A bathhouse with an attic is very often found in catalogs of finished projects, as it is optimal for complete relaxation. A simple one-story building without an attic has insufficient area to accommodate a comfortable recreation area. A two-story bathhouse is already a significantly expensive construction, which is more suitable not for a temporary bathhouse, but for permanent residence, like a bath house.
This 6x8 log sauna project has everything you need for comfortable rest with a large group of friends.
At the entrance to the bathhouse there is small porch, it is also a terrace with an area of 6 m². On the right on the plan you can see the bathroom, but it will be tightly hidden by the walls and you can only get into it from interior spaces. Passing through the terrace we find ourselves in a large relaxation room with an area of almost 20 m². In such spacious room can be placed a large number of furniture, comfortable table, designed for a company of several people and even then there will be room for free movement.
Immediately to the right of front door There is a washing room with an area of 6 m² with two exits. The first leads to a small bathroom of about 4 m², the second leads to the steam room itself, the same size as the wash room.
The rest room has a large double-hung window located on long wall on the left and a staircase to the attic floor. The second floor is quite simple - one a large room and exit to the balcony. A room with an area of more than 28 m² can be used either as a bedroom, if periodic living in the bathhouse is planned, or as another recreation room, which can additionally accommodate a billiard table, table tennis table or exercise equipment.
Bathhouse made of 6x8 timber
This project is designed for laying walls from profiled timber 90x150 mm. The plan of the bathhouse is quite simple.
Unlike in the previous project, here from the terrace you can get not only into the rest room, but also into a small storage room, which can also be equipped as a toilet. There are two doors in the rest room: one leads to small room, which with an area of 1.875 m² is best suited for a toilet or storage room. The second door opens into the washing room and from there you can enter the steam room with an area of 6.25 m².
In addition, on the first floor in the very corner there is a staircase to the second floor. His total area 36 m² is a lot for one room, so if desired, the room can later be divided into two using a partition. You can also simply divide it into zones using the possibilities of interior design.
Two-story house-bath 6x8
Spacious sauna house made of profiled timber natural humidity designed as comfortably as possible for permanent residence in the warm season. The first floor begins with a small terrace of 11.2 m², the entrance to which is from the end.
From here, through the door on the left, we immediately enter the relaxation room, and the rest of the space can be used for relaxing in comfortable summer chairs. The room has an area of 19.43 m² and has two single-leaf windows, a door to the washroom and access to the second floor via a direct staircase. The second room in the attic is 22 m² and thanks to the design hip roof It has full walls and a ceiling height of 2.2 meters, which is perfect for daily living.
The bathroom is separated from the washing room on the first floor, which will perfectly protect the main living space from unnecessary odors. The steam room is quite compact, 2x2.5 meters, and the area is equal to the washing room. Despite this, 3-4 people can steam in it quite comfortably.
Bathhouse with attic and corner roof
The original layout is well suited for those who love a lot of light and non-standard shape interior spaces. Passing small terrace 3x2 meters we get into even more compact hallway with dimensions 2x2 meters. Here you can place everything necessary for arranging the wardrobe and storing the shoes of people entering the bathhouse. Such an entrance hall with an area of only 4 m² may seem like a strange solution, but in practice it is guaranteed to protect the main room from unnecessary dirt and dust.
Owners land plots Often a bathhouse is built in which you can calm your nerves and get rid of stress. Bathhouse project 6 by 8 m in in this case- this is an excellent choice, if, of course, the area of the plot allows it. Since ancient times, the bathhouse has been famous for its miraculous powers. The benefits of hygiene procedures of this type are undeniable, but you can get them in full only in the right steam room.
The steam room is the most important room in the bathhouse. You need to pay attention to it Special attention, but do not ignore other rooms. For example, without comfortable room For relaxation, there cannot be a full completion of bath procedures. In addition, the bathhouse must have a washing room, but, if possible, other rooms can be equipped.
If the free space is plot of land allows you to build a large building, you can build a house project with a bathhouse from 8 by 6 m timber. They are often made, and the second tier is partially occupied by an attic. Thus, it turns out a whole bath complex with a private balcony where you can have a good time in good weather. The room itself, 6x8 m, allows without special problems equip several rooms, for example, a spacious steam room and washing room. But the second floor will already be occupied by a recreation room, an attic for a pleasant time in fresh air, and maybe even a bedroom for the most tired guests. Often a terrace is attached to the bathhouse. It serves the same role as the attic, but on the ground floor. On the terrace you can gather for barbecue or just drink tea while rocking in a rocking chair.
