How to wash cherry pits. How to pit cherries easily and quickly

How to remove pits from cherries manually without special devices

To get rid of the pits as quickly as possible, the whole family, including children, is involved in the process of removing them. In this case, the simplest and most common way is to extract them manually. How to quickly remove pits from cherries without help special devices? Everything is elementary: index finger is inserted into the hole where the twig was attached, and with its help the bone is removed.

With a hairpin

Every woman in her home should have a simple one. With it you can quickly and easily least losses, in the form of cherry juice and pulp, remove the seeds from the cherries.

The pin is inserted with an arched base into the part of the berry where the twig was located. The bone, in a circular motion, clings to the base and is pulled out with a hairpin. In this way you can easily and quickly process large quantities of cherries. But still, it will take at least 10 minutes to peel one kilogram of berries.

Pin or paperclip?

Alternatives to a pin are a paper clip and a paper clip. Their operating principle is the same. The arched base of a pin or pin is inserted into the hole of the cherry in the place where the stem was attached, and the pit is pulled out. It should be noted that you need to use not the part of the pin where the fastener is located, but the opposite one.

These are the most accessible methods for pitting cherries. The use of such simple devices allows you to save a lot of time, while the juice does not splash in different directions.

Garlic press to get rid of seeds

You can also use it to remove pits from cherries. The simplest, inexpensive model with a special through hole is suitable for this. Her photo is presented below.

How to quickly remove pits from cherries using a garlic press? A cherry is inserted into the hole located on the handle on one side, with the stem attachment point facing upward. When you press the handle, the pin, which is on the opposite side, is pushed into the hole and squeezes out the bone. The operation of all similar mechanical devices for pitting cherries is based on this principle.

An easy way to remove pits from cherries

For this method you will need a bottle with a narrow neck and a stick (you can take a sushi stick or a cocktail straw). How to remove pits from cherries using them?

A cherry is placed on top of the narrow neck, with the hole from where the stem is attached upwards. You need to press into this place with a stick and pierce the berry. This way, the pit will end up in the bottle, and the peeled cherry will remain on the neck. Wooden stick, a cocktail straw or a match - any object that can push the pit out of a cherry will do.

Mechanical cherry pitter

Since it is quite difficult to remove pits from cherries manually, special ones were invented to make the work of housewives easier. mechanical devices. Outwardly they look different, but the principle of operation is the same for all.

It is arranged as follows. Each berry is placed separately in a special place with a through hole, after which the seed is pushed out with simple pressure. This method has undoubted advantages. Firstly, in order to pull out the bone, you do not need to catch it with a hairpin, pin or fingers. In any case, it will be squeezed out of the berry. Secondly, even in such a matter as removing pits from cherries, skill is needed, and with the help of this device it will take very little time to carry out this action.

This mechanical method getting rid of pits, like all the previous ones, has several visible disadvantages. Each berry must be placed evenly into the separator with the stem facing up. In addition, your hands end up dirty anyway. Plus, with this removal of seeds there is loss in the form of pulp and juice.

Today, the only true alternative to previously proposed methods is to remove the seeds using special device, designed for a large volume of berries.

Special machine for removing cherry pits

To process a large volume of berries at home, a special mechanical device for removing seeds “Cherry” is suitable. It is made from food grade plastic. It has a tray into which berries intended for processing are poured and a container for the removed seeds. The finished peeled berries fall into a container placed next to the device. The main advantage of such a device is that it minimizes hand contact with the juice.

The cherry pitting machine has a rubberized backing on the bottom, which allows you to firmly fix it on the table. This is very convenient compared to other devices that need to be held in your hands.

How to pit cherries? Clean, dried berries are placed in a tray located at the top of the device. Now, with one click on the ejector, the processed ready-made cherries are poured through the groove into a substitute container, and the seeds end up in the container at the bottom of the device.

Using a special machine for processing pitted cherries allows you to make the most efficient use of your free time, since this method is the most effective and efficient.

Large industries use automatic machines for processing berries. They are designed to remove seeds from large volumes of cherries (up to 90 kg per hour). Such heavy machines are not used at home.

How to make your own device for removing pits?

Many craftsmen prefer not to buy an expensive device, but to make it themselves, especially since the principle of their operation is the same. With its help you can quickly remove the pits from cherries.

The device is made of a tube with a diameter of 22 mm and a wall width of no more than 1 mm. It can be metal, for example aluminum, from stainless steel or plastic. It is important that the metal used to make the pipe does not oxidize, as this can affect the taste of the berries.

The spring can be taken from a mechanical toy. It should ensure soft operation of the device: push well and quickly rise to the reverse position.

