Drawing for shoes in the hallway. Assembling a shoe cabinet

A hanger, a bedside table for shoes, a mirror - this is where you begin to get acquainted with the apartment. They look especially interesting homemade elements interior Today we will tell you how to make a shoe rack.

Types of shoe cabinets - signs of an ideal shoe rack

You can develop an original shoe cabinet or use open sources. The second option will allow you to avoid mistakes and gain the necessary experience. A shoe rack in the hallway can be a simple two-row shelf or a carved casket with an advanced ventilation system. Today on thematic websites you can find a drawing of any furniture for shoes in the hallway.

Popular models include:

• Open shoe rack;
• Closed shelf - bedside table;
• A tall, narrow or elongated cabinet - “slim”;
• Standard shoe box combined with a mirror and bedside table;
• Chest of drawers. There are models with natural ventilation and equipped with ultraviolet lamps;
• Open or closed shoe rack (in demand among owners of large shoe collections);
• Galoshnitsa.

You can make any shoe rack from this list. But how to do it right? Here are the signs of impeccable shoe furniture:

• Ergonomics. The closet should be comfortable;
• Versatility. It is desirable that the shoe rack can be used as a stool or bedside table. If desired, you can install a mirror - you will get a homemade dressing table;
• Ventilation. Of course, there is no need to stretch the air duct system, install the supply and exhaust systems. Provide air circulation. It would be enough;
• Design. Furniture should not “stand out” from general style apartments. However, this nuance is resolved at the design stage.

With due diligence and care, anyone familiar with electrical and electrical equipment can create a shoe rack. hand tools. The main thing is to believe in yourself.

Basic model - open rack for drying shoes

Our task is not to create another masterpiece for the Hermitage. This shoe rack will appeal to people who value practical solutions without frills. This product is based on a classic dish drainer. Don't smile - it's comfortable and functional. You will see for yourself.

Such furniture fits well into the interior of an apartment decorated in a minimalist style. By the way, it is very popular among apartment owners and professional designers.

In a house where pets live, you need to hang lightweight glass or plastic doors on the counter. They will not prevent the shoes from drying out, but will save them from the fate of becoming a toy for a puppy or a sleeping place for a kitten.

A beautiful, comfortable shoe rack is a source of legitimate pride for a craftsman. However, several nuances need to be taken into account. The characteristics of furniture depend on the materials, fittings and tools. To a greater extent, the durability of the product is influenced by the material.

Shoe dryers are made from furniture panels - they can be bought at construction stores.Along with the materials, do not forget to purchase the accessories:

• Furniture metal corner – 8 pcs.;
• Self-tapping screws;
• Tsargi;
• Hinges for doors – 4 pcs.;
• Metal mesh shelf (quantity and size depend on your needs);
• Handles (choose based on your preferences).

The set of tools for work includes: tape measure, marker, screwdriver (hand drill), screwdriver, Sander(sandpaper), hacksaw or electric jigsaw, hammer and pliers.

After preparation, the shoe cabinet is assembled in a few hours:

1. 1. Having drilled the sides of the future shoe rack, fix the drawers and ends on it with confirmations, which also need to be drilled. With a depth of 5.5–6 cm, the diameter of the holes should be 5 mm, in the sides 8 mm, but they must match;
2. 2. Screw half of the corners to the lid of the product, the rest are fixed on back wall shoe racks will act as wall fasteners;
3. 3. All elements of the product are connected to each other with self-tapping screws. When assembling, check the geometry of the furniture - the diagonals must be the same;
4. 4. On the facade of the drying rack, make a marking under furniture hinges and hang the doors.

The distance between the wire shelves should be at least 0.3 meters - boots can be placed on the bottom one. However, for furniture made by yourself, there are no dimensions. of decisive importance: The dimensions of the product depend on your wishes. Shelves for shoes made of metal mesh will be more convenient if they are installed at a slight angle.

Wooden shoe rack - convenient simplicity

Later we will definitely amaze our friends and family with creativity, but for now we are learning. One of the simplest furniture options for storing shoes is wooden shelves. By the way, among aesthetically pleasing ordinary people, such products are called the fashionable word “slim”. But for us this is an ordinary cabinet with an elongated height.