Is it worth building a bathhouse with an attic?
If there is enough space on the land to build a bathhouse, the size of which will be 6x8 m, then such an area will be quite comfortable enough to accommodate a large company. However, many go further and build two-story buildings for a bathhouse. In this case excellent option There will be an attic on the second floor.
This point needs to be thought through at the stage of creating the project, since the construction of an attic will require less building materials, so you can save on their purchase.
It is worth noting that when creating a project for a house with a 6 by 8 m bathhouse, you need to pay special attention to the buildings. If it is two-story, then its base should be as strong as possible.
The design of a 6 by 8 m bathhouse with an attic allows you to make the most efficient use of the available land. In this way, you can get the optimal amount usable area, which can easily accommodate a company of 5-6 people. Moreover, buildings with attics always look very attractive in appearance, so the bathhouse will become a real decoration of the territory, and it will never be a shame to invite guests to take a steam bath.
What should you consider when building a bathhouse?
The most important stage during project implementation two-story bathhouse 6 by 8 is to create a foundation.
If you are planning a bathhouse with an additional terrace, you need to immediately take care of the foundation for this balcony.
Even at the design stage, you need to think about heating and ventilation systems. The larger the room and the number of rooms, the more difficult it will be to resolve this issue. If in a small steam room it is enough to simply install an additional window under the ceiling, then in a steam room on big company this will clearly not be enough. A ventilation system should be provided not only in the steam room, but also in other rooms. Bathhouse is always high humidity And abrupt change temperature. If you take the wrong approach to arranging the ventilation and heating systems, you can end up with moldy walls and damaged furniture and appliances.
To protect other rooms as much as possible from moisture from the steam room, it is necessary to provide high-quality waterproofing. Not only the walls and floor, but also the ceiling must be treated with special materials so that steam does not spoil the second floor. In addition to the fact that steam and waterproofing saves the building from high humidity, this is an additional advantage for the steam room, which becomes of higher quality.
It should also be noted that the main and traditional material Wood is used to build the bathhouse. Considering the presence of a stove and high temperatures, a fire cannot be ruled out here. Therefore, even at the stage of planning a bathhouse, it is worth considering the system fire safety. Fire extinguishers must be provided in every room and on every floor. The wood from which the bathhouse will be built must be treated with a special solution that significantly reduces the likelihood of wood fire and protects it from fungus and pests.
First floor
A 6x8 m bathhouse is a large building where you don’t have to save every square meter. cm when arranging furniture. If we are talking about a two-story building, then it is possible to equip an entire bathhouse complex.
A steam room and a washing room must be located on the ground floor.
There is no point in moving these rooms to the second floor, as this will make a bathhouse project measuring 6 by 8 m much more expensive. In addition to these two rooms, a spacious dressing room can easily fit on the ground floor. From there, a staircase will lead to the second floor. The main exit from the bathhouse will also be located here. It is advisable to make another small corridor between the dressing room and the street to prevent cold air from entering the bathhouse.
Separately, it is necessary to say about the foundation for the bathhouse according to the project 6 by 8 m. For two-story premises it must be strong enough. However, if lightweight materials were chosen for the construction of the bathhouse, you can limit yourself not to a full-fledged foundation, but to concrete support pillars that need to be installed along the perimeter of the future structure.
The distance between the supports should not be more than 2 m. It is worth choosing a durable and reliable cinder block as a material for the foundation.
Second floor
On the second tier you can place a comfortable room for relaxation, tea drinking and even a bedroom. If residential premises are provided here, you need to carefully consider the heating design. Otherwise, these rooms can only be used in warm weather. If everything is properly equipped, then 2-3 people can live in a two-story bathhouse all year round. When drawing up a project for a two-story bathhouse 6x8 m, you should pay attention to the height of the ceiling. If you make the upper rooms too low, this will lead to discomfort and will not allow you to fully relax in the bathhouse. Optimal height
The ceiling of the second floor in the bathhouse will be 2.2-2.5 m.
As for the roof covering, it must be of high quality and laid correctly. It’s better to take care of this detail right away so you don’t have to deal with a leaking roof later. Depending on your financial capabilities, you can choose slate or tiles as a covering.