A homemade machine consists of a small pipe about 7 cm long and 22 mm in diameter, a special hole with a diameter of 10 mm where the berry will be placed, and a pusher with a spring, which can be used as a regular nail. The principle of operation of such a device resembles ballpoint pen, working on a spring. With one press of the pusher, the pit is squeezed out of the cherry, after which it returns to its original position.

All the methods proposed above for removing pits from cherries are effective in their own way. In this case, each housewife will choose the most suitable optimal option for herself.

Summer is the best time of the year, because with the arrival of the summer season, we can enjoy delicious and sweet cherries or cherries, and make preparations for the winter. Of course, for those who don’t have their own dacha, cherries can be purchased at the market, because in the summer they are much cheaper and healthier.

If you are one of those who are tired of getting your hands dirty and poring over every cherry to get the pit, then this is the place for you. We present to your attention three simple ways, how to quickly remove the pit from a cherry, and hardly get your hands dirty.

In truth, today there are special devices that can easily remove hard seeds from any berry. However, why spend a lot of money on something that you can do for free with your own hands and without any effort? special effort? Therefore, be sure to use today’s tips and you will forget about this problem forever.

Method number 1: “Bottle”

This method is the fastest and easiest, with the least amount of dirt on your hands. This is what we recommend using. For this you will need: several cocktail straws or Chinese chopsticks, and a bottle of wine or cola. And then, everything is very simple.

You need to place a berry on the neck of the bottle and pierce it all the way through the middle with a stick. This way, the seed falls straight into the bottle, and the berry and your hands remain clean. You can see how easy it is to do this below.

Method number 2: Tweezers

Pull out the bone using tweezers. It's quite simple. Plus this method the fact that the berry remains absolutely intact.

Method number 3: Paperclip

If you don’t have tweezers, you can use a regular paper clip, or even a hairpin will do. To remove the seed, you need to use it like a spoon. This method is certainly effective, but it can get your hands a little dirty.

It is known that cherry pits contain hydrocyanic acid, a toxic substance that, when ingested in large quantities, causes poisoning. Therefore, no matter how uninteresting the extraction of seeds may be, they need to be removed, especially if the compote or jam is planned to be stored in jars for more than a year. In this difficult matter, all means will only help. How to remove pits from cherries manually without special devices To get rid of pits as quickly as possible, the whole family, including children, is involved in the process of removing them. In this case, the simplest and most common way is to extract them manually. How to quickly remove pits from cherries without the help of special tools? Everything is elementary: the index finger is inserted into the hole where the twig was attached, and with its help the bone

This method, although considered simple and not requiring the purchase or preparation of special devices, is completely uneconomical. With your fingers, in addition to the pit, you squeeze out a large amount of cherry pulp and juice. In addition, after this procedure, your hands remain red for a long time from cherry juice. Therefore, in order to efficiently remove pits from cherries at home, it is better to use other, more rational methods. Using a hairpin Every woman in her home should have a simple hairpin. Using it, you can quickly and with minimal losses, in the form of cherry juice and pulp, remove pits from cherries.

Pin or paperclip? An alternative to a pin is a regular safety pin and a paper clip. Their operating principle is the same. The arched base of a pin or pin is inserted into the hole of the cherry in the place where the stem was attached, and the pit is pulled out. It should be noted that you need to use not the part of the pin where the fastener is located, but the opposite one.

Mechanical cherry pitter Since it is quite difficult to remove pits from cherries manually, special mechanical devices were invented to make the work of housewives easier. Outwardly they look different, but the principle of operation is the same for all. The cherry pitting machine is designed as follows. Each berry is placed separately in a special place with a through hole, after which the seed is pushed out with simple pressure. This method has undoubted advantages. Firstly, in order to pull out the bone, you do not need to catch it with a hairpin, pin or fingers. In any case, it will be squeezed out of the berry. Secondly, even in such a matter as removing pits from cherries, skill is needed, and with the help of this device it will take very little time to carry out this action.

That mechanical method of getting rid of seeds, like all the previous ones, has several visible disadvantages. Each berry must be placed evenly into the separator with the stem facing up. In addition, your hands end up dirty anyway. Plus, with this removal of seeds there is loss in the form of pulp and juice. Today, the only true alternative to previously proposed methods is to remove seeds using a special device designed for a large volume of berries. Special machine for removing cherry pits To process a large volume of berries at home, a special mechanical device for removing pits “Cherry” is suitable. It is made of food-grade plastic. It has a tray into which berries intended for processing are poured and a container for the removed seeds. The finished peeled berries fall into a container placed next to the device. The main advantage of such a device is that it minimizes hand contact with the juice. The cherry pitting machine has a rubberized backing on the bottom, which allows it to be firmly fixed on the table. This is very convenient compared to other devices that need to be held in your hands. How to pit cherries? Clean, dried berries are placed in a tray located at the top of the device. Now, with one click on the ejector, the processed ready-made cherries are poured through the groove into a substitute container, and the seeds end up in the container at the bottom of the device.