To work we will need a standard set of tools described above, a lath, furniture metal corners and several boards 15–20 mm thick. Two of them will be the future sides of the shoe rack, the rest will act as shelves. The height and width of the boards depend on the size of your hallway and the number of shoes. Products with a height of 90 cm and a width of 60–70 cm are considered standard.

Stages of making storage for shoes:

1. 1. Using a tape measure and a marker, mark the cutting lines. We need two side racks and several shelves (the number depends on your desire);
2. 2. After marking, we cut the boards into pieces of the required size. Jagged edges can be adjusted using sandpaper or a sanding machine;
3. 3. We screw the corners to the future shelves with self-tapping screws, and then fasten them to the sidewalls;
4. 4. The rail will be needed to refine the front part of the wooden stand.

On final stage the product can be coated with a layer of varnish or acrylic paint. In fact, this furniture is the basis of most shoe racks. Let's prove this with an example. The next product is a two-piece shoe cabinet.

Shoe rack upgraded to shoe rack

The master determines the dimensions and material of the furniture based on his own needs. Can be used in production MDF boards, chipboard, wood, plywood. The last option is durable, although last stage it will have to be treated with varnish or paint.

Our future shoe store will be following sizes: width – 1100 mm, height –700 mm, depth –250 mm. You can change them according to your needs. We will use plywood as the main material. To create shoe furniture we will need the following parts:

• Lid and bottom. Two identical boards 1100 mm long and 250 mm deep;
• Sidewalls – 3 pcs. (two external, one central). Dimensions: height – 668 mm, depth – 250 mm;
• Horizontal shelves – 2 pcs. (526x250 mm);
• Front facades – 4 pcs. (311x518 mm);
• The back wall (696x1096 mm), for its manufacture you can use plywood or plastic several millimeters thick.

The dimensions of the parts are indicated with the necessary indents and gaps for cutting and edge cutting.

Components and consumables that cannot be made at home:

• Plastic sandwiches (overshoes) for side racks – 4 sets;
• Handles – 4 pcs. (according to the number of sections), self-tapping screws, confirmations, corners, minifixes, tape or wood glue.

Add an awl, drills and confirmation bits to the standard tools and you can start assembling.

At the first stage, a box is assembled from the side posts, lid and bottom. Minifixes are used as fastening elements. The next step is to install two internal shelves (fasteners - corners or minifixes).

In principle, there is nothing complicated in assembling such a product. By and large, this is a slightly modernized shoe rack. But you will have to tinker with the installation of overshoes. However, this process is described in the accompanying documentation. But just in case, here are the drawings:

The work is done in the following sequence:

1. 1. Marking;
2. 2. Fixing the shoe shoe on the side posts. Make sure that its movement is not hampered;
3. 3. Installation of plywood parts. Plywood plates are inserted into the grooves of the shoe shoe, after which they are fixed with screws or tenons.
4. 4. Screw the back wall;
5. 5. We hang the front doors and screw the handles to them:
6. 6. The final stage is the treatment of furniture with paints and varnishes.

Important! The dimensions of the parts are indicated with the necessary indents and gaps for cutting and edge cutting.

The greatest difficulty in the latter option is the installation of overshoes. However, the drawings and diagrams included with it will make your work easier. By the way, if you just hang the doors, you get a regular closed shoe rack.

In most cases, limited space is allocated for this room, so it is so important to use it wisely.

In the hallway, it is necessary to ensure that each item has its own place: in this case, you will not spend a lot of time getting ready. At the same time, if the clothes are simpler and have hooks, then it is better to provide special shelves for shoes and accessories or in the hallway. They will be discussed in this article.

Homemade shelves for the hallway: purpose and varieties

The shelves differ in the number of shoe compartments and in style. In addition, they can be either open or closed. They differ in depth, height and a number of other criteria.

One of the most common shelves for shoes is the so-called. It is a full-fledged autonomous structure.

Advice! Even if the space allows you to place several “shoe racks,” it is better to assume that the shelves should fit exactly as many shoes as all family members use in one season. It is much more convenient to keep the rest of the shoes in boxes.