Most of the projects for the second floor of a bathhouse include a living room, and sometimes a relaxation room, a bedroom and a balcony - an attic. However, if you wish, you can install a bathroom, an office and others here. useful rooms
. An area of 6x8 m allows you to fully implement any interesting ideas.
Attic and terrace
In both cases, it will be something like the familiar balcony or veranda. If the extension is located on the ground floor, then it will be called a terrace, and on the upper tier - an attic. Where to install this addition to the building is decided by the owner of the house. If finances are not limited, you can implement a 6 by 8 m bathhouse project with a terrace and an attic on two floors. It is very pleasant to spend time on the terrace or attic after visiting the steam room, if the weather permits. IN winter time
Some land owners who choose 6 by 8 m bathhouse projects with an attic or terrace make these extensions glazed. In this case, they can be easily used in rainy weather and even in cold weather. However, in summer, a light breeze will not be able to fully break through the glass and delight everyone present in the room with its light breeze.
An excellent option would be to glaze the attic on the top floor and make the terrace open. So, you can just enjoy it in bad weather good view from the balcony, and warm evening spend time with a cup of tea on the terrace. On the other side, glazed terrace on the ground floor it can become an additional vestibule that will not let the cold from the street into the main room.
In general, there can be many options, but everything needs to be thought through at the bathhouse design stage.
If we consider the standard projects offered on various resources, then a 6x8 bathhouse with an attic is very popular. For countryside holiday, when people do not live in the house permanently, this is a rather convenient option.
Pros and cons of combining a house with a bathhouse
Bathhouse with an attic underneath gable roofFirst, let's define the terminology; we are not talking about a sauna, which is not uncommon in country houses, but about a real Russian bathhouse with wet steam and a wood-burning stove. Let's start with the arguments "against", because the arguments "for" were expressed in the article.
- Firstly, a guest bathhouse with an attic must be equipped with good ventilation system, to high humidity steam room and sink did not apply to residential premises. In addition, you will need to pay special attention to the careful installation of waterproofing in the bathhouse premises.
- Secondly, in warm weather you will have to living rooms do something about the increased temperature, since as it cools down, the steam room will transfer heat to the entire house. Installing air conditioners can be a solution to the problem.
- Third, the presence of a wood stove creates a fire hazard for the entire structure. Of course, any oven requires careful attention. But it all depends on the accuracy of the owners. Until recently, the majority Russian houses heated wood stoves, which does not prevent them from existing safely today.
Let's consider the most common designs of 6x8 baths with an attic, in which part of the premises are residential.
House-bath with a sloping roof and a balcony
IN this project It is planned to construct a support-column foundation from reinforced concrete blocks, which are assembled into pedestals. Each cabinet contains four blocks with dimensions 200x400x200. The walls of the log house are designed from profiled timber 90x140 with an external surface from a block house. The roof of the building is gable and broken. Rafter system mounted from layered and hanging rafters, made of timber 50x100. Layered rafters form a steeper slope angle and allow you to increase the area of the attic space. The roof covering will be made of Euro slate, the lathing under which is planned to be laid from unedged boards 20 mm thick. Partitions between rooms will be built according to the frame-panel principle. The 6 x 8 bath house in question with an attic on the ground floor has a steam room, sink, bathroom and rest room. The entrance from the porch leads to a small vestibule-dressing room; access to the attic floor is carried out from the rest room. The floors are designed as double floors: first a rough floor made of boards 20 mm thick, then glassine is laid over it, followed by one layer of URSA insulation 5 cm thick, everything is covered with a tongue-and-groove board 27 mm thick. The ceiling is hemmed with grade “B” Euro lining; an additional layer of URSA insulation 5 cm thick is laid. Waterproofing in the steam room is carried out using foil, the room will be sheathed with aspen lining. The planned ceiling height is 2 m 25 cm. A shower tray will be installed in the washing room. The bathhouse will be equipped sewer system. On the second floor there are two rooms: a bedroom and a living room with open balcony like a loggia. The ceiling height will be 2 m 20 cm. This house can comfortably accommodate a family of two or three people.
Plan of the first and attic floors baths
Let's consider next project bath houses with a 6x8 attic, which has a slightly different layout.
