from foam polyethylene
Do you like the idea of sprucing up the whole house before a magical holiday? Prepare some PVA glue and coat the surface you plan to decorate with a liquid solution. Now begin the process of making snow. Children will especially enjoy working with gloves and it can be an amazing experience. You need to grate polyethylene or foam. As a base, you can use packaging material for equipment, shoe inserts or polystyrene foam. Add sparkles to this airy mixture and enjoy the decorating process.
Making decor, preparing frost from salt
Continuing the decorating theme, I suggest making frost. To do this, you need to prepare a base - a concentrated saline solution. Take a saucepan, pour a small amount of water into it and put it on low heat. Add salt to the pan until it stops dissolving. Dip the branches of spruce, pine or any other plant into the hot solution and leave for a while. And now the science is starting to work. The process of crystal formation begins, which goes much faster in warm water! Let the water drain and leave the plants to dry for 4-5 hours. That's it, you get frost-covered branches. Further decor is at your discretion. Send photos of your work in the comments to this article. What innovation can you add to the recipe?
Artificial snow for a “snow globe”
Glass bowl- a fascinating children's toy. You can add regular sparkles to such a ball. But then the experiment will not work. Therefore, we take a white paraffin candle and rub it on a fine grater. That's it, the snow is ready. And to create a “snow globe” we need a ball, water, glycerin and artificial snow flakes. You can add shimmering accents with glitter. We close the container hermetically and when shaken, the snowball smoothly sinks to the bottom.
PVA snow and starch
Take and thoroughly mix the starting components:
- 2 tablespoons starch,
- 2 tablespoons PVA,
- 2 tablespoons silver paint.
Congratulations! You have just received excellent snow for 3D decoration of any craft for kindergarten or decoration of interior items.
Preparing a mass that imitates snow
Starting components:
- fine quartz sand / semolina or foam chips,
- white acrylic,
- thick PVA glue,
- sparkles.
When everything you need is ready, we begin the cooking process. Follow the instructions, follow the steps:
- IN deep plate pour 250 grams (a full faceted glass) of your chosen material.
- We begin to gradually add white acrylic paint to this bulk material. Our task is to ensure that the loose particles stick together, but do not float in the slurry.
- Now it's time to add thick (this is important) PVA glue. We try to achieve elasticity and ductility. Add PVA little by little.
- And the last, very important touch is glitter. We thoroughly mix our artificial snow and... that's it!!!
Sugar snow
This recipe is suitable for decorating children's (and not only) parties. Before pouring juice, compote or cocktail into a glass, do a simple manipulation. Dip the edges of the glass (glass) into water or syrup. Done? Now you need to dip the wet edges in sugar. It is most convenient to do this on a tray. This is how fast and easy way make festive, snow-covered glasses.
Salty “snow” for meat
Young cooks can provide invaluable help to adults and prepare decorations New Year's table- meat.
For this recipe we will need:
- a pinch of salt;
- egg white;
- mixer.
Place egg white and a pinch of salt in a deep cup. Now turn on the mixer and beat our liquid mass into a stiff foam. What's next, you ask?
We take meat, for example, chicken, and put this improvised snow on it. Done? Amazing. It's time to put the meat in the oven. The result of our culinary experience is delicious and holiday dish: chicken in a snowdrift!
These are the recipes for creating a magical snowy atmosphere at home, prepared for you by Merry Science. Write about the progress of your experiments in the comments. Send your photos. Show your masterpieces to the scientific world. Tell us about all the stages of your preparation for the New Year. But remember that if in the summer you want winter, open this page and feel free to make snow. In summer! On own kitchen together with the children! This will be a lot of fun!
We might have missed something in this collection. Therefore, if you have own recipe“how to make artificial snow at home” and you want to tell everyone about it - we are waiting for your letter. We will be happy to publish your New Year's experiments.
This year December was in no hurry to please us with snow. Svyatoslav asked every day when it would snow so that he could make snowmen. So I decided to experiment with artificial snow. I must say there were a lot of recipes on the Internet. For myself, I chose those that did not require additional trips to the store :)
Whether it turns out to be snow or not, it doesn’t even matter - what’s important is that this is another way to interest a child in sculpting. Because you can really sculpt from it, but not like from dough, plasticine or kinetic sand. This new experience for the child, new interest and new reason dream up.
And here is the recipe for the first version of snow:
Pack of starch + vegetable oil or baby oil.
The oil is gradually introduced into the starch and stirred. This “snow” sticks together well and crumbles back just as well. The child was carried away for a long time, he didn’t even need any additional accessories and figures for modeling, he simply crushed it and sculpted balls, made snow house in various variations.
As an experiment, try adding water to the starch instead of oil, the result will be different, but no less interesting, that’s what we did
The second snow option is more exotic:
To do this, you will need a pack of soda and shaving foam.
The process of creating snow itself is very unusual, because shaving foam had never fallen into the hands of a child before, and the squeezing process itself brought complete delight.
When the foam is squeezed out, you need to mix everything thoroughly, you may need to add more soda so that the mass turns out crumbly and does not stick to your hands, but at the same time, sticks together into balls. 
This version of snow is very pleasant to the touch, cool and white, like real snow. The only negative for me is the strong aroma, although this did not bother the child. Svyatoslav again devotedly sculpted, connected his favorite penguins and built glaciers and slides for them. 
Both snow options store well. First option We stored it in containers and even after a week it did not lose its properties at all.
Second version of snow, after use I stored it in the refrigerator in plastic bag. On outdoors it dries out and becomes crumbly; you won’t be able to sculpt from it.
And out of the refrigerator it was absolutely the same as when it was first used.
At the end of the snow games, when interest in the sculpting process waned, I prepared a snow one. As a rule, such boxes are interesting to children who are already at the age role-playing game. For her, I took the attributes that were at hand and, of course, my favorite characters, suggested a plot and the game began. 
And I, in turn, move away and am glad that every day my participation is required less and less.