Do-it-yourself shoe racks in the hallway: photos in one or another hallway style

If you make shelves with your own hands, then you have great opportunities organically fit them into. In this situation, it is much easier to maintain a uniform style for the room.

Let's consider which shelves are best suited for this or that popular interior style.

For what is popular nowadays, shelves made of natural materials. A tree would look especially appropriate. Such wooden shelves can be decorated with carvings and patterns. A two-tier model will look very authentic: the shoes themselves are located on the bottom shelf, and various accessories and small items are located on the top shelf. And if this two-tier shelf is “closed” on top with a “lid”, then it can be used as a convenient one for putting on shoes.

Shelves covered with a lid that extends slightly beyond the edges of the shelves look especially harmonious. Such shelves will fit perfectly into. If you are worried that this functional accessory will look too simple, then keep in mind that this is the main concept of the data stylistic directions. If you want something more luxurious for the hallway, then it is better to choose styles such as empire style, baroque or.

Advice! When using wood, keep in mind that it should be well soaked and covered with a protective layer.

Brief educational program: “How to make shelves yourself”

You can make shelves for the hallway yourself. To do this you will need time, patience and minimum required materials and tools.

It all depends on the material used to make the shelves. If you have chosen, then it is advisable to prefer ready-made, processed boards, which can be purchased in modern construction stores. In this case, making a shelf will not cause any particular difficulties. However, if you decide to do everything entirely with your own hands, then you will need the following tools and parts:

• plane;
• emery;
• special glue for wood;
• metal corners;
• screwdriver or screwdriver;
• saw;
• self-tapping screws;
• roulette;
• pencil.

We suggest using standard wooden board from 25 to 35 cm wide and a couple of centimeters thick.

First you need to cut out the vertical side walls. Each of them should be approximately equal to 80-90 cm. Prepare support bars, as well as crossbars. Then start cutting out four pieces that will become the shoe shelves. Their size should be approximately 60-70 cm.

To create a round shelf on casters you will need some materials and tools:

• screws, plastic caps – 16 pieces;
• chain, studs;
• rollers (4 pieces), screws;
• hammer, glue, drill;
• parts for separating elements made of 12 mm wood - 8 pieces;
• elements for the base made of 12 mm wood - 3 pieces;
• grinding machine;
• workbench, pencil, tape measure;
• White paint;
• clamps;
• upholstery filler, fabric.

The process of making the shelf itself is quite simple.

• First, you should make 3 circles of equal size from wood. You can draw circles with a pencil, using a chain and a nail installed in the center of the wood.
• Wood circles are cut with a jigsaw.
• The finished circles are placed on top of each other, and their edges are polished.
• Then you have to draw the inner circles on the main ones. They must be 170 millimeters from the edge of the main product to accommodate dividers with a width of 160 millimeters.
• Each divider is positioned diagonally so that its inner edge aligns with the inner circle. 140 and 40 millimeters from the edge are marked.
• After marking, 2 mm holes are made at the resulting points. It is necessary to drill holes in the lower and upper parts of the separating elements.
• Screws are placed in the resulting holes.
• Dividing bases are screwed to one of the circles.
• The second circle is placed, the dividing bases are screwed on.
• The third circle is attached to the dividing bases.
• All that remains is to glue the caps onto the screws, paint the product, attach the rollers, and cover the upper part of the shelf with fabric with filler.

The result will be a practical and functional shoe shelf - a bench.

PVC pipe shelf

You can make shoe racks with your own hands from ordinary PVC pipes. It is recommended to take new products. The diameter of the pipe should be 300 millimeters. The length of the product is usually 3 meters, so it should be cut into 10 pieces of 30 centimeters each, respectively. One pipe should reach thirty centimeters because shoe size 42 is 30 centimeters.

Each section of the pipe can be originally designed to look like birch.

• Wallpaper with the appropriate pattern is taken and each PVC piece is covered with it.
• Next, 4 blanks are glued together with glue and fastened with clamps to each other. This will be the foundation shoe shelf.
• Then 3 pipes are glued to it on top and 3 for the base.
• After the parts have dried, you can begin to use the product.