Using a special machine for processing pitted cherries allows you to make the most efficient use of your free time, since this method is the most effective and efficient. Large industries use automatic machines for processing berries. They are designed to remove seeds from large volumes of cherries (up to 90 kg per hour). Such heavy machines are not used at home. How to make your own device for removing pits? Many craftsmen prefer not to buy an expensive device, but to make it themselves, especially since the principle of their operation is the same. With its help you can quickly remove the pits from cherries. The device is made of a tube with a diameter of 22 mm and a wall width of no more than 1 mm. It can be metal, such as aluminum, stainless steel or plastic. It is important that the metal used to make the pipe does not oxidize, as this can affect the taste of the berries. The spring can be taken from a mechanical toy. It should ensure soft operation of the device: push well and quickly rise to the reverse position. A homemade machine consists of a small pipe about 7 cm long and 22 mm in diameter, a special hole with a diameter of 10 mm where the berry will be placed, and a pusher with a spring, which can be used as a regular nail. The principle of operation of such a device resembles a ballpoint pen operating on a spring. With one press of the pusher, the pit is squeezed out of the cherry, after which it returns to its original position. All the methods proposed above for removing pits from cherries are effective in their own way. In this case, each housewife will choose the most suitable optimal option for herself.

Send

Cool

If you remove the pits from cherries, you can store the finished cherry product for more than a year. Cherry is delicious and most useful gift Mother nature. Who among us doesn’t smile and remember grandma’s cherry jam and compotes - this wonderful nostalgia from childhood? Do you remember how your mother made jelly from this berry for you, and how you helped her remove the pits from the cherries?

This long and monotonous process has an unimaginably deep and serious meaning, no matter how ridiculous the procedure itself may seem to you.

The seed of a cherry or sweet cherry contains the glycoside amygdalin - this is a very dangerous toxic substance. The product of its excretion is cyenelic acid, an excess of it will lead to unpleasant and sometimes sad results.

You cannot be poisoned by amygdalin by eating fresh cherries.

When preserved cherries are stored for more than a year, the cyanoacetic acid formed in its seeds begins to be released, which can easily cause serious poisoning.

If you plan to store cherry compote or jam from this berry less than a year, then it is not necessary to remove the seeds.

Removing seeds manually

To get pits from cherries, housewives need everything: from improvised means in the form of standard hairpins to household units. More often they use the “old-fashioned” method - peeling the berries with your own hands.

How to remove pits from cherries at home? The technology is simple: we pinch the cherry between the middle, index and thumb fingers, then with the nail thumb we pry up the seed in the place where the stalk is attached and push the seed out.

This method is effective because with special dexterity the process is fun and fast: the bone itself flies out into the palm of your hand.
But it will be difficult to get rid of the burgundy berry “blood” on your hands. Although, they say that cherry or sweet cherry juice helps to get rid of laundry soap, brush and baking soda.

If you are too lazy to tinker with cherry seeds, you can use improvised means for this task.

The only condition is a loop at the end.

Safety pins and hairpins can easily remove the pit from a cherry. We bring the cherry into their loop (at the place where the stalk is attached), grab the seed and separate it from the pulp.

Craftsmen have gotten used to using a cocktail straw to squeeze out the pits from cherries. With its help, they simply punch the berry in the center, while the seed pops out on the other side of the tube.

You have to adapt and learn how to remove the seeds from cherries, the video will help you with this.

https://miaset.ru/education/tips/bone.html

“Automatic machines” will help you!

Manual removal pitting cherries using improvised means is a rather “bloodletting” process.

Lovers of delicious preserved berries use special automatic devices.

Cherry pit remover

We place each cherry separately in the “groove” of the device and lower the lever. At the same time, the bone is rapidly pushed out.

The removal process is faster than pin “removal”;
There is no need to “catch” the seed.

The cherry should be placed in the separator, as they say, with surgical precision;
The berry is pierced through, which worsens its final shape;
Large losses of liquid and tender pulp;
Soiled hands.

Cherry pitting machine

The device is suitable for people who dream of handling a large volume of cherry seeds while maintaining a decent pace of work. These mechanical devices are indispensable for recycling large quantity berries

The cost is on average 400 - 500 rubles, which is inexpensive, because its invaluable help in preparing all kinds of delicacies is obvious!

The cherries are placed in a large batch, and the ready-made berries go down the chute, jumping into a placed plate. The bones are stored inside the device.

Clean hands;
The loss of valuable juice is insignificant;
Maximum processed cherries - minimum time.

Sometimes you have to transfer the berries manually by opening the device;
The cherries are pierced through;
The silicone gaskets of the device sometimes come off - without them the device does not work;
About 15% of berries that have already been processed retain the pit.