Bath house with veranda and attic
This project can be built from timber or logs. The cutting is supposed to be done in a bowl. The roof is covered with metal tiles or composite tiles. Attic room in this project it is arranged under a gable roof with straight slopes. Its area is quite large - 28 sq.m. Daylight attic involves the installation of special skylights on each of the slopes. The house is heated by a stove installed in the center of the building; a pipe will pass through the center of the attic to the roof. Additional heating can be gas or electric.
Plan of the first floor of a residential bathhouse with an attic Let's look at the plan of the first floor of the bathhouse, which is shown in the photo at the beginning of the article. Entrance to the building is through closed veranda, from which we enter the hall. In the hall there is a staircase leading to the attic and two exits: to the kitchen-living room and to the relaxation room at the bathhouse. The stove, apparently, should be fired from this room. Its location involves combination with a stove or fireplace on the side of the kitchen-living room.
In the previous project, the division of rooms of different functionality was designed floor by floor: everything for the bathhouse is on the first floor, everything for living is on the second floor. The area of the first and second floors is approximately equal; it is no longer intended to live here permanently, but to come for a while.
The project under consideration for a 6x8 bath house with an attic allocates most of the premises for living. The attic is almost 30 sq.m., the kitchen-living room is 10 sq.m., and the steam room, sink and relaxation room are all over 4 sq.m. It is intended to live in this house and use the bathhouse periodically. It is designed for a small family, like the previous version.
Another project can be seen in the video:
If you have built a wooden cottage or Vacation home made of profiled timber, then a Russian bathhouse next to it will not hurt you. This is in big cities Nowadays it's fashionable to take a steam bath Finnish sauna, and in the Russian outback and in suburban villages, bathhouses made of timber are more common. First of all, this natural material, implemented in finished form and does not require additional processing. Bathhouses from 6x8 timber can be built without special effort. Construction process similar designs won't take much time.
When planning such an object on your site, you need to take into account how many people the bathhouse is designed for, so that it is convenient for the whole family to wash in it. Again, the parameters of the site are also taken into account. Construction companies offer finished projects baths of various sizes, among which everyone can choose the most good option for myself. Baths made of 6x8 timber are designed in one or two floors, with an attic or terrace. The main thing that a developer should take into account when wanting to build such an object on his site is that the bathhouse should be easy to use. In addition, it must correspond to the interior of the main building.
On the site construction projects you can find several options for buildings, as well as step by step instructions By self-construction baths from finished timber. In any case, bathhouse projects include a dressing room, shower and steam room, and interior decoration performed by clapboard.
Walls and partitions
External walls are made from the material chosen by the customer for construction ( solid timber, laminated veneer lumber, rounded logs). Internal partitions- frame, sheathed with class “B” clapboard on both sides. Under the lining frame partitions insulation is laid - glass staple fiber 50 mm thick, the insulation is laid on both sides with a vapor barrier membrane.
Floors
Double bath floors: subfloor - edged board 18-20mm thick, finished floor - planed tongue-and-groove board 30-40mm. Floor joists are made with a section of 150x50mm, beams are installed in increments of ~0.5m.
The floors are insulated with 50mm thick glass staple fiber, the insulation is laid on both sides: on the bottom - with a wind- and moisture-proof vapor-permeable membrane, on top - with a vapor barrier membrane.
Ceilings
The ceiling of the first floor is insulated with 50mm thick glass staple fiber with two layers of vapor barrier. Hemmed with class "B" clapboard at the bottom ceiling beams. Between the beams, insulation is laid - glass - staple fiber 50 mm thick, the insulation is laid on both sides with a vapor barrier membrane. Internal ceiling height 2.1 m.
Steam room
Inside the steam room, shelves-beds are assembled on two levels with backrests made of 18-20 mm aspen boards.
In the steam room, a door made of thermal glass is installed, the dimensions of the frame are 1.9 x 0.7 m.
Attic
The attic is not insulated as standard. The attic floor is planed tongue and groove board 30-40mm. The ceiling in the attic is hemmed horizontally at a height of ~2.4 m.
Doors and windows
Entrance and interior paneled doors are installed in the bathhouse. Panel doors are not equipped with handles for opening and locks. Windows are installed wooden double glazing, size 0.6x0.6m and 0.9x0.9m.
Roof
The roofing is galvanized steel in the form of corrugated sheets.