Shelf made from a wooden box or pallet

You can make a shoe rack from ordinary wooden box, which can be found at the dacha. All you have to do is take a box and paint it bright color, the product will look bright and modern, and it can be used to store shoes. You can take several boxes and paint them in different colors. This way, each family member will have an individual place to store boots and shoes.

You can use a wooden pallet in the same way. It is enough to decorate it with paintings or appliqués, and the shoe rack is ready. But it is important to sand the product well so as not to be injured by untreated wood during operation.

DIY shoe rack (video)

Making a shoe rack from scrap materials is not difficult, the main thing is to start! A self-made product will not only be functional, but will also delight you with its original appearance.

When choosing new furniture for the hallway, a person strives to purchase good option. But quickly finding a bedside table suitable in color, size and content for the hallway is not so easy. It's better to make it yourself. Further in the article, a unique master class is presented: a shoe cabinet in the hallway with your own hands and without unnecessary problems.

A bedside table for shoes should correspond to the home owner’s ideas about the beauty, practicality and functionality of interior items. But purchasing a finished product with such characteristics is not easy. Therefore everything more people prefer to create furniture for the hallway with their own hands. This way you can get a comfortable, durable and beautiful cabinet or a shoe rack. And it will be created from the type of wood you have chosen, and painted in the desired shade. You can also think about actual content.

To be fair, we add that completing the task requires certain skills. But with desire and diligence, anyone can cope with it. Next, we’ll talk about how to make a cabinet for the hallway yourself and what you need to have.

Required tools and materials

An umbrella stand or a shoe cabinet are integral components of the interior of any hallway. You don’t have to buy them ready-made or order them from other craftsmen, but you can make them yourself. To complete the work of creating such furniture, get the tools.

A shoe stand or cabinet can be made if the craftsman has the following materials:

• furniture panels, the size of which suits the parameters of your hallway;
• boards;
• slats;
• plywood sheets. Optimal thickness— 6 mm;
• loops for fixing the door of the shoe cabinet;
• handles mounted on the door of the product;
• dowels made of wood.

Creating a single door shoe cabinet

A shoe stand can be made with your own hands and in a fairly quick time. Let's consider step-by-step production do-it-yourself single-leaf bedside table for the hallway country house or a city apartment.

Preparatory stage

First you need to determine the desired height future product. Then, a pair of sides are cut out from a plywood panel, on which markings are previously made with a simple pencil. They should be the same size, equal to the selected height of the bedside table.

Pay attention to the presence of plinths in the hallway, because in this case, the side panels on one side need to be carefully cut down. This is necessary so that the finished bedside table fits tightly to the wall surface.

The upper part of the product must also be cut down, and this must be done at an angle. So that top cover There was a little narrower than the main bedside table for the hallway. The saw cuts are processed with finely dispersed sandpaper until completely smooth. The resulting panels should be fastened with hardware, matching the lower and upper bases for this.

Remember that the bottom base should not touch the floor. It is placed a little higher, veiling the gap with the front panel using wooden dowels.

The base needs to be fixed at the top where the beginning of the cut is located. The back panel can be made from a plywood sheet.

Making a door

The next step is cutting out the door for the future bedside table. To do this, use the same board as when creating the bedside table itself in the hallway. It will be of such a scale that you can place it on top drawer. You should drill holes in the side panel from the inside of the cabinet and fix the hinges for the door in them. Thus, you will connect the frame of the product and the door to it with your own hands.

Remember, the hinges need to be selected so that the door closes at the same level as the frame. But it is better not to purchase hinges that move the doors to the side when closed.

Boxes for shoes and runners for them

The runners for the drawers of the future bedside table are cut out of sheets of plywood, and they are attached to both sides of the frame. They will have drawers inserted into them, in which it is convenient to store shoes. The plank for the box is made from the same plywood. It must fit into the holes of the runners, as well as back panel and the sides of the box. The front panel of the product is made from furniture board. Its size should be slightly larger than the width of the box itself.

Fastening accessories

And to complete the work, the structural elements of the drawer will need to be fastened with self-tapping screws, and the front panel will need to be attached after opening it with varnish and fixing the handle on it. Features of fastening the fittings depend on its design. But most handles are attached to the panel using the same self-tapping screws inserted into special holes on the product.