Exclusive desserts

Cherry cake without baking

0.5 kg of cottage cheese;
0.5 kg sour cream;
0.5 kg cherries;
0.5 kg sugar;
200 gr. sweet cookies;
100 gr. oils;
50 gr. gelatin;
pack. cherry jelly;

Pour gelatin with 0.5 ml of water until it “swells”. Grind the cookies into crumbs, remove the pits from the cherries.
Mix melted butter with bread crumbs. Form the cake and place it in the mold.
Make jelly (according to package instructions). Create the cream: beat sour cream with cottage cheese, add sugar. Pour gelatin into the mixture and mix everything.
Grind 1/2 of the cherries into puree in a blender.
Add to the cream, stir, pour over the shortbread. Place in the refrigerator for 30 minutes.
Decorate the cake with cherries and fill it with fruit jelly. Put it back in refrigerator at 13 o'clock.

Cheesecakes Kiev style

Cherry blossom season is truly a beautiful sight. The whole tree is in white and pink flowers, the greenery is practically invisible, and what a aroma spreads around. The further ripening of this berry is not only a tasty harvest, but also the hassle associated with its processing.

Among the housewives, questions are beginning to be discussed about how to correctly and quickly remove the seeds from. This is painstaking and long lesson, which everyone wants to get rid of quickly.

All your favorite dishes and drinks: dumplings, or with cherries are not prepared without pre-treatment berries Agree, it’s not the most pleasant sight to eat a cake and spit berry pits at the table.

Attention! Cherry pits contain a toxic substance - hydrocyanic acid. Its consumption in excess of the norm causes acute food poisoning.

How to remove cherry pits?

The most popular method of removing cherry pits is considered to be manual. Here you can call on your household members to help so that the process goes quickly and fun.

So, let's take a closer look:

Place your index finger where the twig attaches to the berry and gently push out the seed.
Probably the most affordable way. Just cut the berry in half and remove the seed.

Important! All methods of removing seeds manually are to a certain extent combined with the loss of juice and pulp of the berry. And it’s difficult to wash your hands after such work.

To make the process more aesthetically pleasing, you can use available tools:

Using a hairpin. It is placed in the place where the twig is attached to the berry, the seed is attached to the base in a circular motion and pulled out. This method significantly speeds up the processing of aromatic berries.

Attention! Before you remove pits from cherries at home using improvised means, you should make sure that the item you choose has a loop at the end.

Using a pin. The method for removing the bone is similar to that of a hairpin. You can also use a paper clip. You need to use the opposite part of the safety pin.
Using a straw. The place where the stalk is attached is pressed with a cocktail tube, it pierces the berry right through and the seed flies out. It is advisable to carry out the process over a container so that the berries and juice do not fly in all directions. A match or wooden stick will also work for pushing out.

Using a garlic press. The cherry is placed in the recess located on the handle of the press with the stem facing up. When pressure is applied, the pin on the other handle connects and pushes the bone out. A simple model will do for this method.
Using a peeler. The potato eye blade breaks the integrity of the cherries, but they are suitable for making jams or baking fillings.

Curious! There are well-known craftsmen who use eyebrow tweezers to pierce the berry and remove the seed. You need to grab it with tweezers and rotate it to pull it out. As they say, all methods are good.

How to remove pits with a separator?

This device looks like a garlic press. Consists of a bowl and a lever. The principle of its operation is to place each cherry separately in a special chute.

Extrusion is carried out due to mechanical action.

The separator speeds up the work process, and there is no need to catch the bones, as is the case with a pin or hairpin. They will be deleted. But your hands will still get dirty with juice. A appearance berries are deteriorated due to a through puncture.

Note! How smaller size device, the worse its performance and the greater the consumption of cherries.

How to remove pits with an automated machine?

If cherries are your favorite berry, and jam made from their fruits should always be on dining table, then you should think about purchasing a machine for extracting seeds.

It is suitable for processing a significant volume of berries. Made from food grade plastic. Equipped with a tray for pouring berries and a container for extracted seeds. The machine has a rubberized base, which allows it to be firmly installed on the countertop. This is in contrast to other methods, where all actions were carried out by weight.

The machine method is the most effective and efficient:

Clean hands;
A small percentage of loss of cherry juice;
Minimum area of contamination;
Elementary way of working.

But an automated machine is not ideal. The cherry is still pierced through and 15% of the berries remain along with the seeds.

There are industrial devices for large industries, various restaurants, and bakeries. Improved devices can process up to 100 kg of berries in one hour.

Note! There are devices on sale not only for removing seeds from berries, but also for large fruits - apricots and plums.

All of the above methods are good in their own way. Each housewife chooses the one she likes best.

By the way, it is believed that the seeds do not need to be removed if the life of the cherry jam or other product does not exceed six months.