The cut out top cover of the product should be secured with dowels and glue. The legs can be purchased ready-made at a furniture store and all that remains is to secure them by first drilling four holes in the corners of the bottom. Handles and decorative elements are attached in exactly the same way, giving the product a special charm.

To fix various overlays, regular PVA glue and small furniture nails are suitable. The shoe cabinet for the hallway of a country house or city apartment is ready for use.

How to protect the coating from external influences

You can extend the life of a homemade hallway bedside table if, at the cutting stage, structural elements from door boards and plywood sheets, coat all parts with varnish. Paintwork increases the resistance of wood to increased levels of indoor humidity, as well as mechanical damage.

It is bad to paint the product after assembly, since you may not be able to achieve high aesthetics and thoroughly paint all areas.

How much money will it take to make it yourself?

In fact, you can make interior items for the hallway of your country house or city apartment yourself without spending much money. The average cost of a sheet of plywood with a thickness of 6 mm is 260-570 rubles. Unsanded plywood is cheaper. But such material is not highly aesthetic and requires additional sanding before painting.

Laminated plywood sheets are considered the most expensive. They are resistant to negative factors and are attractive in appearance, so a shoe stand made from them will look great.

A shoe rack, also known as a shelf for storing shoes, should be present in every home, otherwise the hallway will be in complete chaos. By placing your shoes on a special shelf or putting them in a drawer, you maintain order and cleanliness in your home and protect your shoes from attacks by pets. Furniture stores offer a wide range of products similar designs, however, it is not always possible to select suitable option for the interior, or the cost of production is prohibitively high. In this article we will look at several options for creating a stylish and functional shoe rack with your own hands.

The most important requirement for a shoe rack is the ability to accommodate the daily shoes of each family member. That is, a modest small cabinet is suitable for a bachelor, but for a family of 3-4 people, the size of the shoe rack should be appropriate. The main problem with store-bought models is that most of them were produced in China, where, as you know, they have a weakness for everything miniature and compact. In this case, compactness is not synonymous with ergonomics, so you have to pick up a hammer, boards and learn how to make a shoe rack with your own hands.

Another drawback of almost all shoe cabinets offered by stores is the complete lack of ventilation. Imagine this situation - you came home on a rainy day. autumn evening Friday, took off their shoes, put the wet shoes on the shelf and set out to spend the whole weekend at home. By Monday, when you have to go to work again, wet leather shoes will take on a very deplorable appearance. Ventilation is extremely important to keep shoes in good condition and extend their lifespan.

So, what qualities should an ideal shoe rack have:

1. Ergonomics - a shoe closet should not take up half of the hallway.
2. Functionality - this includes the concept of capacity and use for other purposes. For example, you can sit on the cabinet (the role of a stool), put things (the role of a bedside table), and a shoe rack with a mirror will become a kind of dressing table.
3. The presence of good ventilation - we are not hinting that it is necessary to install fans and pipes inside the cabinet; it is enough to simply ensure the flow fresh air naturally.
4. Aesthetics – appearance and the design of the shoe rack should be in harmony with the interior.

All shoe rack designs described below fully comply with these requirements.

Shoe dryer

This shoe rack will appeal to lovers of simple and practical solutions. The classic hanging dish dryer was taken as a basis. Why not? The structure does not stand on the floor, which means you can easily clean under it. The shelves are not solid, but in the form of grids made of of stainless steel, which means that water will flow quietly through the bars of such a metal shoe rack or melted snow, they can be quickly washed by wiping with a cloth. This type of furniture looks quite original and minimalistic - no extra bulky doors, legs or decorative elements. This option is perfect for an apartment in high-tech and loft style.

Helpful advice: If pets live in the house, it is better to make lightweight doors to protect shoes. To do this, use glass or plastic.

The best part about working with your own hands is that you can customize any size you want. So, when drawing up a shoe rack, consider what shoes you use most often. For example, if a fisherman with feet size 45 lives at home and uses high boots every other day rubber boots, then the dimensions of the shelf must be appropriate. Upper part Such a “drying rack” can be reserved for slippers or light shoes. You should not put dirty or wet shoes there, so as not to damage the shoes on the floor below.

To make such a cabinet you don’t need to buy anything at all. whole sheet Laminated chipboard - ordinary furniture panels are enough. They can be found in any construction supermarket, and the boards are already completely ready for assembly - they are glued with an edge and sawn into equal parts. We will not specifically write the exact height and width of the shoe rack so that you can create an individual drawing for your home.

The second thing to take care of is metal mesh. They are also sold in construction stores. The standard mesh widths are 46.4 cm, 56.4 cm, 76.4 cm and 86.4 cm, but non-standard ones can be ordered (this will cost a little more). If you take shelves with a maximum width of 86.4 cm, then external dimensions a cabinet with 4 shelves will be as follows (HxWxD): 120 x 90 x 34 cm. A depth of 34 cm is enough to fit size 45 boots.

Important point: To increase the functionality and compactness of the shelves, place them at an angle inside the cabinet. This way the water will flow in the desired direction, and the cabinet will take up minimal space.

What parts are needed to assemble a shoe rack:

• sidewalls 118.4 x 32 cm – 2 PC(standard furniture board for the manufacture of wardrobes);
• facades 119.5 x 44.7 cm – 2 PC(you can buy straight laminated chipboard panels or figured MDF facades);
• top cabinet cover 90x 32 cm – 1 PC;
• drawers 86.8 x 10 cm – 2 PC(also sold in furniture stores);
• back wall 119.5x 89.5 cm – 1 PC(it is better to make it from thin and cheap hardboard).

All that remains is to buy the necessary fasteners and assemble the shoe cabinet. You don't even have to saw anything - everything finished parts already on sale!

Fittings and fasteners necessary for shoe dryers:

• confirmat 5x 70 mm – 8 PC;
• metal furniture corner – 8 PC;
• self-tapping screws 4x 16;
• 4-hinge furniture hinges – 4 PC;
• dowels and facade handles - at your discretion.

To work, you will need ordinary tools that are found in every owner’s home - a drill, a screwdriver, a hammer.

How to assemble a shoe rack:

1. With help confirmations pull the drawstrings to the sides of the future shoe rack. In the side panels for confirmations, drill through holes 8 mm in diameter, in the end parts of the drawers, also make holes with a diameter of 5 mm and a depth of 55 - 60 mm. Drill so that the holes line up exactly.
2. Screw half the number of corners to the top roof, and use the remaining 4 instead of wall fasteners, attaching them to the back side of the sides.
3. Screw all parts with self-tapping screws. Before fixing the hardboard, check the evenness of the box geometry - its diagonals should be equal.
4. Measure 15 cm at the top and bottom and 2.2 cm deep on the vertical sides of the facades. At the marked points, make holes for furniture hinges with a diameter of 3.5 cm.
5. Install the doors and screw the handles.
6. Hang the cabinet at a height of 12-15 cm from the floor so that you can tidy up underneath it. The distance between the bottom and second shelf must be at least 35 cm in order for boots to fit there.

Helpful tip: In rainy or snowy weather, place a tray under the shoe rack to prevent water from dripping onto the floor.

Compact shoe rack

In this chapter we will describe step by step process creating a very original, miniature and elementary shoe rack. It will suit any interior design, and even children can be involved in the decorating process. Shoes on such a shelf look very neat, and it is simply impossible to create a clutter there.

Even someone who has never held one in their hands can handle the creation of such a narrow shoe rack. carpentry tools. You don’t even have to ask your neighbor for a hacksaw - just make a drawing with the right sizes and ask to cut the boards in the same construction store where you bought them! The only thing you can't do without during assembly is a drill.

To build a compact shoe rack you will need the following tools and materials (we provide dimensions for a design that is suitable for a bachelor or a young couple):

• the simplest long shoe brushes with stiff bristles size 160 x 40 mm – 3— 5 PC(depending on the length of the future shoe rack);
• moisture-resistant plywood 12 mm thick: 1020x 370 mm – 1 PC(A ); 1020x 90 mm – 1 PC(IN ); 1020x 130 mm – 1 PC (WITH) ; 90x 118 mm – 1 PC(D); 1020x 60 mm – 1 PC(E);
• spikes 6 mm – 6 PC;
• wood screws;
• construction wood glue;
• acrylic paint;
• moisture-resistant transparent varnish;
• brush;
• dowels

You can decorate a shelf not only acrylic paints, even a regular one will do gouache, if you then immediately open it with transparent varnish. If you want to avoid varnish, use enamel. And if you like a beautiful wood texture, you can simply cover the shoe rack with clear varnish, slightly tinted with stain.

How to make a shoe rack:

1. Assembly should begin with an element containing brushes. Drill 6 through holes in the edge of the plywood.
   
   
2. Insert six spikes coated with glue into the resulting holes.
   
   
3. In plywood WITH make exactly the same holes, coat it with glue and connect it with plywood B. It would be best to compress these elements with clamps until the glue completely hardens or simply install some kind of weight on them.
   
   
4. Glue the sides of element D to the resulting structure in the same way. After each application of glue, firmly compress the parts to be glued.
   
   
5. Using a wood hacksaw, saw off the handles of the brushes, if any (it is better to immediately buy the cheapest brushes without handles).
   
   
6. Drill 2 through holes in each brush and screw them 1 cm from the edge of the structure with short self-tapping screws so that the caps are on inside brushes
   
   
7. Make through holes with a drill in the unused parts of elements A and E, as shown in the image below.
   
   
8. Using self-tapping screws, connect all parts of the shelf to the end.
   
   
9. Paint the shoe rack the color you want or paint it different colors. In our case, the result was a monochromatic bright green design, but you can ask younger family members to participate in the process or paint the plywood yourself. If the ability to fine arts no, you can do decoupage or assemble a mosaic.
10. All that remains is to drill holes in the wall for the dowels and hang the shoe rack.
    
    

Shoe rack made of PVC pipes

Finally, we have prepared for you the most unusual and exciting master class on creating (let’s not be afraid of this word) a creative shoe rack for the hallway. With this design, you can always keep your home clean and tidy, and even children will be happy to put their shoes “in the house.”

What is this wonderful shoe rack made of? You will be surprised, but these are the most common sewer pipes made of polyvinyl chloride, which are found in any modern city apartment. They cost much less than quality wood or moisture-resistant plywood, they are characterized by an almost eternal service life and ease of installation.

For one such shoe rack you will need one sewer pipe 300 mm in diameter. The standard length of such a product is 3 m. To make a roomy and deep enough compartment for an adult’s shoes, 30 cm is enough. This means that from one pipe you will get as many as 10 shelves.

Cutting a PVC pipe will not work special labor. To do this, you can use a regular hacksaw with a fine tooth. Mark the surface with a marker and divide into 10 equal parts. Every piece of pipe On the one side sand with sandpaper to smooth sharp edges. The second end will be adjacent to the wall, so we need to sand it not at all necessary.

Since such round posts very much resemble stumps or logs, we decided to decorate them accordingly - by making an imitation of birch bark. Of course, you could draw it, but it’s much easier and faster to cover the pipes with wallpaper with a suitable pattern. You can decorate the shoe rack however you like. For a monochromatic “gray” hallway, shelves in bright, saturated colors are suitable; for a modest square, it is better to slightly shade the shoe rack by painting it black or dark brown color. Before PVC painting It is advisable to degrease so that the acrylic or gouache lays evenly.

All that remains is to glue all the pieces together epoxy glue. First, glue 4 pieces horizontally, placing them on a flat surface. For a more secure fixation, press them together with clothespins or clamps, which can be removed after the glue has hardened.

Glue the next 3 blanks onto 4 pipes, and then the rest like a pyramid. In fact, the gluing sequence and the number of pipes in rows can change at your discretion. Epoxy glue is very strong, and if you glue the pipe with it well, it will not fall off even at an angle or when suspended. So this is a great opportunity to get creative.

An alternative way to create a shoe rack with your own hands from PVC pipes in video format:

Shoe rack: photo

There are a lot of options for shoe stores, but if you don’t know where to start, go to the nearest furniture store and take one of the proposed models as a basis. You can turn an ordinary “boring” shelf into a functional shoe rack with a seat, mirror, hanger or additional drawers for brushes and creams. But before you go shopping, we suggest you get inspired by the following photo selection: